Racing pigeons loft sputnik trap outside set up-part 2

In this video I show the making of the outside aviary for the racing pigeons loft. This is part 2 of the sputnik trap set up video.

[@LiathBahjatNorCal]

Thanks for the Video! Watched today at morning, left work and went back home built one for my young birds.

[@Rocky.Ridge.Pigeons]

That’s great I’m so glad the video was a help to you. All the best, my friend.

[@jaylee2016]

Great update my friend. Ideas really creative. The boys helping out that's good too.👍

[@Rocky.Ridge.Pigeons]

Thanks Bro, keeping the boys busy! 💯

[@pa8554]

สาระดืครับ goodanfin so.....

[@gpsloft5868]

Nice choice of the paint color! It’s looks really cool 😎 That little piece that sticks out to hold the landing board is so clever as well! You done did it again Mike! Impressive 👍🏼

[@Rocky.Ridge.Pigeons]

Thanks Kalapatid 👍

[@dewsburyracingpigeonfancie4699]

great video mate keep us updated cheers

[@Rocky.Ridge.Pigeons]

Thanks for watching my friend.

[@rowesloft3476]

Mate that looks awesome I love it! Keep up the good work an great content

[@Rocky.Ridge.Pigeons]

Thanks, will do!

[@hamsflightskitbox3710]

Nice job, great work😊👍🏾

[@Rocky.Ridge.Pigeons]

Much appreciated my friend.😁🙏

[@robcploft5398]

That looks good great job ,👍

[@Rocky.Ridge.Pigeons]

Thanks 👍

[@honeymoonloft568]

Great videos! I love the decision you made on your racing loft landing board/aviary. I was torn on my loft also, and decided to do with a removable aviary cage that sits on a landing deck. (See mine at Honeymoon Loft). But I think I am going to change mine to a opening with landing board extension like yours. That will save me a lot of cage movements! Can't wait for you to get your race birds. It is a great sport, and you have outfitted that loft nicely. Congrats!

[@Rocky.Ridge.Pigeons]

Thanks for watching, It has been so much fun doing these things for the pigeons! check out my new racers. kzbin.info/www/bejne/mHmlZJeAi9WVY6c also I know you will like this little loft kzbin.info/www/bejne/l5Kxe3qbZbasjbM I subscribed to your channel and your loft is really cool also - I like the open air concept! have a great day my friend.

[@xiongguysloft9560]

man, your lumber skills are amazing, wished i had such skills also 👍

[@Rocky.Ridge.Pigeons]

Very kind words, thank you. Thanks for watching also.

[@fatherandsonlofttv]

nice loft design i love it!

[@Rocky.Ridge.Pigeons]

Thank you very much, and thanks for watching and commenting.

[@fatherandsonlofttv]

@@Rocky.Ridge.Pigeons your welcome and thank you for sharing your ideas.

[@whitehouseloft5205]

Nice job my friend. Thanks for sharing your video with us.

[@Rocky.Ridge.Pigeons]

Thank you too my friend!✌️

[@SimplyBasics]

wow! very nice.. looks great..

[@Rocky.Ridge.Pigeons]

Glad you like it, Thanks for watching and commenting.

[@redstarloft5211]

Great job Mike! That aviary look outstanding, ill be stealing some ideas from you haha

[@Rocky.Ridge.Pigeons]

Thanks buddy, It's all about sharing ideas. Don't worry I steal ideas from you also lol!

[@pizzaaria]

Very nicely made:)

[@Rocky.Ridge.Pigeons]

Glad you like it, Thanks for watching 🕊

[@pizzaaria]

Thanks for the nice videos I enjoy watching them learning a lot. :)

[@Rocky.Ridge.Pigeons]

Glad to hear it my friend. Thanks for watching and commenting.👍

[@pizzaaria]

Rocky Ridge Kennel & Loft Thank you for putting all that info for evryone to learn. 👍👍👍👍😘😘😘

[@briananderson2016]

Quality job well done 👌💪👍👍👍

[@Rocky.Ridge.Pigeons]

Thanks 👍

[@nishanth3492]

Good Job... Really Nice 👍👍👍👍

[@Rocky.Ridge.Pigeons]

Thanks a lot 😊, Glad you liked it.

[@delluis100]

Nice job Michael

[@Rocky.Ridge.Pigeons]

Thanks my friend

[@Rocky.Ridge.Pigeons]

Hows the rollers?

[@syedalimhaidernaqvi3899]

Neat and flawless effort.. love from Pakistan...

