Thule EVO Clamp WingBar Evo Roof Rack Overview and Install

Ad-FREE, no fluff, subtitled installation guide for Thule Evo Clamp and Thule WingBar Roof Rack System.
🛒 Find Evo Clamp + WingBar options here: www.rackattack.com/thule/bare...
🚗 Fit Your Vehicle: www.rackattack.com/fit/
This vehicle specific, multi-purpose base roof rack fits the specified vehicle with a bare roof. The system includes two Thule WingBar Evo load bars, four Thule Evo Clamp feet, and a Thule Evo fit kit.
Each component is predetermined, tested and approved by Thule for the specified vehicle.
Locks are recommended and available separately in match sets.
The Thule WingBar Evo's internal structure creates an exceptionally strong load bar. Advanced aerodynamic design minimizes wind noise and drag. The upper T-track interface allows smooth installation and removal of compatible accessories. Thule fit engineers have predetermined the optimum bar length for this vehicle.
The Thule Evo Clamp is specifically designed for vehicles with a bare roof, the design features tools-free assembly and installs onto the vehicle securely with the included torque limiter tool.
The Thule EVO Clamp Fit Kit is engineered specifically for this vehicle with a bare roof. Custom shaped rubber pads rest directly on the roof at assigned locations and rubberized steel brackets grip to the vehicle's door frame.
The simplified three-part instructions are clearly illustrated to ensure confident assembly and installation of the roof rack.
🔗 Facebook: / rackattack
🔗 Instagram: / rackattack
🔗 Twitter: / rackattack
🔗 LinkedIn: / rack-attack
#RoofRack #Thule #RackAttack

[@rackattack]

🛒 Find Evo Clamp + WingBar options here: www.rackattack.com/thule/bare-roof-mount-rack-systems/ 🚗 Fit Your Vehicle: www.rackattack.com/fit/

[@JayJay-hb5rz]

Does it matter that the instructions say “without glass roof”?

[@rackattack]

@@JayJay-hb5rz Hello. Yes, it does matter, this indicates that a glass roof equipped model is not an approved fit. Thanks!

[@danawhite7052]

The best demonstration/explanation of this roof rack install that I've seen. Very well done! Thanks.

[@RKArchitects]

Thank you for this - It was the rubber inserts on the top of the bar that had me confused. I nearly tore off the wrong part. There is a strip that has small Vs on it - do not tear this off - instead dived the strip evenly down the middle! The clue was when you showed how the T bold slid down the middle of these two strips!

[@jrm8970]

For anyone having this problem, make sure you loosen the hex bolts on the clamps before mounting on the roof. My clamps would not fit in the proper locations until I did this

[@ayaraskovitch]

Thank you SO much for this comment!!! We were extremely confused and this comment saved us. Seems obvious in retrospect, but we're roof rack first-timers and probably would have been scratching our heads for a while without you!

[@rackattack]

Great advice and correct there are a lot of vehicles that the central bolt needs to be loosened off for the clip to wrap around the vehicle properly. One of my favorite how mechanically minded are you "tests" with new staff haha.

[@ryanhall9634]

Thank you!!!! I was stuck too

[@leepriebe4849]

Agreed lotsa doubling back on adjustments

[@hannahhasbrook8869]

I wish I had read this yesterday...

[@anneangersbach]

This was super helpful, especially confirming that I have to break the rubber lining apart down the center to actually install it as intended, since my installation guide was for the Thule wingbar, not the evo wingbar. Thank you very much :)

[@vah4k8]

Thank you! I did not notice this part and had been puzzled for hours.

[@caroljudy100]

Great video demonstration and instructions. Since your videos were so good and your prices were comparable to other dealers I wanted to support your efforts by ordering from rack outfitters. Ordering process was easy, delivery was quick. Thank You!

[@jrm8970]

Thanks for posting this - much easier than trying to follow the paper instructions provided!

[@marcyfogal7960]

Amazing. Your video was so so so helpful. The written instructions I received were nearly indecipherable. You made sense of the of the steps for me, and I now I am the happy owner of assembled roof racks. Thank you!

[@rackattack]

Glad it was helpful!

[@gopibble]

Thank you. I definitely feel more confident in my upcoming install.

[@johnluckwell1174]

Like many others here, I struggled to understand the instructions, which I suppose are designed to be universal to any language. However, the video was clear and precise, even considering the language difference between American and my Scottish lol Thanks. :)

[@alisonloughran2925]

Thank you. Could not have done it without you.

