Quick Way to Clean a Brother Laser Printer Fuser Roller

[@imajeenyus42]

Just wanted to say thanks for your other video on cleaning Brother toner cartridges - I have a compatible cartridge that was printing extremely light, and with streaks down it. It turned out there was built-up residue on the doctor/wiper blade, and once that was cleaned off, it works perfectly again!

[@dianaramirez3216]

Hi, what is the video you mention?

[@JoyinFlorida]

So glad I found this channel....I just replaced my Brother 5200DWT because the toner wasn't sticking, spotty, and roller lines (sometimes) down the pages. New printer....2,000 pages later, SAME THING 😣 I'll try this tomorrow and search your channel for more options? Very frustrating....I sometimes print 2,000 pages week for work and it's just not professional to have the toner splotchy and rub off😣

[@mariecyree8153]

I want to thank whomever made this tutorial, I had already cleaned the roller in the front of the printer and the black line was still there. I did not know there was a roller in the back of the printer, I mean, I’m no printer technician but I can troubleshoot with instructions, so I followed this tutorial to the T and success. No more black line, so thank you very much!

[@terry_willis]

I used 91% isopropyl alcohol and it worked fine. A little tedious getting to the orange roller, takes a little time, but very do-able. I have a HL2240 - did not remove the back cover.

[@conradvink]

This was extremely helpful and enabled me to clean inside my Brother DCP-7055 laser printer. It is now working great again

[@1pp0filippo]

Grazie mille! Hai spiegato perchè il fusore va pulito e sei il primo ad aver specificato che le stampate dei fogli precedenti che ricompaiono sono dovuti a quello. grazie!!

[@dianewhistler8992]

Thank you, Thank you, Thank you!!! This was a well produced video delivering clear information. I quickly and easily fixed my printer and it is producing clean prints again!

[@v.n.4276]

Thank you for the video - If after cleaning the drum and the fuser roller and I'm still getting streaks and smears, does that mean I need to replace my diffuser?

[@viandant5]

Probably you have to change the fuser unit. The cleaning does not solve the problem is the rollers are defective or worn

[@hoopears]

there is black ink on thw orange roller of my MFC-L2730DW that i have been trying to clean with alcohol and q-tips and a wipe but it is basically the same. the ink doesn’t budge off the orange roller! and ive already cleaned the drum so i know it has ro be that orange roller bc it has so much ink on it! any tips?

[@viandant5]

It's a fuser roller I think. not possible to clean it, you have to change the roller

[@ps-yk8su]

Better than official Brother videos

[@ericrosales9722]

I tried using qtips with 99% isopropyl alcohol but the black bands on my ricoh 3510dn hardly came off and mostly still there. It was a day after running the printer so it was quite cold...maybe i need to run the printer to warm it up before attempting to clean? Or can i scrape it with something without damaging it? I dont want to worsen the problem of faint black stripes running down along the margins.

[@viandant5]

A cleaning doesn't solve the problem if the rollers are damaged. probably you have to change the fuser rollers

[@ericrosales9722]

@@viandant5 I think you're right as i was able to remove some ink but see there appeares to be permanent damage on the rollers. Thanks much for your feedback.

[@BobRoberts-yd3wm]

Hi thank you for this video. I just cleaned my rollers and when I printed, they got dirty again and the same issue happened. What am I missing?

[@viandant5]

If the fuser rollers are worn or defective, a cleaning will not solve the problem

[@mariannegennis6181]

Great video. I've cleaned the fusers and big rollers but my blank area when printing matches up with the small center white small rolling thing (not the printer drum or fuser roller). I don't see anything blocking it. Anything else I can check? Brother model HL2370. Thanks.

[@viandant5]

Did you ckean the corona wire of the drum unit?

[@mariannegennis6181]

Thats the little sliding thing that does back and forth across the unit? Yes!

[@viandant5]

@@mariannegennis6181 I think you should try to clean the glass of the laser scanner under the drums

[@mariannegennis6181]

@@viandant5 I'll give it a try.

[@muyadinmuyadin6133]

Thanks great tutorials, excellent. I have a brother machine, MFC L8690CDW and after unused for a while it won't turn on only blinking green light with small clicking sound, but when open the front or back door it switches on and displays front or back door open, when close it turns off itself with small clicking sound and blinking green light. What could be the problem here please? Is it something to do with the circuit board?

[@viandant5]

It can't exit initialization. it could be the fuser unit, a defective drum or toner cartridg, may be the main board. it's difficult to say

[@tamaragerken8681]

Would have been nice to see a before print job and an after print job.

