RAM 1500 alfaobd problems and solution

Are you about to go to the dealer because you can't clear
Service trailer brake
Service air bag
Service electronic brake system
Service antilock brake system
and maybe more after using alfaobd? This video might help you.
RAM 1500 alfaobd troubleshooting, works on 2013 and up RAM trucks. Activate almost any factory option at home. See my other alfaobd how to videos for more info.
Contact for more info and how to purchase: / 4th-gen-ram-electronic...
CORE 4x4 use promo code “Hot Damn” for 5% off! : www.core4x4.com
Facebook group: / 130176127592586
4th Gen RAM electronics use promo code “Hot Damn” for aux panel only and get 5% off: / 4th-gen-ram-electronic...

[@rolandsalazar5911]

Great video man, thanks! I just changed my tire size and trire pressure threshold and afterwards I got a shit load of fault codes! Going to try yur solution now...I hope it works.

[@gphilpot1]

Great video to help others. AlphaOBD can be a very dangerous tool for a novice.

[@gunfreak565]

Still trying to figure out how to save everything to google drive. I’ve read it on Rams Forum and watched Big daddy’s house do it but I’m not very computer savvy so I can’t figure it out. HOT DAMN!! Between you and Adam at Bid Daddy’s House I’ve figured out most everything else though. Thanks for your videos man!

[@starmc26]

You probably shouldn't be attempting this kind of stuff.

[@ali-yk9jg]

hallo bro what obd2 adapter you are using , i see some are using elm327 with special chip

[@hemipower63]

Add some lights💡 to that spray Compadre!!! Also put a good alarm! 🤣 you have a caravan🇸🇬🇲🇰🇲🇳🇳🇬🇵🇸🇵🇷🇷🇺 coming thru your neighborhood soon. HOT DAMN🔥🔥🔥🧨

[@618b.k.g.5]

Nice. Thank you!

[@MrNiggaNick]

Just out of curiosity how did you fox this I can't find anything showing my stock configuration

[@TunedRAMS]

Hot dam is right alright

[@pelayo620]

Do you have a video or know how to write the vin in a new ECM with the alfaobd app..

[@HOTDAMN]

No sir

[@whistler9095]

Will alphaobd allow me to disable the air suspension system to replace with coilovers and have no service lights on?

[@HOTDAMN]

I was able to remove everything except for the initial warning. So only a warning on startup and then nothing.

[@cee5902]

I just bought the alfa obd. After watching your video I'm worried to use it. QUESTION: before I do use it, will all this in the system your in here be right from the start so that i can screen shot all the info of my truck and incase i do mess something up i have it all on photo to go back and change it back to the way it was?

[@HOTDAMN]

Yup you can use photos, screen shots as back up.

[@benderman55]

I have tried running the ALPHAOBD and not impressed, put fog lights on with high beams, tire size change, led headlight, after I made the changes, every idiot light in the entire unit was on and blinking, ended up taking it to the dealer and have it flashed. Just spoke with a rep at alpha obd and the lady told me that you only do changes one by one, after each one is done, you need to do a proxi alignment and it must be successful, if it is not you have to roll back the changes made. I had a big one ecu configuration mismatch. It wasn't even drive able. The transmission was hammering when putting it into gear. The rep said to reverse the change and put it back to where it was. Make sure you have your log recording on in case you forget or lose track. The second time I tried it, I changes fog lights with high beams, ran the proxi alignment had all the codes again, rolled it back and it was ok, I was worried I would have to tow the vehicle back to dodge and have it flashed. I Have since deleted the software. Its a big dog turd

[@changchung]

Is a way to save the settings before do something right?

[@HOTDAMN]

I think you can, I never tried it.

[@WeaponsMachinist]

How do I get the alfaobd like the one your using?

[@RF-fr7jl]

HRM Weapons Machinist AlfaOBD.com or on the google play store

[@josevera7525]

So before I made any changes and added a pulsar module I had saved a copy of all factory settings you could say. Is it possible to load that file up and reset any changes made? Instead of going 1 by 1? Also what does reset ECU do?

[@HOTDAMN]

I think you can do that I’m just not positive, alpha OBD has made a lot of updates lately.

[@wisper8089]

Where did u get the speedo needles and gauges faces from? Noticed u changed it to limited also nice.. I did the evic 7" upgrade but i like your needles and faces.. Brahdah Man, I gotta say u have one killah truck forealz!! ALOHA FROM THE 808 HI STATE🤙

[@bluerush3244]

I swapped a "limited" cluster in my 2016 power wagon, I found it on ebay from the cluster surgeon he also programs the miles and hours so its ready to go when you get it.

[@forrestmiller4055]

My check ID was 127 pages log, and it seemed to repeat a few times...is that normal?

[@HOTDAMN]

I honestly don’t know. Check the forums, great info.

[@jrwmi07]

Alfa should allow u to save factory settings??

[@RF-fr7jl]

Hondo This would be great but unfortunately it does not have that capability.

[@tattedup1189]

Man i for the life of me cannot get the backup light out message to delete and the hot damn parking light out message to delete even when i clear the codes soon as i turn lights back on kicks right on

[@HOTDAMN]

Did you check the forums?

[@tattedup1189]

@@HOTDAMN yea i tried the sockets in the tail lights and it solved it, hot damn

[@johnwilson1784]

#HotDamn

[@ls1powered240sx]

Can you print the list before you make changes?

[@RF-fr7jl]

Master Yoda The list is a bit extensive but you can create a google drive account and upload the settings to there. It’s a great idea to make changes slowly and only change what you are sure of. Alfa is a pretty powerful tool. www.ramforum.com/threads/alfaobd.123982/

[@ls1powered240sx]

@@RF-fr7jl thanks Chad

[@gphilpot1]

Has anyone tried to see if they can copy & paste the Car ID info from AlphaOBD? Would be awesome if it could be copied, pasted, and emailed to print out. Be a great resource to serve as a snapshot before and after changes.

[@HOTDAMN]

I haven’t tried

[@bretthuff8628]

I still can’t seem to get my Service Electronic brake system error message off. I was trying to delete a front park light message due to the led and now that is on. I feel like I’ve gone through everything! Any help would be appreciated.

[@HOTDAMN]

Did you check the forums? I’d have to be there to see.

[@johnnybabee9095]

You must have hit your Hot Damn Fart Button too hard!

[@acypooder1]

Qivnh