[@nicholasspeers1859]

Best tutorial on this I have found, thanks.

[@basecamplife5424]

I just put this on my Ram 1500..thanks for the video instructions!

[@bonobobros4960]

great job rack outfitters. got my roof rack complete with lock cores for $138 less than thule directly plus free shipping and great customer support including this tutorial. i hope this system is as great as I think it will be long term.

[@rackattack]

Thanks for the positive feedback, we appreciate your business!

[@UnitedPebbles]

How??

[@DanteDeGraaf]

Thanks for the video!! The clicking part was getting me a little nervous.

[@karljones9832]

Me too, 50 percent 100 percent what does that mean.

[@nalietmiranda7450]

I’m thinking about buying one of these roof rack systems for my car and I have to say your instructions are excellent very professional and understanding

[@Stewy359]

Using ours for the first time today (got 2 of them). So good!

[@UnitedPebbles]

Ja Miranda. It like having a mini pick up feature?

[@kimbyandrews5706]

Very detailled, well made installation video!

[@paulchevrier9961]

Very good video. You demonstrated the installation in a way that is easily done. Thank you.

[@rackattack]

Glad you liked it!

[@enricogrisafi9401]

Instructions from Thule are good, but I had to back off the torque screw on the clamp as far as possible to allow both clamps to fit at the same time and for the rubber feet to fit, when placing on the roof of the vehicle. Excellent video!

[@rickstein6091]

Extremely clear and well produced tutorial. Thank you.

[@rackattack]

Awesome feedback Rick, we hope the system works great for you!

[@karljones9832]

Thanks for explaining the torque tool clicking. The manual isnt clear especially when you are screwing something metal (coated) to your new car. Our locks in the uk are included, but we probably pay more for the kit to start with. Thanks for the video

[@earthcomedy]

well..that looked pretty easy. Thanks

[@NotJanine777]

Just bought this kit - great video - thanks.

[@traveler7353]

Has it worked for you? With kayaks? Luggage box? At highways speeds? I bought something similar and haven't used it yet

[@MrTomEhunt]

Excellent explanation of the whole process. I've got the same car too, so helped massively. Thanks.

[@wwoodyudet9567]

Brilliant video - thank you

[@piterpietrek5914]

Super instruction! Clear and easy! Tnx

[@jackmccallum335]

Thanks so much for this video. Ordered from your site!

[@lindonandlisa8114]

Another outstanding video thanks so very much

[@JimMathieson1]

I bought the whole lot 598 carrier , the evo wing bar myself. Its a great second to none quality system. The only thing wrong was Thule instructions are very poor. Now I am fairly handy at building things but this was tricky to understand. So thanks for the demo as I didnt even know the end caps were swing away and thats the rack been fitted for a few weeks.

[@847MicRoss]

There customer service is very poor.

[@oscaromarorozcosanchez9476]

Perfecto, gracias por la explicación.

[@SteveSzmilek]

Good video! Thank you

[@jonathandance7372]

Thank you - might I suggest the rubber feet are slighlty out of position relative to the bodywork?

[@spencer82rocks]

Thank you, I am thinking to buy a kayak or inflatable so then this is the first thing to purchase, we’ll explain and easy to understand, wow 😊😊

[@rackattack]

Glad it was helpful!

[@tomsimonis]

Thank you for the superb explanation!!

[@rackattack]

You are welcome!

[@RobertSmith-di5ll]

fantastic - just what I needed

[@DharminderSingh]

Great Video Thanks!

[@robpowell9162]

Hey great video! Really easy to follow! I do have a question, in case you read these.... I have just got a 2018 Vauxhall Insignia Grand Sport, and I have the right feet and pads, but my bar is "only" 127 rather than the reccommended 135. There's definitely more than 3"/8cm overhang in total for the Insignia, so can I use the 127 bar? Instructions say 46/E for spacing, can I add 1.5 each side and go for 47.5? (it's not chear if it's inches or cm mind!) Any help to retrofit would save me a tonne of cash! :)

[@sean8081a]

Can the door frame bracket scratch the paint or does it have a soft coating?

[@nazomzo]

Exactly what i was looking for. Thanks.

[@rackattack]

Glad it helped, if you have any specific questions please let us know!

[@Cill441]

Is it for a 2012 Kia Reo, fit wise?