[@androjesus]

How do you call the part on top of the Fuser Roller?, Mine got a paper jammed, someone pulled hard enough to break a little plastic from the top part with the little white wheels, but I have no idea how its call so I can re-order it. Thank you in advance.

[@viandant5]

You mean the upper fuser roller?

[@tylerguitar75]

I did it but the paper has even more black lines now. I think my fuser might need to be replaced? I've got a Brother HL-2320D

[@viandant5]

Are you sure the black limes are due to the fusers? Check the drum unit and the toner cartridge too. However a cleaning cannot solve the problem if the fusers are worn or defective

[@eunyoungchae2621]

The ink tank system appears to be much better than the cartridge system kzbin.infoUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 and a lot cheaper to run. The machine was easy to set up. A small point but I thought they'd be a USB cable included to help with the set up but there was none. I've been using it now for a few weeks and it seems like a good product and superior to my previous printers which were all troublesome HP machines.

[@de-ox7ii]

can I install a hl-2270dw fuser unit on the mfc9330cdw?

[@viandant5]

no, it's not possible

[@chaoskitten]

Thank you! I appreciate this video! Fixed my issue!

[@pravardhanus]

How to clean the fuser in Samsung ML-1630?

[@viandant5]

Open the cover, the fuser are exposed and you can use this method

[@gabrielchristopher9363]

Am having a vertical line on both sides of my A4 paper after printing or photocopy. I have clean the end point of the developer roller but it doesn't solve the problem. Maybe the next thing I will do is to check the fuser roller as shown in this video. Can i use this same method for Brother printer DCP 8065 DN ?

[@viandant5]

Probably the problem is the laser scanner, if the problem is only when you copy or scan a document

[@gabrielchristopher9363]

@@viandant5 The issue is the Fuser roller. I had to follow this video to open the back of the printer where the fuser roller is located and I discovered It is worn out with ring line on both ends of the roller. It will need replacement. I strongly believe that if I replace the affected roller, the vertical streak lines will disappear from both sides of the paper during print or photocopy.

[@viandant5]

@@gabrielchristopher9363 I understood that the problem was only when you copy or scan. I think you have to replace the roller or the fuser unit. Cleaning a worn fuser roller is useless.

[@gabrielchristopher9363]

@@viandant5 Exactly, I have clean and clean it but no improvement. I will see if I can source for a roller or a complete fuser unit in a local store. Thank you so much sir

[@ravibabu1986]

how to fix gear noise in brother hl-l6200dw printer

[@viandant5]

may be are the fuser gears. you can try a bit of grease

[@ravibabu1986]

how to fix paper wrinkled in brother hl-l6200dw printer

[@viandant5]

kzbin.info/www/bejne/jYTJooyfd7yfaZI

[@MicaMercado]

hi there mr Viadant5, may I ask for help. my Brother HL1110 not printing properly, always halfway or only 1/4 of the paper. the paper will stuck inside always.. what is the problem with the printer. please help me to solve that. thank you

[@viandant5]

Check where the paper is jammed. may be there is a foreign object or something else. In this channel you'll find a video about paper jams

[@garymoore3159]

Howdy! I have a Brother TN-450. I have used it for 4-5 years with no issues until yesterday. It prints 2/3 of page and the jams. The top of page is curled and quite warm. I have to pull quite hard to get jammed paper out. I would like to FIX the printer rather than abandon it to junk pile. Any advice would be greatly appreciated! hello from Nakusp, BC Canada

[@viandant5]

I think the problem could be the fuser unit. check the rollers or the pick up fingers

[@garymoore3159]

@@viandant5 Should I just replace the fuser unit?

[@garymoore3159]

@@viandant5 The fuser roller is in good shape. Better than one in video. Paper feeds about 1" out of fuser and stops dead. Print is good for 2/3 of page. If it feeds good enough to print 2/3 of page, what could be stopping it from feeding the rest of the page? Grrr! Ha Ha

[@viandant5]

@@garymoore3159 It could be a paper sensor, and are you sure the paper size in the settings is correct? There is a little lever that detects the paper, may be is broken

[@katherinea9372]

I've opened and cleaned everything I can now and I still get two lines and very dusty prints. The toner and the drum is new too. I don't know what more I can do to fix it.

[@viandant5]

But which printer?

[@katherinea9372]

​@@viandant5 Brother HL-2240

[@viandant5]

@@katherinea9372 The cleaning is useless if a component is damaged, as the drum

[@Hordunjimmy8755]

+#:÷+

[@SwandhanaGaming]

Sir i want to ask .. How to clean upper fuser brother . It made like a glass ..??

[@viandant5]

There are ways to remove it from the machine, it depends on which printer do you have

[@marifelago8023]

Hello, my brother dcp l2540w when turned on smells something that its burning, what should I do about it? Should I change the hot and fuse rollers? Thank you.

