RC Glider SIMPLE LADY V3, Full Build From SCRATCH and MAIDEN. RC airplane 3D printed bungee hi start

  Рет қаралды 59,905

Marko Roolaid

Marko Roolaid

Күн бұрын

A wonderful RC glider is ready that is easy to build and very easy to fly. 3D printed fuselage and carbon-balsa wing. How to do it yourself, see the video...
Bambu Lab X1-Carbon Combo:
shareasale.com...
Bambu Filaments
shareasale.com...
Simple Lady V3 Drawings:
grabcad.com/li...
This video is sponsored by PCBWay.
If you are interested in electronics and technology, this is the place for you. Very easy and convenient to order PCB boards, CNC milling, 3D printing and much more for your projects
www.pcbway.com
ATTENTION
LOOK HERE
PCBWAY 9th Anniversary SUPER Special Offers.
LINK www.pcbway.com...
Carbon Fiber Reinforced High Temperature Nylon Filament
eu.store.bambu...
Carbon Fiber tubes
www.r-g.de/en/...
Robbe Modellsport FS 166 BB MG DIGITAL SERVO
www.lindinger....
Robbe Modellsport SWITCH HARNESS GRAUPNER WITH CHARGING WIRE 1PCS
www.lindinger....
ORACOVER IRON-ON FILM MAGENTA TRANSPARENT 3 METER # 73
www.lindinger....
PICHLER RECEIVER BATTERY 2700MAH 4.8V NIMH CUBE UNI PLUG TEAM CHAMPION
www.lindinger....
/ @markoroolaid
RC World of Model - Facebook Group
/ 453983092600613
Liituge kanaliga, et saada juurdepääs hüvedele:
/ @markoroolaid
@Marko Roolaid
Thank you for watching.
SUBSCRIBE
COMMENT
LIKE
ROOLAID
/ roolaid
grabcad.com/ma...
#rcairplane #rcglider #giantRC

Пікірлер
@iflymodels
@iflymodels 15 күн бұрын
This is brilliant Marko! I tried to make your DLG from a couple years ago but failed epically. I think I will try this one!! Thank you for your amazing work.
@TailSpinRCSpain
@TailSpinRCSpain Жыл бұрын
Another beautiful creation from a master craftsman !
@flytobi7834
@flytobi7834 Жыл бұрын
Looks really well, as always! Great flying!
@brucebadeau9906
@brucebadeau9906 Жыл бұрын
Your video was excellent, too ... maybe some links about how and why cliff soaring can build up these tremendous speeds ... I saw one a while back --- all very interesting. I am a graduate of the Lawrenceville School Class of 1965... I essentially introduced at that time model u-control airplanes, hand launched gliders and snow racers --- .020 and .049. There was latent interest and when I went out playing it started a land slide. A friend built me a single switch channel, radio control with a vacuum tube (HAHAH) with a rubber powered escapement in the plane --- rudder control only... It had to cycle through the right then left sequence. But the best fun was hand launched gliders. I was a good javelin thrower - still hold a school record for 10th grade ---3rd form --- so I could get some height. One Sunday I caught a Thermal and away the balsa glider went --- just 18" x 3"-inch wings, spruce body and plasticine balancing on the nose... About 2 minutes later and it was out of site and off the school's 600 acres of property... no return address... could not follow it. Earlier that year a friend took me to Lake Hurst NJ for the indoor nationals ... So interesting ... the gossamer planes with 60-minute flight times under 90-foot ceilings in the blimp hangars.... But I could only register 30 seconds --- and others for HL Gliders were getting 60 seconds --- reaching the 90 foot top... Something is really lost today when kids do not design, build and fly something --- there is lots of engineering to be learned from this experience -- now it is TikTok and seeing who does the stupidest things.
@mikesrcgarage
@mikesrcgarage Жыл бұрын
That build is beautiful and flies amazing! The endcap elevator/rudder control surface horns are genius! Very nice!
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
thank you so much
@wayneewing4072
@wayneewing4072 Жыл бұрын
You've outdone yourself again.
