Toyota Cressida Manual Swap Part 2

[@StopItRyan]

I like that this series is the only mx83 trans swap without a lift. I am currently doing that and this is coming in very handy.

[@mantonio5666]

Hi bro, what kind of wiring did you do to get the electronic stuff working back, Im doing a swap on my cressida x70 but none of my stuff works 🤣🤣

[@RatchetFinesse]

There's the shift selector module on the auto trans. You can put the selector in neutral and zip tie it somewhere. Or you can splice the wires together to make the car think it's either in park or neutral and you'll be able to start your car. Reverse lights are just 2 wires that need to be connected to the reverse light sensor in the trans. We've never swapped a x7 so I can't give you technical details but if the above makes sense then you know what you're looking for off the trans harness.

[@mantonio5666]

@@RatchetFinesse Nice bro, just put together the cables in the trans wiring harness, (black and black white), might do the reverse light once its running thank you for advice

[@sergeimaidanik4119]

Hi bro! Can you explain how to bypass neutral switch position?

[@Finn_M132]

fr need an explanation of all the wiring, all the other information is easily found on forums but no one really mentions any of the wiring

[@Spongeknobb]

Did you ever figure it out??? Lmk I’m about to do this

[@Finn_M132]

@@Spongeknobb one of their other vids, it’s something along the lines of”toyota w58 manual swap mx83 something something something breakdown” has a link to a google drive with pictures and explanation in the description of the cid

[@Spongeknobb]

@@Finn_M132 thank you, your a god

[@Bearchette]

Hi I was going to swap my 1983 Cressida it’s a mx63 I was wondering where you find your parts and everything specific for your car

[@TheRedman49]

Yo my brotha does a Cressida have traction control like something hindering me from like breaking traction and initiating like a slide

[@RatchetFinesse]

Nope, did you weld the diff?

[@SalarJorjani]

Hell yeah 🤘 I’m gonna do manual swap eventually on the daily but funds are gone Just rebuilt the 7m 😂 only have bell housing so far

[@RatchetFinesse]

If you can find a donor or a junkyard car to pull it from that would be the easiest way to get most of the parts. We both changed our shifters so if you need a stock shifter let us know.

[@EPYes]

How's the w58 holding up? I would like to do the same to my Cressida.

[@RatchetFinesse]

So far so good in both cars 👍

[@davidphillips7473]

Hi where did u get the crossmember from ??

[@RatchetFinesse]

The trans crossmember is the stock auto one. Bolted to the trans it lined up with one of the other holes on the chassis. Just had to pop the cover off and it bolted right in.

[@tevincurry1521]

It’s going down

[@RatchetFinesse]

Get it!

[@tevincurry1521]

Ratchet Finesse I have to save some money