[@viandant5]

No error codes, no print defects, is the printer working? I think you can use the printer without any problem

[@marifelago8023]

@@viandant5 yes sir, it works fine but sometimes it doubles the images that is being copied.

[@viandant5]

The smell and that defect is due to the fusers, but the smell is not a problem

[@marifelago8023]

@@viandant5 Thank you so much! 🥰

[@sadiai3144]

my pages come out really hot to the touch that the paper starts to curl in a circle, what is causing this problem?

[@viandant5]

I don't think te fusers are defective, you would have an error message. May be the paper is dump or the printer is in a humid environment

[@sadiai3144]

@@viandant5 no its not humid and the papers are expensive brand, they come out really hot that they start to curl.

[@viandant5]

@@sadiai3144 Which printer?

[@Snowbird-oz6nj]

Hi, I have hardly used my printer. And yet got the self-diagnostic message. I bought this printer in France but shortly moved back to Canada, does this means that my printer needs a converter?

[@viandant5]

Which diagnostic message? Which printer? American toner cartridges could be refused in European printers

[@alamagordoingordo3047]

Ho una Brother HL-3140CW non riesco proprio a visualizzare i livelli dei toner in windows 10.

[@viandant5]

Si dovrebbe fare dal pannello di controllo

[@alamagordoingordo3047]

@@viandant5 Si ma dove? ci ho provato e riprovato man non si trova.

[@anandsurpur8072]

I have km1620 copier. 5,28,000 cps. From some months toner dots spreading on the print. After cleaning blade & drum again problem stats at every 500 copies. Awaiting reply...

[@viandant5]

It could be the recovery blade detached or defective. The recovery blade is the blade near the wioer blade

[@anandsurpur8072]

@@viandant5 where is recovery blade? Only one cleaning blade near drum. That is also changed with new one. Still problem persists.

[@viandant5]

@@anandsurpur8072 Parallel to the wiper blade there should be a thin tranparent mylar blade

[@anandsurpur8072]

@@viandant5 At present no mylar blade near clng.blade. Any alternative application?. Ex.double side foam tape?? Any other ,hints please.

[@viandant5]

@@anandsurpur8072 Check the toner roller and the side felts. they could be worn, check if there is toner powder there

[@LoriAnneBrown]

thank you! This solved an issue I had with my mfc-L8850cdw printer

[@MiscreantApril]

When you cleaned the roller....what was your printer doing that caused you to look up this video? We have the same model and the paper is jamming on this roller every 3rd copy after the paper jam is removed. Paper is also showing a slight "burn" mark across the paper. Thanks for your response.

[@calvarymarketing2566]

It's a bit of a tight squeeze in the rear. How do I get my fingers in there more comfortably?

[@viandant5]

I think it would need a bit of grease (very little) on the gears

[@aldo-228]

Use skinny fingers next time...😉

[@456zounds]

The "Brother" people said that the isopropyl alcohol had to be 70% or more. Won't the 50% stuff work?

[@viandant5]

50% there is lot of water, you have to dry it after the cleaning with a soft cloth

[@majidabedini1781]

Hi, Hope all is well with you. I changed and replaced my printer hp laserjet 600 M603 fuser a couple months ago and it was working well until now and I got error 50.2f.00. I turned it off several times and also cleaned it up as your recommendation but still doesn't work. please advise me by return. Thank you

[@viandant5]

try to remove the fuser and rotate the gears by hand. Check if the thermistor is dirty

[@sunilvimal2772]

can we clean fuser roller with patrol

[@viandant5]

petrol? no

[@sunilvimal2772]

@@viandant5 but I do it the same and now I am facing more problems so what i should do now

[@viandant5]

@@sunilvimal2772 try to clean the rollers with alcohol, may be it will remove the substances or the petrol. try uto print a few white sheets

[@sunilvimal2772]

@@viandant5 ok sir thankyou for the advice

[@moviemagic8002]

Is there anything I can use to clean apart from alcohol?

[@viandant5]

there are cleaners made especially for fusers. Alcohol doesn't leave substances on the surface of the rollers

[@jherbach]

@@viandant5 Do you have specific suggestions on what kind of cloth and alcohol? Other sites suggest 70% isopropyl alcohol will take a long time to dry or have other problems.

[@viandant5]

@@jherbach It's not a problem on a fuser roller if it takes more time to dry. Any type of soft cloth even paper cloths will work

[@akshayakodumon7790]

sir my printer is brother is 2520d ,problem is paper folding continues plz give solution

[@viandant5]

Where the paper is folding? In the fusers?

