CBR 1000 Off Road Buggy Part 12

check out go power sports for all your go kart needs
bit.ly/2sC3WLT
ratherBwelding merchandise
bit.ly/2PF21Vf
Follow me on Instagram www.instagram....
help support me on Patreon - / ratherbwelding
Go power sports parts I used in this video:
1 1/4" Live Axle Bearing Kit
bit.ly/2YTsjol
Steering Wheel
bit.ly/37OZzkP
Challenger X steering gear
bit.ly/3fKK2Fo
Steering Knuckle
bit.ly/2BuBL9r
Brake Master Cylinder
bit.ly/3emLiOv
Single Master Cylinder
bit.ly/2AVlLO1
Brake Caliper
bit.ly/2BmJPJv
Hammerhead 250 Brake Caliper
bit.ly/2V5GRAa
Brake Hose 75"
bit.ly/2UZenYP
Rear Brake Disks
bit.ly/3hLf9lP
Brake Pedal Kit
bit.ly/2Cw61BH
Parking Brake lever
bit.ly/2Nes3La
Music by Epidemic Sound (www.epidemicsou...)

[@BLUEYENKO]

Use grease to hold those needle bearings in place.

[@mruble38]

i was gonna suggest either grease, a tiiiiiny spot of superglue and i mean tinyyy, or put a ring of paper around the bearing and then slide it out before fully seating the bearing when the needle bearings are about halfway out. (just some ideas)

[@handendaer]

as if he didnt knew........... u kidding me? they fishing for comments. google cash is king. do have to say i like this kid. more pro than like....70% calling themselves experts at what they do. not mean he'd do great at an heart transplant or anything but, yu know what i mean. i hope. even if some have hard time understanding how things are... but dont forget to vote and make a change LOOOL 😂😅🏳‍🌈🚀🙈🙊🙉

[@KiranDigavalli]

@@mruble38 Red tacky grease works well. Still a pain to reassemble uncaged roller bearings, but manageable.

[@Jack-dm8lj]

I enjoy watching you learn the hard way. I made all the same mistakes when I was in my 20s. If it doesn't kill you it only makes you smarter. Good work young man!

[@josteincarlsen2905]

So did I.. like the the piston rings on my moped🤣 or a bent rod because of shaving the head to far.

[@yodu45]

"In today's episode : chemicals and safety"

[@Ratkill9000]

Wear gloves when using solvents or even kerosene. Stuff is nasty and will effect your body over time.

[@lyndonwebber1389]

No how to make parts washer out of hydroponics tank

[@richardreinhard8864]

or proper lifting techniques.

[@deadslow201]

Sodium hydroxide Other names Caustic soda Lye Ascarite White caustic Sodium hydrate Sodium hydroxide is a highly caustic base and alkali that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. Used in strong detergents, drain cleaners, bleaches, etc. So yes, don't f with that shit.

[@lukesmith8547]

Yup i was wondering why you were bare hands right after dumping the solution in

[@jooppostma6684]

I always use grease to place the loose needle bearings. You just smear this on the axle or hub so the needles will stick in it.

[@jmac430]

Hahaha, I was cracking up at the end when you got antifreeze in your mouth! Thank you so very much for including that, that was freaking hilarious 🤣!! Lol, have a good one man. Cheers! - Jesse

[@martinhogan5970]

Totally kewl watching it get dark outside 🤣🤣!! Love your channel bro! Therapeutic watching you work. And I learned a new phrase: ‘not gonna Cobb-job this!!’

[@RadFabz]

I wonder if the metal shavings are from fixing a spark plug hole?

[@johns5734]

Good thinking, they don't look like piston rings.

[@BraxxJuventa]

ALWAYS read the manuals on everything!! 👍😁

[@mr.b1259]

1/4 way through cleaning put on gloves, 1/2 way through put on respirator, 🤣 love it. I take pictures and videos of everything before I take it apart too!

[@craigbowley6783]

I love how you don't skimp and don't things half assed. Like SO many other you tubers👍

[@loganb9265]

Have you thought about buying some land for a shop and more room for activities so Karen doesn’t yell at you again 😂

[@richardreinhard8864]

he would need a lot more subscribers or more contributors to his Patreon page.

[@takerkanefan108]

He's said in previous videos that he has already been looking for land to buy

[@refugeinc.159]

Na he decided to waste his money on a new truck instead.