@quentincampbell5865
@quentincampbell5865 Жыл бұрын
Found this while looking at Grabcad. The "Lady" part caught my attention. My first ever RC plane was the Gentle Lady in the late '90's. It was already an old design then (all Balsa frame with some plywood, standard tail). The Lady had many alterations after that and the only similarity to this one is the wing layout and no ailerons. Glad to see she still lives on. Wish I had a 3D printer then when I was building gliders, hehe. (actually, flying got me into 3DP). Nice job, thanks for the memories!
@janatlmb2770
@janatlmb2770 Жыл бұрын
I love that rig that you made for setting the foils' profiles in the right place.
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Ok, thank you very much
@k.o.0
@k.o.0 Жыл бұрын
Another amazing creation! I am really enjoying all your latest videos that include flights. I was surprised that you opted for a removable dihedral, since you need to tape it up prior to every flight. I guess at some point you can simply decide to glue it. I love your mix of contemporary and modern building techniques. You are the #1 RC builder on KZbin!! Congratulations on yet another stunning build! You Rock!
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Thank you so much for this wonderful comment. This kind of praise always makes the mood very good:)
@goldenfish77
@goldenfish77 Жыл бұрын
Wow, very inspiring video! I like this simple glider (just V-tail). Beautiful wings! Bravo, you have done!
@робертПетров-с8д
@робертПетров-с8д 5 ай бұрын
Хвост полное фиаско X образное лучше
@Red6er
@Red6er Жыл бұрын
great build! good video as well.
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
thanks
@wearemany73
@wearemany73 Жыл бұрын
I like the printed caps on the V-tail, very neat. 👍 great little aircraft.😊
@flyingouty
@flyingouty Жыл бұрын
It's beautiful mate, very nice build, awesome bungee and very nice flying :)
@wernerpfeifer
@wernerpfeifer Жыл бұрын
👍👍👍 Grandios! CNC, es muss ein Traum sein, heutzutage Modellbauer zu sein .
@робертПетров-с8д
@робертПетров-с8д 5 ай бұрын
Все намного проще делается без станков.
@sumedhmadhukar
@sumedhmadhukar Жыл бұрын
Simple Genius. Love And Respect. From India
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Thank you👍👍👍
@Unknown15916
@Unknown15916 Жыл бұрын
You live in a nice area to fly. Much better than urban areas !
@Unknown15916
@Unknown15916 Жыл бұрын
Congrads on your PCBWay sponsorship !
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Thank you
@Unknown15916
@Unknown15916 Жыл бұрын
Nice to see Roolaid 2.0 likes Dad's hobby too !
@робертПетров-с8д
@робертПетров-с8д 5 ай бұрын
​@@MarkoRoolaidполная фиаско братан. Планер не так прост как кажется 1 размах должен быть больше 3-х метров. 2 специальная куртка крыла позволяет стоять в потоке. Я уже 4 года не делаю планера. В ангаре 2 карбоновых планера supra и xplorer3 Вот это авиамодели, а не игрушки.
@christjanehusacek4911
@christjanehusacek4911 3 ай бұрын
Boah, ich kann ja gar nicht mehr aufhören dir zuzuschauen. Könnte ich die Bauteile von dir bekommen?
@brucebadeau9906
@brucebadeau9906 Жыл бұрын
BEAUTIFUL WORKMANSHIP
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Thank you so much
@charlesrodriguez8310
@charlesrodriguez8310 11 ай бұрын
Très belle réalisation, magnifique atelier, bravo
@MarkoRoolaid
@MarkoRoolaid 10 ай бұрын
thank you
@forester1
@forester1 Жыл бұрын
Amazing glider seen ever.
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
thank you
@робертПетров-с8д
@робертПетров-с8д 5 ай бұрын
​@@MarkoRoolaidпередняя кромка не обшита Флаттер обеспечен
@MegaSuperJaBaTo
@MegaSuperJaBaTo Жыл бұрын
Just beautiful (but the backgroundmusic is killing me 😁 )
@LarryParamedic1
@LarryParamedic1 Жыл бұрын
Great vid, Thank You for sharing..
@a330turbinex7
@a330turbinex7 Жыл бұрын
This is awesome Marko! Superb!!!