[@jagermeister902]

Thanks! Good video.

[@josephdburdick]

If you added a wind fairing would you still be able to operate the moonroof

[@MarTeeNezNC]

This is a fabulous video and I've got my rack 3/4 installed on my car. Now what do I do if I "Y" setting for the rear bar says 35.5 for that slider underneath, but the clamps can't reach the edges of my roof at that setting? Distance from front bar is confirmed. I'm guess just wing it and split the difference so both feet are at the same setting and bar is equidistant on roof. It looks wonky. The rear bar looks way too far forward.

[@alexanderromero3752]

What is the correct bar length for the new 2020 Nissan Sentra and what clamp set? (kit Clamps)

[@clanmac66]

Thank you, great demonstration.

[@rackattack]

Glad you liked it!

[@ArcaneZay]

This video was very helpful thanks!

[@rackattack]

Glad it was helpful!

[@siminio7506]

Excellent video, thank you Sir!

[@rackattack]

Glad it was helpful!

[@Mafioso1731]

Is the pro bar better than the Evo bar despite it being more popular? Also how does the Evo bar compare against the edge bar?

[@arcticdepth]

Does the rubberized, fitted footpad have to be flush with the car? I got mine installed and two of them aren't completely sitting on the car as the diagram shows.

[@Andy-wt2iy]

Thank you. Very helpful video

[@rackattack]

Hope it helped get you and your gear out on the road!

[@kuyaboyred]

Can you guys please install one onto 2020 Camry xse

[@korbendallas1210]

Thank you for the detailed instructions. Does this metal mount scratch the paint?

[@ireu7591]

Great explanation. Thanks

[@rackattack]

Glad it was helpful if you have any questions don't be shy!

[@gilbertorobles3321]

Will this damage the rubber on the door seal of the car?

[@tylervandergriff6559]

Is the width between the front feet wider than the feet in the back? It looks like it’s saying my front should be 36 and my rear should be 30,5

[@uhN0id]

I have a 2024 Impreza RS and the mounting points for the rails I am getting (SSD brand - I didn't want to do fixed point/direct to roof with the crossbars) are about 45 inches at the front and 43 inches at the back. What length Wingbar should I get? Thanks for the video, it is incredibly helpful!

[@robbrike4619]

Well done, thanks a lot!

[@rackattack]

Hello. You're welcome, thank you.

[@filipalexandru3129]

quick question. I am about to buy this set of racks for a civic x sedan 2018 with sunroof. The Problem is, that the Thule sent me an email that for this type of car(with surnroof) the racks won;t fit....WHY? I ve seen a lot of cars with sunroofs and roof racks and have had a problem in years. Is that only as a safety thing or sth? because from what I saw, the sunroof opening/closing is not affected at all. Thank you very much for the response.

[@haranic]

Hi. My 2020 Nissan Kicks Sv has no roof rack rails. So I need one of those things in your video. And i prefer thule however if it has no product fits to my car , i don’t mind other company’s product. In this case, which type of product I should buy? I mean , the specific model number. Please let me know what to buy

[@annale1957]

What length are these bars???

[@konsul2006]

As a newbie who only wants to put a pair of skis on there, how do you do that? What makes the skies not just slide off? :)

[@rudigerbrightheart7304]

Great video, very helpful instructions! I have the Wingbar Evo 127 and I have a problem pushing the plastic pieces at the end of the bars. I have double checked if the side was correct. Now there is a little gap of 2-3 mm at the borders and this may be cumbersome with water infiltrating. Any helpful advice would be appreciated!

[@rackattack]

Hello. Check that the rubber on the top and bottom slots are not interfering with the end cap fully connecting. Thanks!

[@mitshumarner5870]

Very informative. With thanks. Question is the metal roof rail anchor padded to not damage the paint when it's torqued down?

[@YRDY]

Not padded, I assumed it had some sort of protection and ordered it.. Maybe gonna place some chair felts underneath. 😅

[@YRDY]

Never mind, there was already a similar question asked and answered. There is a P-Bax coating/cover over the bracket;)

[@clickitylynn1]

Thankyou so much

[@rackattack]

You are so welcome!

[@afrikaansgospel3739]

Way better than the Thule company video which has no commentary.

[@rackattack]

Hello. Thanks for the positive feedback!

[@IAMBCM]

Fits in 2018 Toyota Camry ??????