[@FJ80Coop]

Pack the gears with grease.install bearings making sure to count them and get proper number per gear..install gear set...grease won't harm the gear oil nor bearings nor synchronizers nor bushings... You can usr a drill attachment to lap the valves and guides which makes the job easier and faster...simply cleaning the gunk out of that valve guide and stem will free it back up...new valve stem seals and a good lapping will have that old head back in usable shape... There's a good way to wind up getting eye surgery if a corrosive winds up in your eyes.. Careful over rushing works best every time.

[@danandyong6653]

Metal shavings... check spark plug hole threads for clues

[@1abc2abc5]

Lol. Never stop ending with outtakes. Your bloopers are hilarious. Good luck.

[@mikeakamiky7245]

Great video and I like the outtakes at the end 👍🏻 keep the awesome content coming

[@gregsweet6567]

Really liked the engine mount that tied into three different parts of the frame, looks really solid!!

[@ianellithorpe5918]

I absolutely love your bloopers

[@KIANkillsps]

Am I the only one in tears on the floor after he gets a mouthful of antifreeze 😂 I’ve been there before!

[@Water-fr1jv]

this build is so sick, been watching since the very beginning! can’t wait to see it ripping

[@saingoenaga7751]

Me encantaría trabajar con una persona como ested maravilloso trabajo... Saludos desde Colombia ✌️

[@michaelweatherly6077]

Been watching you for a good amount of time and I just want to say wonderful job keeping projects coming.. With the no longer good CBR 1000 motor, I think you should save all good parts out of it and use it to fix the good engine if you end up breaking something. You can never go wrong with extra parts, at least then you wouldn't have to spend so much money having to fix something

[@CRDavis-pj4zh]

Love the past few endings in your vids keep doing outtakes

[@faisal007af]

Thank you sooooooooooooooooooooooooooooooooooooooooo much 4 the wonderful videos you post... i luv watching them for hours..

[@BillBogan]

Dam those outtakes were brutal. Nice work, your build looks badass.

[@PHUSII]

Great progress, that buggy will rip!

[@NOONE-hp8bw]

Blast the bearings with the jet so they spin really fast, that cleans them up nicely, done it a few times myself

[@azertyytreza8947]

Just replace bearings. They’re usually not expensive and you don’t have to hit your own head if a re-used bearing starts making noise after you put things back together.

[@urock0124]

Heavy weight grease on the needles usually works delicately set them it.

[@88s10Durango]

I really feel you went all that way to have a good running engine Chris ,, you should have honed the cylinders and put new rings in it ,, cheap to do and gives you thebest posable compresion :)

[@Eeropolvasti]

Yep, yep !!

[@jerrellkull5347]

Dude! Are you freakin kidding me? READ AND OBEY LABELS!!!!!!! and wear PPE ALWAYS!!!!! Ya gotta be alive to make this sick build rip!

[@sykwookiee]

Chris, I see that you are one who goes full speed ahead...I used to teach shop class in order to get enough time and credits on my high school resume...we would spray WD-40 on the back of the "victims" knee and then wait for the reaction...

[@GoKartsorGoneFishin]

U need to get an electric leaf blower brother..I blow my shop out 3 times a day In 30 seconds..the simple things save u alot of time man..love your videos, wish we was neighbors

[@lizzard7473]

That hand is now very clean

[@caddiman9834]

Love how u add ur screw ups at the end.🤙🏼

[@jonathanperry3792]

Chain guard's are a must if you value your head or arms.

[@keithw372]

you can lap out small pits , and the valves can be okay and you can have them reground too.

[@mkhayacafe5570]

😂😂😂😂bro u killed me at the end knw u found out the hard way how it tast like😂😂😂😂😂😂😂

[@williampeterson6025]

It's coming together nice job

[@bikeliferider0377]

Love the vids don't ever stop you inspire me so much

[@valid_michael]

U prob won't see this but on Sat Nov 7th me my dad with the ttr230's and our friends with the polaris rzr and the honda quad helped u out of the woods bc ur wheel on the grave ninja snapped off and we pulled you with the quad

[@ratherBweldingChris]

Haha you found my channel. I can’t thank you guys enough for helping me yesterday

[@valid_michael]

@@ratherBweldingChris yea was actually fun to help and you didn't have to leave your grave ninja over night

[@abelcanahui3459]

Oh no! Spoiler alert! Lol glad there's always nice people to help.

[@tobinkupe5558]

Love the out takes 😂😂😂

[@oneeyedude20]

19:35 that's what she said!