@johnw5154
@johnw5154 Жыл бұрын
Impressive. Looks like a great flyer
@CR5rc
@CR5rc 7 ай бұрын
Very nice, thanks for sharing.
@thatonebeone
@thatonebeone 10 ай бұрын
i miss flying rc.... this looks very fun and peaceful compare to 3d heli looks fun to make also
@MarkoRoolaid
@MarkoRoolaid 10 ай бұрын
👍👍👍
@darerchobbyreviews
@darerchobbyreviews Жыл бұрын
Awesome job Marko!😎👊
@petrokemikal
@petrokemikal Жыл бұрын
Awesome creation Man !! Your a genius..
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Thank you very much :);):)
@valesultubo8183
@valesultubo8183 Жыл бұрын
Wow! It’s so good!
@AndyLazaris
@AndyLazaris 4 ай бұрын
Brilliant and beautiful
@soosmate
@soosmate Жыл бұрын
Great stuff! Reminds me of the Introduction F5J, but smaller. Looks fantastic!
@topgun931
@topgun931 Жыл бұрын
Great job, amazing plane !
@olisandy0
@olisandy0 Жыл бұрын
Very nice. As usual 👍
@hosmanenriquemeloc.2250
@hosmanenriquemeloc.2250 Жыл бұрын
espectacular, great Job!!
@lucaminarelli3564
@lucaminarelli3564 Жыл бұрын
You’re the best! Thanks for this great content ❤
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
thank you so much
@Sandokans
@Sandokans Жыл бұрын
Great work Marko
@Демократът
@Демократът 7 ай бұрын
Beautiful!
@MarkoRoolaid
@MarkoRoolaid 7 ай бұрын
thanks
@DADDEL1864
@DADDEL1864 10 ай бұрын
Incredible. Not sure if you’d sell some of your builds. Anyone would be lucky to own one of your creations. Absolutely stunning build quality. Up there with the best of them and I’d say you’re number one. Sorry Ramy!
@MarkoRoolaid
@MarkoRoolaid 10 ай бұрын
OMG ;):):) Thank you so much
@natevanbelois4563
@natevanbelois4563 Жыл бұрын
So cool. I love your videos and creations. Id love to buy this when you decide it’s ready for a new owner.
@vpx4991
@vpx4991 Жыл бұрын
What a legend 🫡🙌❤
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
🫣🫣🫣🫣
@thrashinggamer
@thrashinggamer 8 ай бұрын
pure craftsmanship
@MarkoRoolaid
@MarkoRoolaid 8 ай бұрын
Thank you so much
@fonwoolridge
@fonwoolridge Жыл бұрын
Really nice work! Bravo!
@ac808
@ac808 Жыл бұрын
Great work as always Marko
@ioannisbatas1614
@ioannisbatas1614 Жыл бұрын
Superb !!!
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
thanks
@mikenowland2739
@mikenowland2739 Жыл бұрын
Bravo Marko 👏👍
@calmarcalmar
@calmarcalmar 4 ай бұрын
very nice
@MarkoRoolaid
@MarkoRoolaid 4 ай бұрын
Thank you
@vitorpaixaofernandes1328
@vitorpaixaofernandes1328 Жыл бұрын
Amazing!
@jbcl350
@jbcl350 2 ай бұрын
So, I am making a mashup using wings and tail from the Simple Lady and fuselage from the Electric DLG(printed 25% larger) My first laser cutter project. The wings with the CF rods are an easy build, genius really. Just waiting on the 16mm CF main spar. Fuselage with motor is all done. V tail with servos is done and configured. Can't wait to fly it!
@MarkoRoolaid
@MarkoRoolaid 2 ай бұрын
Hi, wow, that's great to hear. Be sure to share a video or pictures, it would be great to see. Anyway, it's wonderful that my projects have really touched someone and they have tried to imitate them
@ColinWatters
@ColinWatters 11 ай бұрын
Take care using superglue. I used it a lot and became allergic to it. If I use it now I get bad hay-fever like symptoms for several days. Use a desk fan to blow the fumes sideways.