[@axedent6662]

What car make and model?

[@jessehernandez3727]

Is this the exact same process as the Toyota CHR?

[@nunogaisita1044]

That car don't have a hole to fix the bracket with a screw, to be more safest?

[@levkomed]

Hi, is the length between racks and from front to window same on all cars? I have Jetta 2017

[@jor_dilemas]

very useful video. Thanks!

[@rackattack]

Hello. Thanks for the encouraging feedback!

[@ajtelfer]

Many thanks - fantastic demonstration. Really helpful

[@cristiannistor1076]

Hi! I have a question before ordering this product. How will behave in time the attachement on the curve of the door. It is metal on metal. There will be scratched of the paint at the installation or afetrwards? Thank you!

[@cupydon27]

Hi Cristian! It might scratch the car paint. You must follow the Thule guidance exactly to avoid problems. For extra protection, you could install a paint protection film PPF like 3M Scotchgard or similar.

[@pinoybikers8834]

Will these fit on any door clamp car?

[@chuck12319655]

i love this thing

[@rackattack]

We're glad you like it!

[@georgemccarthy8781]

Really excellent informational video - well done & Thanks

[@Alexandros27]

🇧🇷 thanks you. 😉👏🏻👏🏻👏🏻

[@jaskiewicztomasz]

Great video and great instructions! Thanks!

[@surfthecure28]

I recently purchased these racks and am having a lot of issues with the rubber pad staying flush to the roof of my vehicle in addition to having the bars hang evenly on each side of the car... any advice?

[@Canon1014XLS]

Nice, thanks 🙂

[@rackattack]

You're welcome 😊

[@KV89-b3c]

Hey, is this the right direction of wingbar? I have the Thule sign on front :D

[@Cuebix]

Just checked and it is the right way around.

[@jabespangs]

Any tips/videos on how to replace fitkits? I wanted to use my old evo roof rack on my new car so I need to remove the old fit kit and put in the new one.

[@rackattack]

Hello. Yes, the base pads will peal off from around the perimeter of the foot base, to remove a door frame bracket, push up on the bracket into the foot, then push inward, then down, same for each foot. Thanks!

[@Will34TV]

Liked the video! Question is, can I put a snowrack right on this, or do I need another bar?

[@rackattack]

We offer the full selection of Thule snowsport carriers to fit the Thule roof racks: www.rackoutfitters.com/thule-ski-snowboard-racks-1/

[@mollymartian9969]

i wish i had watched this one before watching the Thule one. i pushed the feet in and now i can't tell which one is which. arg.

[@cheefussmith9380]

How much weigh can these things support? I keep seeing adds for those roof nest tents...doesn’t seem like these could hold that kind of weight

[@rackattack]

Weight capacity is vehicle specific, use the Thule fit guide to determine the max load and tent approval. Thule, Yakima, and Rhino-Rack all state that their clamp-on type roof racks are NOT approved for the rooftop tent category.

[@tomaszdushas5606]

great movire

[@petercho4939]

Great video! would the roof vehicle specific metal clamp mark up the factory paint from being on the car for a long period of time? If so, can you install a protective 3M layer on the contact point before mounting the foot clamps?

[@rackattack]

No need. The metal clips are completely covered in a protective P-Bax rubber. This provides grip and protection to the vehicle.

[@847MicRoss]

My rack has moved a little bit and it didnt harm the paint. A clear vinyl isn't a bad idea though.

[@juliussdelacruz447]

Thank you Rack Attack! Do you have any special tips if I'm installing on a Mustang Mach E Panoramic fixed glass roof?

[@rackattack]

Hello, after reviewing the manual for the vehicle, we see no special notes or instructions related to the panoramic roof installation.

[@juliussdelacruz447]

@@rackattack Thank you so much! I appreciate the info.

[@winstondes181]

i have a corolla hatchback, the "x/y scale" on the manual is universal, theres no indication for my car so i dont know at all the distance i need to have

[@rackattack]

Hello. According to Thule's fit guide the current fit kit for the TOYOTA Corolla Sport, 5-dr Hatchback, 19- is KIT145209, here's the manual which includes all the necessary measurements for the proper fit. www.rackattack.com/public/product-instructions/145209_521-5209-02.pdf Thanks!

[@karenbowser1429]

This video was extremely helpful but my issue is after installing, drove the car and it’s super loud from the wind so I’m thinking did we do something wrong or what could it be?