[@Rocky.Ridge.Pigeons]

Thank you from USA🇺🇸

[@GVJLofts2010]

Very nice workmanship. Birds will be very happy. GREG GVJ LOFTS KEEP THEM FLYING 🕊

[@Rocky.Ridge.Pigeons]

I hope they do their job now - lol. Thanks for watching my friend.

[@crisstianengay1112]

nice idea sir. from philippines

[@Rocky.Ridge.Pigeons]

Thanks for the comment, glad you like it.

[@maniekzkujaw2769]

Super 👍

[@Rocky.Ridge.Pigeons]

Thanks my friend, 😁

[@marksrollerpigeons4675]

love it

[@Rocky.Ridge.Pigeons]

Thanks 👍

[@danielvelez4001]

Nice trap

[@Rocky.Ridge.Pigeons]

Thanks Daniel 👍

[@tareqhossain433]

Good job

[@Rocky.Ridge.Pigeons]

Thanks 🙏

[@sdfsfklugi]

Built it took a while but thanks alot man

[@Rocky.Ridge.Pigeons]

Thats great, Would you be able to send me some pictures? - [e-mail] - I would love to see it!

[@dougmerc4060]

Thank you! Another awesome video. 👏🏼. How did you make the pieces of wood swing like that?

[@Rocky.Ridge.Pigeons]

thanks for the compliment, There is one heavy 4" screw in the center that it pivots on. Glad you liked the video. 🙏

[@mattgould1485]

That platform and aviary is awesome. Do you have a latch that holds the platform in place when closed? Also, do you just use a long bolt to hold the spinning support in place? I am going to build this!

[@Rocky.Ridge.Pigeons]

Hey Matt, I’m glad you like the aviary. The doors do not latch because they are heavy enough in my opinion to Stay shut you can add a latch easily if you like. And yes there is a heavy duty screw holding the support in the center. Best of luck building it I hope it turns out great.

[@212acres3]

I need to make some of those

[@Rocky.Ridge.Pigeons]

I hope the video helped best of luck my friend

[@pigeonworldforum3869]

Great Job, Plans on Building one Myself, will takes some Tips from Yours ........

[@Rocky.Ridge.Pigeons]

Cool, thanks my friend.

[@arcee33]

Came out great. How are the pups doing.

[@Rocky.Ridge.Pigeons]

Hey Arcee, thanks and the puppies sold out in 6 days. So I hope they are doing great. Thanks for asking my friend.👍

[@kennethbland4086]

Silly question! is the landing onto the wire ok for the birds feet? Great video and instructions. one of the best, thank you.

[@Rocky.Ridge.Pigeons]

I have not seen any problem with the pigeons feet and they have been on wire their whole life. I'm glad you like the video and found it interesting, thanks for watching

[@pirrgang]

Going to be starting my loft this week, it's going to be the second floor of my barn. Going to build this same type of setup. What were the dimensions that you used height and depth, and do you still like they size? Thanks

[@Rocky.Ridge.Pigeons]

I think I would go 3' deep because 2' is a little tight when they are all out there. 3 deep 2 high and 10' long. I'm glad you like the setup - thanks for watching and I hope your build goes well. I would love to see a picture when your done. [e-mail]

[@user-gh9xm3fx6o]

عمل جيد و متقن

[@ChickenWired]

Just curious why use nails as opposed to netting staples? Didn't know if there was an advantage to it in this type of build.

[@Rocky.Ridge.Pigeons]

The only reason is because I had them available and those are roofing nails which don’t tend to rest so I’m sure it would work well both ways but I always tend to use what I have on hand. Thanks for your comment and thanks for watching

[@ChickenWired]

@@Rocky.Ridge.Pigeons No problem. I get the using what you have for sure. Those bobs you made are real slick too.

[@CamDatanagan]

Great information... Can I share your video? Thank You

[@Rocky.Ridge.Pigeons]

Sure you can, Thanks for watching.

[@tkacer1]

Beautiful loft Can you provide a link or description of the galvanized wire mesh you used. Thanks

[@Rocky.Ridge.Pigeons]

Sure it is 16 guage - 1 x 1/2 galvanized. It’s great stuff. 👍

[@ronda33]

@@Rocky.Ridge.Pigeons I did see that in the video, sorry to ask. Thank you so much for responding. I ordered some from Amazon

[@chrismunro4385]

For an old man you move like the wind!! Fast and Steady😂😂

[@edluciano504]

I like the cage I would like to have the dimensions on the cage

[@monti409]

Do you have problems with the raptors?