[@akshayakodumon7790]

PAPER COMING OUT WITH wrinkles

[@TheVaccini]

Thank you!

[@saiammarahulmonish3656]

one side problem brightnes low plz

[@viandant5]

Which printer?

[@kanatilahun4164]

How to solve paper jamp fuser unit

[@shirosurfer8864]

What's the last song?

[@viandant5]

I don't remember, it's in the KZbin audio library

[@187vikassingh9]

My printer is DCP-B7500D I have replaced the old drum by a new drum but the life of drum is not increases Plzzz help me.

[@viandant5]

You have to reset the counter. in this channel you'll find the instructions

[@187vikassingh9]

@@viandant5 i got solution Thanks sir

[@uoohoo99]

Can't you take the roller out?

[@viandant5]

Yes but this is a quick way

[@MainhoonGiyaan]

Sir, could you please provide the online buying link of the fuser assembly unit of Samsung ML1676p

[@viandant5]

Try amazon or ebay

[@Bob-Fields]

Dude, this is a Wendy's.

[@emzywillrich7243]

Thank you. This will help a lot.

[@carlosaquino4805]

Muy buen video entendible un diez bro 🎉

[@rahulupadhyay9928]

Thankyou

[@pier9280]

Ciao, ho visto il tuo vecchio tutorial sul refill di cartucce per brother HL-2035 come la mia. Chiedo qui perché è di 7 anni fa... Ho una cartuccia compatibile economica che stampa sbiadita una larghezza di quasi metà foglio nella parte sinistra. Ho verificato meglio stampando una pagina completamente nera, si vede bene la banda sbiadita, continua da cima a fondo della pagina. Ho anche stampato la stessa paginata nera con una cartuccia brother originale e la banda sbiadita non c’è più. Il problema quindi è la cartuccia economica, non altri componenti come tamburo, fusori e similari. Tra l’altro il selftest dice che il tamburo sarebbe al 90% della sua durata: ho la stampante da tanti anni, ma stampo praticamente nulla. Domanda 1: Si può “aggiustare” la cartuccia che stampa sbiadito? Come? Quale può essere il problema? Dmanda 2: Vorrei tentare un refill della cartuccia originale che ho, oppure anche di una compatibile. Mi consiglieresti un buon barattolo di toner per il modello della mia stampante, possibilmente non troppo caro? Oppure me lo sconsigli ed ti pare più conveniente andare di cartucce compatibili? L’obiettivo è banalmente una qualità di stampa decente al prezzo più contenuto possibile. Grazie dei video! PS. Dovrei mettere mano anche ad una epson probabilmente ostruita di inchiostro, ma eventualmente chiederò prossimamente se mi ritroverò nell canne.

[@viandant5]

Si può provare a smontare la cartuccia e pulire la lama del rullo dtoner, forse c'è del toner incrostato. Poi si può pulire il rullo toner con una passata veloce di alcool isopropilico

[@pier9280]

@@viandant5 Grande! grazie della risposta! E per quanto riguarda la domanda 2 cosa dici? Può convenire di più un refill di un'originale o meglio andare di cartucce compatibili? Eventualmente hai un consiglio su un barattolo di toner per refill? Grazie ancora! PS. Per la epson intasata ho sbloccato la situazione con Quasar vetri e una siringa. Più cambio cartucce: evidentemente finche erano itturati gli ugelli me le vedeva come piene, poi stappandoli forse le ha rilevate come vuote. Ad ogni modo prese compatibili a pochi euro e le stampe di prova funzionano!

[@viandant5]

@@pier9280 Dipende se hai tempo meglio la bottiglia di refill, altrimenti le cartucce compatibili che comunque costano piuttosto poco

[@MsLDouce]

Thank you!!!!!!!

[@megansummers1154]

Thank you for this. I think this is going to fix my problem. 🤞🏻

[@jeonfrank546]

Good job !!!

[@arrianranger5800]

Just what I need but sure HATE that robotic voice! Thank you

[@viandant5]

my voice is worst

[@Crocodonk]

Who da man? You da man!

[@MysticalHeartless]

So this is what Tommy Vercetti was doing in the late 50's and early 60's.

[@kadec100]

i use contact cleaner like wd40, faster cleaning the fuse roller, then wipe with soft clothes with glass cleaner to remove contact cleaner residu

[@viandant5]

Thank you for the suggestion

[@ndb_1982]

That is hilarious. You will ruin it.

[@akshayakendram4131]

sir my printer is brother is 2520d ,problem is paper folding continues in fuser plz give solution

[@viandant5]

Try to clean the pick-up fingers, may be there is toner or dirty on them. Check if the rollers are damaged. kzbin.info/www/bejne/jYTJooyfd7yfaZI