[@rackattack]

It's important to install the rubber on the underside of the bar from the foot to end cap, without this rubber you'll get wind noise. Hope this does the trick!

[@stevescottukss]

Thanks for this great vid. How does the bracket part that sits in the door frame not damaging the paintwork though please? I can't see rubber on the inside.

[@rackattack]

Hello. The metal door frame bracket is entirely coated in Pebax rubber for both grip and protection of the finish. Thanks!

[@stevescottukss]

@@rackattack Thanks so much. I shall have a go at fitting it this weekend :)

[@ericbrasel9779]

So I have this exact rack for my 2019 camry, when you place the feet on the bar is the front supposed to be a little wider than the back or both the same, mine showed 39.5 for the front and 37 for the back if I read it right.

[@rackattack]

Hello. The foot position on the bars is almost always different front to rear and usually spaced wider at the front. Thanks!

[@noahfickel7698]

How do you explain the rubber foot pads lifting free after tightening?

[@rackattack]

Hello. That would usually be caused by incorrect foot placement on the bars. The inner edges will lift if the feet are too far out. Thanks!

[@Rich_Juricich]

Great instructions! The printed instructions that came with the rack are really confusing.

[@marklugo3276]

does the moon roof still function or does the rack get in the way? i have a 2020 elantra gt nline with a panoramic moon roof but im not sure if roof racks could be installed.

[@rackattack]

The sunroof is not guaranteed to work with the roof rack. We have found that in most car the sun roof is able to be opened but we recommend slowly opening the sunroof on your first attempt to make sure the is no interference.

[@slimatmim]

So I was wondering. Is it ok to install small clean vinyl in the area where it clamps to the car to prevent from gouging the paint.

[@rackattack]

Hello. Generally, it is not necessary as the rubber is specifically engineered to be protective the the surface, however, 3M does manufacture a clear vinyl adhesive that could be used for added protection. We do not have a specific part number or source for this vinyl as it is not a method that is commonly used. Thanks!

[@ITSAMN88]

can I install a ikamper mini on this EVO series?

[@rackattack]

Hello. Not the EVO Clamp systems or any clamp type roof rack. Most EVO Flush Rail, Raised Rail and Track mounted roof racks with a minimum 165 pound load limit minimum 27.5 inch bar spread are approved. Thanks!

[@Thienhuong72]

Hi! Thank you for the info to install it.I did the same and easy to follow steps.And I have a question now.Please tell me how to remove the fit kit from the evo foot clamp.Because I would like to switch the cross bars to new car with different fit kits.Thank you.I appreciate it.

[@rackattack]

Hello. The door frame brackets can be removed by pushing upward, then rotating inward then pull down. The rubbers bases can be pealed off of the pivoting plastic bases. Thanks!

[@Thienhuong72]

@@rackattack thank you so much.Wow that s easy to remove.I appreciate it.

[@rackattack]

@@Thienhuong72 You're welcome!

[@kylehooper2981]

Why does the fit kit I got for my feet not fit the feet? The ones I have, have two 'spires' coming out that insert into the uprights. Maybe it is an older model? And the clips that attach to the car are very short. Is there a fit kit for my car that works with these? Am I looking at it wrong? Because it does not seem like it fits or works - at all.

[@rackattack]

Hello. The past foot packs are not interchangeable with the current fit kits and vice-versa. The EVO Clamp Fit Kit, must be use with the EVO Foot Pack. Please use our guide to see the parts that will work together on a vehicle: www.rackattack.com/wizard/

[@papillon5537]

Thanks for sharing, do you have recommendation for Golf GTI?

[@rackattack]

Do you have the 3 or 5 door version? Also, please let me know the year so I can get the most accurate fitment

[@ManoloDaza]

Great video, thanks! I see you've installed Thule EVO Clamp WingBar and also in a different video the Yakima BaseLine + JetStream. Once completed the installation, for the next times you want to install&remove the roof bars, which ones would you say is more comfortable & quick? Example, I want the roof box just for the trip, once in there, I'll take everything off and install it again on the return trip. How long would it take? Thanks in advance,

[@rackattack]

Hello. The EVO Clamp has fewer adjustment making install and removal faster. Expect about 2 minutes to remove the rack and 10 minutes to reinstall. Thanks!

[@ManoloDaza]

@@rackattack Thanks a lot!