@MarkoRoolaid
@MarkoRoolaid 11 ай бұрын
ok, thanks
@ChancesAU
@ChancesAU Жыл бұрын
Wow very nice ! Wing is stronger than I thought! :D
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
The wing is really strong. Carbon fiber- just amazing
@thercbarn5001
@thercbarn5001 4 ай бұрын
Beautiful glider! Can you tell me what the degrees are on your v trail? Thanks Mike
@David-hm9ic
@David-hm9ic Жыл бұрын
What beautiful execution of your plan! At 1:35 what kind of plane are you using?
@jorgericardoferreira3029
@jorgericardoferreira3029 6 ай бұрын
asi vale la pena volar planeadores , que calidad .
@MarkoRoolaid
@MarkoRoolaid 6 ай бұрын
Muchas gracias por este comentario. Saludos desde estonia
@jorgericardoferreira3029
@jorgericardoferreira3029 5 ай бұрын
@@MarkoRoolaid no hay por que , soy aeromodelista de bajos recursos y no llego a esas maquinas , pero las veo volar y me quedo extasiado , pero asi mismo e llegadoa construir buenos motoveleros que me llevaron al tercer puesto del nacional de mi pais , te envio mis mas sinceras felicitaciones desde Argentina un hombre de 78 años aeromodelista desde los 6 años , abrazo.
@робертПетров-с8д
@робертПетров-с8д 5 ай бұрын
Купи супру или Эксплорер размахом 3,4-3,8 метра и летай. Это не планер а глупая игрушка
@jpebeflying781
@jpebeflying781 Жыл бұрын
Espetáculo! 👏🏻👏🏻👏🏻
@erich3507
@erich3507 11 ай бұрын
Nice job! Do you share your stl? The V tail adaptator is very smart
@irvingcuevas6689
@irvingcuevas6689 10 күн бұрын
Hola Marko, de verdad que tus videos me encantan, actualmente estoy estudiando Ing. aeronáutica y tengo un proyecto de un planeador, en América no puedo encontrar el tubo de fibra de carbón que usas al menos todo es recto, tendrás el numero de parte para mandarlo a pedir a Europa? Saludos.
@Bear049
@Bear049 11 ай бұрын
Marko I’m 65 years old turning 66 in a few days would you build one for me for my birthday. I don’t have laser cutter or a 3d printer or maybe you can just make the parts and I could assemble it. I started building RC planes in 1978 . Thank you. I had a house of balsa two-t that was destroyed by an inexperienced pilot. You do great work thank you for sharing
@johanb8113
@johanb8113 Жыл бұрын
Hi Marko, nice design, congratulations. I ask why you used the CF 18 x 8? Is it possible to modify it to a single standard size? In this part of the world those types of tubes are not found.
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
You can still replace it, but you have to make sure it's not too heavy. Otherwise, the CG will not be in place
@johanb8113
@johanb8113 Жыл бұрын
Is it possible that you can provide me with the editable file to redesign the thickness of the carbon tube of the fuselage? I have thought about putting a 10 or 12 mm tube
@my_dear_friend_
@my_dear_friend_ 9 ай бұрын
Very nice build! What diameter is the carbon tube for the fuselage please? Inner diameter too, if you know it. Thanks!
@MarkoRoolaid
@MarkoRoolaid 9 ай бұрын
hi, Carbon fibre tube -TAPERED- 3k-PW (18.3 x 8 x 0.3) x 1100 mm link here www.r-g.de/en/art/77100503
@fabrizioarobbio4357
@fabrizioarobbio4357 Жыл бұрын
Great job !!! Could you explain how the wing is attached to the fuselage? Do you use screws directly screwed into the pla fuselage without a threaded insert or nut? Thank you !!
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Hi, bolts and impact nuts, look here kzbin.info/www/bejne/aYqaiZ-KZb6Sm5Isi=NO0dOcqjBRISwONu&t=307
@Donuts_random_stuff
@Donuts_random_stuff Жыл бұрын
Few questions Is it easy to control Does it feel different to a more conventional rc plane And that’s a it something that a beginner could fly
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
This aircraft is extremely easy to fly and control. It practically flies by itself and is perfect for beginners.
