Range Rover Classic softdash Royal protection car - A-Frame pivot and MoT

Hello and welcome
At last it is ready for an MoT, but before then I need to fix the a-frame pivot, simply undo 4 bolts and remove from vehicle!!!
loads of fun
Enjoy
---------------------
Thumbs up and please subscribe for more
Contact me at ChurchHouseClassics at Gmail . com
There is no obligation but if you want to support the channel or just plain insist on buying me a pint www.paypal.me/ChurchHouseClas...
Many thanks
Richard

[@gbentley8176]

Hate those press jobs. Had good success over the years by drilling a small dimple into the stuck bold, applying a countersink and pressing with an old extension which has a ground end to fit. Helps to stop the dreaded slippage and keeps centre better. Keep up the good work thank you for posting.

[@DuncMcNutt]

Nice job Richard. Oh the joys of A frame bolts ball joints and bushes! I remember it well from many years ago.

[@laurenceturnbull2808]

Best range rover work shop. you see the real story behind repairing rebuilding a classic no bull

[@churchhouseclassics]

thank you for this, much appreciated

[@petershepherd6889]

Oh such joy,two videos in one weekend.many thanks as it diverted me from cutting the grass.😂 😂😂😂

[@churchhouseclassics]

I hope that is a euphemism 🤡 pleased you enjoyed the summing up video. I didn't quite have enough for a complete episode so thought just put it out for fun

[@stevanmurray-vi3dm]

Well done Richard that was definitely one of the harder jobs but very satisfying when its finally finished.

[@churchhouseclassics]

having a vision of the end game is a must else all hope could be lost

[@fredrikedebo4179]

Yes! Another viktory! Well done!

[@jonarnejorgensen1179]

Good job. :) I remember replacing the a-frame ball joint. That was a bit hard. Think i used 10 tons to press out the joint itself. Came off with a big bang. :D

[@gerhardbulla2999]

Grest job Richard!

[@churchhouseclassics]

thanks

[@andicog]

I've done 2 A frame ball joints over the last year, both have been the same, bolts seized in the joint body, I also had the same as you with one piece stuck in the arm, I drilled it out, also had to drill out 2" of the front Panhard Rod Bracket to chassis bolt after the head sheared off because it siezed in the bloody chassis. It's character building.... I've not been beaten yet. Keep up the struggle 👍

[@churchhouseclassics]

I might need a gas axe in my workshop but then I would be moving away from the "if I can do it with these basic tools then so can you" channel vision

[@jenshaga4256]

Great success! Cheers.

[@churchhouseclassics]

Thank you! Cheers!

[@Horsleyclassics]

Blue clouds ? Too much cider I reckon 😜

[@johnmoruzzi7236]

And April is May…. workshop solvents at play I reckon !

[@churchhouseclassics]

too much cider? is that even possible