[@wishbone20t]

You can use a heavy grease to hold the needle bearing in place for reassembly

[@kevinfrye1822]

Those needle bearings in the gearbox just use a shorter dummy counter shaft and put them in using grease to hold them in place then slide the dummy shaft in one layer at a time . When you install the original shaft in the gear box it will push the dummy shaft out leaving the needle bearings installed .

[@antonioflores9820]

I understand you... same problem with cleaner...

[@mikedavis6566]

Nice work. I like the music on this episode. John Wick of the fabbing community. Ewww, you let him do you on the first date...

[@cmac956]

on your needle bearings , use light grease in the hole , it will hold the bearings in place.

[@michaelbirchall2247]

Gloves and get yourself some goggles for sure!!!!

[@Theremoore]

He's got some really clean hands now, and i guess he woke up the next day with an annoying headache. Well... someone is gonna start reading all the warning labels on jugs and bottles from now on!

[@dave1135]

It's why it's always a Good idea to wear gloves

[@shannonrickman7620]

I really like this machine but Im going to say the chains are going to be the "weak link " .

[@libertyauto]

Oh man, and that is your stranger hand too.

[@oldshovelhead]

LOL! Our innocent Chris, (almost) never swears, no alcohol etc - but there he is at 1:02 dropping acid. Hoooo , at 17:37 when you FINALLY read the label, oh heck I'm still laughing. Sorry dude, I just couldn't pass this one up :) you know, I'm your big fan in CLE

[@ratherBweldingChris]

No alcohol? I don’t know if that’s true😆

[@oldshovelhead]

@@ratherBweldingChris ;)

[@JoelArseneaultYouTube]

You may not have any local bearings shops around you, but most towns have a transmission supply shop or something like that... They usually carry lots of bearings at really good prices. If that is not an option, there are online bearings stores that are a lot better than using ebay or amazon.

[@philstergoretoy1653]

Dope build, can’t wait until it hits the trails

[@awright9183]

Hey bud, cool clip as always... but seriously you'll be lucky if you don't end up with you hand very burnt. I had a similar contact with a high grade degreaser for only a few minutes on my hand and was burnt pretty bad. Hope you dont have the same effect as your time was alot longer. Keep up the awesome clips and to everyone watching, stay well. Cheers from Australia. 👍

[@TimZ007]

My most famous mistakes included pressurizing gear lube with the air hose to blow it it. FYI the Qt explodes in your face between 5 and 10 psi LOL. Also a combination of frayed battery cable and cheap charger which overcharged lawn mower battery boiling out and water leaving lot of hydrogen gas. upon starting batter exploded covering me in acid. Lucky facing other direction and no direct damage. Its about as loud as a 410 shotgun though. I think I still have ringing in that side.

[@yawningkitty457]

19:20-20:32 is just one long litany of 'Thats what she said' moments. Hilarious :)

[@kiesh.]

Hahaha Aaroncake eat your heart out 😁

[@vanhornjim]

Use grease to help keep the needle bearings in place.

[@richardhodgson2]

A lot better choice in music this time last video I had turn volume off 🤣🤣 anyway good video

[@strangealliancem.v.c1449]

Funny episode, always keep your mouth closed, and wear gloves and glasses..... LMAO 😂

[@jameslyons1978]

enjoyed the bloopers too :)

[@aserta]

Since you have a yard, might as well ditch that miniature parts cleaner and get one of the cheapo metal sink and make a small stand for it with a drain pump through the normal sink evac and a second hand bilge pump (cause those are supposed to be rated for oils, sea water, and other garbage) and voila, you have a heavy duty parts cleaner. As long as you run some spirits through the pump to make sure it doesn't have water innit during winter, it should last you years out in the elements.

[@kevinkev1530]

Omg, the ending!!!!!!!!!!

[@lewiscunliffe1051]

Lucky you diluted some of that cleaner Chris I’m sure it helped and yeah I think at the very least keeping a door open would help haha. Looking good and all the best 👍🏻

[@rwwells3634]

17:03 he says it’s the end of video me:then what’s he going to do for three minutes

[@bwxmoto]

Abuse himself with dangerous chemicals

[@richardreinhard8864]

the out takes are the best. its good to know that even really talented people mess up.

[@anndivine9989]

You need to make a dumb shaft that is the same length as your lay shaft, grease then pack your needle rollers and gently slip in your dummy shaft, 'note' this is only as long as your lay shaft so it will slide into the case, once inside insert your longer shaft so it pushes out the dummy shaft, job done.

[@Darth.Grogu.]