@Donuts_random_stuff
@Donuts_random_stuff Жыл бұрын
@@MarkoRoolaid cool, do you sell these and if yes: do you sell the parts to put together or do I have to print it myself???
@AndreDoerfer
@AndreDoerfer Жыл бұрын
Great creation! I’ve been interested in the CNCs. Can you share what CNC machine are you using for your builds?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
hi, All my CNC machines were bought here www.stepmores.com/
@s_cycle1921
@s_cycle1921 Жыл бұрын
Bloody marvellous. Again! Where do you find the time? Nice use of the Bambu X1C. It did not quite change my life, but its as close as I have to a star trek replicator - excellent machine.
@antoalberi
@antoalberi 4 ай бұрын
👍
@franekmalinski
@franekmalinski 6 ай бұрын
Hi is possible to throw this glider from turnover holding glider for wing ?
@MarkoRoolaid
@MarkoRoolaid 6 ай бұрын
I understand that you mean a DLG-like launch. The answer is no
@FreeFly031
@FreeFly031 Жыл бұрын
Hello Marko! is it possible that you share some details about the print settings for the fuselage parts ? (vase mode for nose ? , and for the other parts, infill percentage, wall numbers etc ? ) Great thanks. have a good day, and congrats for your job !
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
The nose cone is made with Vase mode, the rest normally. Fuselage 2 layers and 3% infill. I'm going to try and experiment myself, many details straight into the trash :) But as usual, as strong as possible and as light as possible
@FreeFly031
@FreeFly031 Жыл бұрын
@@MarkoRoolaid thanks for your feedback !!
@yuh-321
@yuh-321 Жыл бұрын
Без элеронов такой размах, это жесть
@yodaiam1000
@yodaiam1000 Жыл бұрын
Really nice. Beautiful looking plane. Just out of curiosity, do you get any adverse roll with rudder input? The V-tails wants to roll the plane in the opposite direction of the turn but it is easily compensated for with ailerons but you don't have ailerons. The wings might be just so big they just resist the roll tendency?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
If there are no ailerons, the wing tips must be up, which is how automatic stabilization occurs. As in free-flight aircraft
@ВикторПрокопюк-ъ1н
@ВикторПрокопюк-ъ1н Жыл бұрын
Очередной шедевр, поздравляю Марко! За воздух держится как Орёл! Марко,подскажи какой вес и угол между стабилизаторами.😊
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Привет. Спасибо. Стабилизаторы (2шт) весом 30г. Угол V-образного оперения 110 градусов
@ВикторПрокопюк-ъ1н
@ВикторПрокопюк-ъ1н Жыл бұрын
@@MarkoRoolaid А общий вес планера?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Весь планер весил 632 г.
@ВикторПрокопюк-ъ1н
@ВикторПрокопюк-ъ1н Жыл бұрын
@@MarkoRoolaid Спасибо!
@romaincnc27
@romaincnc27 Жыл бұрын
Hi I would like to have your opinion I would like to reinforce lwpla but without weighing it too much because the lwpla and really not solid what do you think of covering with Epoxy resin then sanding then painting? Thank you for your opinion ;)
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Hi, This is a very good idea. I would do exactly the same
@AKlion_ru
@AKlion_ru 8 ай бұрын
Tell me which camera worked in the air from the glider wing
@MarkoRoolaid
@MarkoRoolaid 8 ай бұрын
Hi, DJI Action 2
@iansheppard6337
@iansheppard6337 Жыл бұрын
Thanks for last rely neat, unfortunately didn't get the 'svg' files??
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
Hello, thank you. I have not shared the SVG files. I only have STL and DXF files
@duoviss
@duoviss Жыл бұрын
what is the name of the height sensor that shows how high the glider was?
@iansheppard6337
@iansheppard6337 Жыл бұрын
Tried to download files for this cool glider but couldn't get past the Traffic light, steps, security part!!??? Can you help?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
hi, try this link www.thingiverse.com/thing:6116359/files
@Sandokans
@Sandokans 10 ай бұрын
Marko. Can you provide pdf files for the glider? I want to build the old fashion way. Thanks
@MarkoRoolaid
@MarkoRoolaid 10 ай бұрын
I am not going to make a PDF version separately. But you can definitely find a program that opens dxf and then you can also convert it to pdf format.
