Range Rover Evoque Front Brake Pad and Rotors / Disc Replacement / Installation [How To] DIY

Greetings boys and girls, in today's tutoriaI will show you how to change the brake pads and rotors(discs) for the Range Rover Evoque, but this method will also apply to Freelander versions or any other models with the same caliper type. The job is pretty straightforward and not hard at all, so you can do it yourself without the need to pay for this service.
Small Note: Be careful with the caliper bolts, you need to know what bolt type you have in order to torque it accordingly.
If you have any questions or want to say hi, please use the comments section below the video, I will assist you as fast as I can.
Also thank you for watching the video all the way, I really appreciate it(it takes a lot of time and effort to create these videos)
If you are new to the channel and enjoyed the video don't forget to click on the like and subscribe button for further videos like this(it's free)
If you want to be a supporter of the channel you can do so here, it's much appreciated:
- Donations: www.paypal.com/donate/?hosted...
- Paypal: www.paypal.me/SanKraN87
#mechanical #brakepads #rotors #rangeroverevoque
Please note that any tools or references in my videos are not promoted or sponsored by anybody, I do/use them at my own expense/purchase.

[@SanKraNsWorkshop]

Rev up your engine! its time for new brake pads and rotors, now you know what you have to do. By the way are you greasing your front sliding pins or not ?

[@SanKraNsWorkshop]

Later update, the guys from Autodoc answered to my question regarding the sliding pins: "The sliding pins on the front are not lubricated, as they function properly without lubrication. Sincerely, AUTODOC Team."; So basically there is no concrete reason not to help your sliding pins to slide even way more better with some ceramic paste! :D

[@tiffanypelham2413]

Great video! Just changed mine and watched you step for step.

[@SanKraNsWorkshop]

Thanks Tiffany, don't forget to bed your new brake pads and rotors after the replacement, did you also take your time and paint the calipers?

[@MrSnicol]

Very helpful, thanks for showing us this!!

[@martingriffiths9851]

Nice video, one suggestion, don’t replace your disks & pads with oem parts. In my experience JLR is inferior to specialists like Brembo (and are often cheaper).

[@SanKraNsWorkshop]

I did film a clip to make a video with the brake specs from Dyno with different brake pads mounted on Evoque, from different ranges on a budget, like ATE, FERODO, FEBI, TEXTAR, TRW, and OEM... but I didn't have the time to process the clips and launch it on YT, until now the OEM was the best in performance compared with those ones. Still, on the next worn-out, I will put BREMBO and I check the performance difference because I have too many requests from the shops to try those as well.

[@jeantaylor4500]

Brilliant video buddy

[@michelioyama5729]

Is that necessary to use scanner on this case? Any error message?

[@SanKraNsWorkshop]

For the front brake job is not necesary to have a Scan Tool, there is no electronic parking brake on the front side, only on the back side. Also i suggest to use the original land rover brake pads, I also did a comparison between ATE - BREMBO - FERODO - LR OEM and let me tell you from those brake pads nothing beates the OEM at the performance.(Video not released yet - in progress)