I watched a case on TV years ago where a woman poisoned her husband with antifreeze, and back then is wasn't easily detectable.

[@MullinPerformance]

Dude, get you a turkey deep fryer. Fill it full of purple cleaner and turn it on low...drop parts in and let them simmer. It will be the easiest cleaner you will ever use.

[@markheischman672]

That little parts washer is awesome! Is that home made?

[@russellprentice8121]

Use vaseline to hold bearing needles in place. It melts at low temp and won't hurt anything

[@brianelstro7801]

Everyone gave you the needle bearing "trick", and you can grind the valves as long as they're all straight and the guide areas are clean. So don't trash anything just yet!!

[@jackofalltrades3209]

Yeah, the chemicals eat the lipids in your hand(fat). I recommend putting neosporin on your hand and cover with a glove to help heal it.

[@Racing95mx]

It there a better place for that fuel tank, up there it will introduce a ton of roll, when tuning with indipendent suspensions

[@mikeeger7581]

Also after the engine is running, I think, you are supposed to go back and re torque the head bolts after you run it for awhile

[@harvey1166]

Everyone has times waiting for parts, your not the only one 🤟 and needle bearings can be held in with a hefty dose of grease 👍

[@apphead41]

Here in the netherlands if you orde something before 21:00 hours jou have it the next day home

[@gasperajdnik5627]

Keep Up The good work 👍👍👍👍

[@MrJameslewis530]

Wheelie Monster in Progress.👍🏼

[@cthulhu8977]

variable speed bench grinder with wire wheel is pure sex for removing light rust and crud.

[@GroovyDrifter]

Ouch, just saw a video from Mastermilo where they say how dangerous the cleaning solution is and then I see you cleaning the parts with bare hands and I go WHAT!!!! STOP!

[@DarkCornerGarage]

Product called Trans-gel to hold needles in place. Its a super sticky red grease.

[@rev007ful]

keep up the work m8 love the vids

[@oldhillbillybuckkowalski]

Use grease to hold the needle brgs in place.

[@Sc1Z]

Always a good day when I see you uploaded.

[@redmancheweryeeyee5873]

This build is great

[@Ilsabug1]

Grease is the proper way to hold those needles in. Something non detergent. Petroleum Jelly will work as well.

[@silentdeath9237]

On a four cylinder engine two pistons up two pistons down if I remember right pair the two up and the two down for the exhaust you can get a four cylinder to sound like a v8 they just rap out faster.

[@tracysharp5969]

you need pistons rings and wrist pins. the sleeves on the bottom of your pistons are shot.

[@kiesh.]

Interested to know how you could tell? From the scores in the wall?

[@tracysharp5969]

@@kiesh. rounded shape where marks on cylinder walls from piston rocking.

[@jeremiahjohnson8916]

I got injector cleaner in the corner of my eye and all over the side of my face in high school. Was cleaning injectors on an 01 kia rio with pressurized injector cleaner and one of the injectors wasn't sealed so when my buddy hooked up the airline and it had time to build enough pressure it shot the injector all the way to the other side of the shop and covered me in that stuff. My face burned for an hour or longer.

[@its_me_voltron6394]

Like the music

[@angelo.guglielmo]

Hi. Thanks for your videos, are very interesting. Lately i've seen that the subtitles are deactivated in the last videos that you've uploaded. You know why? I think that the subtitles of the videos are very usefull. Thanks Again.

[@mypasswordistommy]

That's a particulate mask filter, you need the carbon filters for vapor

[@xruninslick]

A good sticky grease is your friend working with needle bearings.

[@TrPrecisionMachining]

very good

[@LukeBrinkerhoff]

great, now you gotta have monthly safety meetings.

[@mikeeger7581]

Don’t forget your dowl pins if there are any?! Thanks 🙏

[@DYLANTRIES]

Pitting on the stem can make it break and end up halfway into the top of the piston

[@adamr9215]

All that new crap for parts cleaners is worse than just using old school kerosene. New diesel isn’t any good for it but kerosene still works great.

[@dbree9668]

tip use wheel bearing grease to hold the needle bearings in during assembly

[@Gu-stav-son]

what is your floor constructed from? Is there any concrete layer under the plywood? Or there is like shallow crawlspace you know... I m planning to build garage simillar to yours and I like your floor is seems to be smart durable solution.

[@lizzard7473]

Love it

[@THEdisgruntledmonk]

Word to the Wise -- If its strong enough to dissolve Grease and Oil, It will certainly dissolve You!