@eduardoabrildefontcuberta5464
@eduardoabrildefontcuberta5464 3 ай бұрын
hello, where Can i buy the carbon fiber tube for the boom? it ios a diminishing diameter tube and there is no information . thanks
@irvingcuevas6689
@irvingcuevas6689 11 күн бұрын
I need the same information ????
@thomasshelley4617
@thomasshelley4617 Жыл бұрын
That's a thing of beauty! What kind of winch/bungee do you use?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
My bungee hi start system is already 20 years old. It was probably produced by the ROBBE company. But the rubber has a diameter of 5mm and a length of 30m and I use fishing line 0.6mm 140kg, length 120m
@mjfw10
@mjfw10 Жыл бұрын
Do you sell the laser cut balsa parts? I'm not ready to invest in a $1000+ system and I can not find anyone locally who cuts parts.
@valesultubo8183
@valesultubo8183 Жыл бұрын
Forza Ferrari !
@guidow9616
@guidow9616 Жыл бұрын
It helps to have a 3D printer and a laser cutter right? Nice job but little to do with real building
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
These machines still help. But all models can also be made without CNC machines:) I know because I have been making them this way for 20 years
@ЮрийВоробьев-с3н
@ЮрийВоробьев-с3н Жыл бұрын
Track name?
@DavidNutt-r9e
@DavidNutt-r9e 4 ай бұрын
Richard Jarel's v-tail is similar but a two piece. I've made mold's of his Impulse glider and made them when I needed them. Your's would be an up-grade to what I've done.
@MohamedMohamed-so7gl
@MohamedMohamed-so7gl Жыл бұрын
Make it powered it's more fun.
@luckycatch365
@luckycatch365 Жыл бұрын
No esc?
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
No 👍👍👍
@wincydelavega653
@wincydelavega653 Жыл бұрын
I can't see the motor please explain it to me where is it
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
A glider does not need an motor:)
@daviddavids2884
@daviddavids2884 Жыл бұрын
17:05 WRONG !!!!!! in a hi-start, the ratio of rubber to line should be about 1 to 20 !!!!
@MarkoRoolaid
@MarkoRoolaid Жыл бұрын
I have never heard anything about this ratio. Could you please explain why 1:20 is correct?
@ВеселинХайдутов-м5з
@ВеселинХайдутов-м5з Жыл бұрын
🥇🥇🥇🥇🥇🥇🥇
@ozjohnno
@ozjohnno 7 ай бұрын
whats the wing span????
@MarkoRoolaid
@MarkoRoolaid 7 ай бұрын
@@ozjohnno Hi, 2000mm
Как Ходили родители в ШКОЛУ!
0:49
Family Box
Рет қаралды 2,3 МЛН
UFC 287 : Перейра VS Адесанья 2
6:02
Setanta Sports UFC
Рет қаралды 486 М.
«Жат бауыр» телехикаясы І 30 - бөлім | Соңғы бөлім
52:59
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 340 М.
HUMAN POWERED ACROBATIC MODEL?!! DLG
10:14
Martin Pickering
Рет қаралды 1,7 МЛН
Medina ARF 2 Meter RC F3-RES Glider Build Log
18:10
ArmSoar
Рет қаралды 34 М.
Building and flying the Riser 100 glider | Classic Aeromodelling
22:07
Igneous - 3D Printed Powered Glider - Build and Fly
10:52
SoarKraft
Рет қаралды 11 М.
Maverick F5K Electric Glider - Time Lapse Build
1:26:46
Bavarian RC
Рет қаралды 30 М.
"Carbon Bug" Build Log - All Carbon, 3D Printed DLG
9:52
How to Build RC 3D Printed ASK14 Glider - Planeprint
25:48
Troy McMillan
Рет қаралды 362 М.
Как Ходили родители в ШКОЛУ!
0:49
Family Box
Рет қаралды 2,3 МЛН