[@joseaguirre7517]

Awesome job! Congrats! Are you going to race your whites? Or normal Racing pigeons! A Big hug !

[@Rocky.Ridge.Pigeons]

There are too many issues with my local racing club and also I don’t think they are going to race this season. I really don’t have any normal racing pigeons I was expecting to get 25 of the ones I wanted but that has been canceled. There’s always next year, and I am looking forward to it. Thanks for the comment you seem very nice.

[@prakashnanthur4907]

Nice

[@nugsymalone1247]

I'm new to this so, why did you split the coop in the middle? Is it for males and females?

[@Rocky.Ridge.Pigeons]

Yes that was the reason, I have since removed it and let the pigeons mingle. They seem to be much happier this way. Thanks for asking

[@truepatriot7983]

Mr. Rocky I want to make like this pigeons building Loft how much it will Cost please can you give some idea this pigeons building is Great and looks very strong

[@Rocky.Ridge.Pigeons]

The materials cost around 1000 - 1200. Thanks for the compliment!

[@truepatriot7983]

@@Rocky.Ridge.Pigeons Mr. Rocky do you make only for you Or you can make on Order for Customer ?

[@mohammedsayem2023]

How much cost for pigeons loft 10 by 12 ft can you tell me thank you

[@Rocky.Ridge.Pigeons]

If you build it yourself the materials will cost between 1000 and 1500. If you buy a shed that size it will be over 3000

[@edluciano504]

What was the size of the cage

[@Rocky.Ridge.Pigeons]

12x3x2

[@edluciano504]

Thank you have a blessed day

[@sdfsfklugi]

So the material is 2x3?

[@sdfsfklugi]

Whats screws did you use

[@Rocky.Ridge.Pigeons]

@@sdfsfklugi You should choose a screw size that is twice the width of the wood so in this case 3". The actual dimentions of this lumber is 1-1/2 x 2-1/4" because it's a 2 x 6 ripped in half.

[@sdfsfklugi]

@@Rocky.Ridge.Pigeons thanks alot, 1 more question you see how at 1:36 you drill the under and above the material how did you did this without hitting the two screws that hold the material together, and do you think 1x2 would work or 2x3 would work better, thanks so much for replying by the really apprecciate it

[@Rocky.Ridge.Pigeons]

@@sdfsfklugi I used heavier lumber because the unit was large and needed the strength to keep it strait. If you have a smaller one you could probably get away with 1x2 lumber. I didn't hit the other screws because I kept them offset for that reason. 👍

[@yllismakaj5734]

What are the dimensions of the pigeon aviary

[@Rocky.Ridge.Pigeons]

It is 2‘ x 2‘ x 9‘-6” long. When you open the landing board is 4 feet wide.

[@yllismakaj5734]

Thank you appreciate it's very nice. Aviary

[@garibaypigeonsloft1920]

you don't sell white pigeons I am looking for a pair

[@Rocky.Ridge.Pigeons]

No I don't have enough for myself yet. Thanks for asking.

[@Marvinbayani1979]

Great job sir but I don’t see much of your ventilization around

[@Rocky.Ridge.Pigeons]

You are correct Marvin, I have added ventilation since I made that video. Thanks for your comment.

[@Marvinbayani1979]

Rocky Ridge Kennel & Loft Great ideals I like the way you did on your loft + flat form + Sputnik

[@alohazona4797]

Nothing like left building

[@Rocky.Ridge.Pigeons]

I love every minute of it! thanks.

[@moisemomoi4842]

Pano po makadami ang itlog ng parapatik

[@Rocky.Ridge.Pigeons]

Thanks from🇺🇸

[@ggg-ir4pt]

😄👋💪😋🕊🕊🕊

[@Rocky.Ridge.Pigeons]

Thanks for watching 😀

[@martinsanchez9216]

No invento nada hace años exinten esas trampas

[@Rocky.Ridge.Pigeons]

Martin Sanchez 👍🇺🇸

[@edluciano504]

How deep is the frame the top how wide

[@edluciano504]

If there's no problem could you send me the dimensions on the page please I like it good setup

[@edluciano504]

What's the size of the screen cage you guys just built

[@mcabd8648]

Nice loft

[@Rocky.Ridge.Pigeons]

Abdellah Mechti thanks

[@mcabd8648]

@@Rocky.Ridge.Pigeons l m from Maroc Nice to for réponse