EDF Glider SUN DANCER Full Build From SCRATCH and Maiden Flight. 3D printed carbon RC airplane, DIY

[@planet43]

Great looking model, but that sound…… nah couldn’t live with that 😂

[@claudiodelpaggio9157]

Asombroso Awesome !!!!!!!! IMPECABLE!!!!!!! Congratulations!!!!!!!!

[@jackflash6377]

Little education on using "super glue". 1. Accelerator weakens the joint. Ever look at a joint that's been accelerated? It's full of void spots. I suggest not using it. Patience is the key. 2. Use the proper grade of super glue for the job. There are three types. Thin, medium and thick. Thin is for tight joints as it will wick deep into the joint. Medium is for loose joints as it will fill minor gaps. Thick is for open faces, fillets and mixing with micro balloons to fill cracks. I should do a video on how to properly use "super glue".

[@markoroolaid]

Thank you

[@Graybear78]

What a fantastic shop! Looks like the little plane flies great. Great job.

[@westoncraig]

i've not flown for a few years, watching this build was just a pleasure... lovely model

[@SomeGuyInSandy]

Nice model! I especially like that you made it attainable to those of us that aren't set up to do carbon fiber work. Thanks!

[@growbro365]

such a nice build but that would be so much better with a standard folding propeller

[@CodeWorkscz]

The amount of planes, that are coming out from your workshop is incredible ✈👍

[@s_cycle1921]

yes its almost like a new plane every week. marvellous productivity. I really enjoy all these production methods.

[@phmiii]

Thank you, I will remember the wonderful way that you used a Planer.

[@TailSpinRCSpain]

I love watching a real craftsman working !

[@Mike-pb5bj]

Beautiful ! Really like the color black and green mamba ! Perfect match ! Well done my friend ! 💙 👍

[@markoroolaid]

thanks

[@aleksandarmilinovic]

​@@markoroolaidbrate dolazim iz srbije i zanima me ovaj avion za koliko bih para napravio meni takav

[@thenerdoligist1292]

Excellent design, craftsmanship and performance. I’m jelly of your tools. Thanks for the video!

[@dudeman_1970]

It would have been nice to see you actually glide it around I was wondering how good it glides.

[@VadimBryksin]

Wow how did you configured V-tale to work in-sync with ailerons? and also why dont you use some ELRS EPW5 ? it would be much smaller and lighter receiver

[@mac16a]

Looks nice, but what is it for?

[@fifdesign89]

super! thx for the showcase

[@thematrix4305]

The assembly is very interesting, but the craving is very small. And I also want such a FUTABA

[@mmadson289]

Wow that was great vid. Thank you

[@forestfishburne7900]

There are hobbyists, and then there are artists.

[@bugsy742]

Oh my GOD! She’s bloody beautiful mate! 😃😎🤝

[@markoroolaid]

thank you so much

[@moletrap2640]

Work of art.

[@my_dear_friend_]

Is this a tapered(!) carbon fuselage tube? Like a carbon XC ski pole?

[@markoroolaid]

Tapered yees

[@abhijeetdhulekar9660]

I am really excited to know. how did you print that stickers? kindly your special video on it would be appreciate....

[@Pancho_Otto]

Amazing plane, where I can find the carbon tapered tube, if possible the links. Thanks for your amazing designs, from Argentina

[@NoIZyBoI2404]

nice model but which parameters do u use for the fuselage?

[@markoroolaid]

Bambu lab CF paht filament, 1 wall, 5% infill, 3 bottom layers

[@leewmlee]

You have a well stocked work shop!!! Beautiful model too 👍

[@markoroolaid]

thank you

[@josemarambiorojas5974]

Hola .me gustaria acer la parte en 3 d de fucelage..pero no encuentro .para hacerlo en maquina 3d. De chile felicitaciones muy lindo trabajo

[@swyntopia]

The data say it´s 4 times as heavy as it´s thrust. I´m surprised, today it seemes underpowered. Does it ?

[@Graybear78]

Could you advise what the angle of thrust is on your motor? I have been unable to find that information. Thank you. Again, great job!

[@markoroolaid]

the motor angle is the same as the wing.

[@zillafunfun1576]

Beautiful work as always!

[@ignasanchezl]

Put a QX-Motor 30mm edf 3s or 4s (different models) and you will probably get more thrust for less current consumption. The old style rebranded AEO-RC ones are not very efficient. You can also try the new style AEO-RC 40mm or XFLY-MODEL 40mm. The design is awesome, it just would be amazing with more power.

[@markoroolaid]

To be honest, I was disappointed with my own edf motor, I believed it could fly faster. Thank you for the suggestion. Of course, if I put a bigger engine and battery, I have to change the design a bit

[@ignasanchezl]

Thanks for replying. This is a very inspiring build.

[@ignasanchezl]

If you're considering going even larger with the EDF, I have a few 50 or even 70mm high thrust suggestions, but most EDFs on 70+size will provide plenty of power. Most designs go for a larger diameter possible because larger with less is often more efficient and cheaper, yet well balanced high thrust small EDFs seem to be disappearing from the market.

[@ДенисКонторкин-д6к]

Hi. Tell me what program you use for designing. Rhino or fusion? Your work pleases the eyes!

[@markoroolaid]

I use solid edge

[@ВикторПрокопюк-ъ1н]

У тебя Марко что ни модель,то шедевр! Не понял Марко, как ты задал профиль на крыльях не пребегая к контр шаблонам ?!

[@kasatka60]

А регулятор обдувается?

[@miszterMhun]

Amazingly professional work, congratulation & respect!

[@Taxicabs13]

Hi there Marko, What a great build. Thank you for sharing. Am I missing something or is the internal nose structure file missing from the GrabCad link? Kind Regards, Andrew

[@markoroolaid]

hi, now ok, i had forgotten

[@Taxicabs13]

@@markoroolaid You are a superstar. Love all your work. Thank you.

[@RCPlanesAndTravels]

Wow wow wow!!!

[@martinshaw3476]

bloody Amazing very skilled man thank you

[@markoroolaid]

thanks

[@DamienHirlimann]

Hello, The Model is really great. Were can I find the balsa part plans ?

[@markoroolaid]

Hi, look EDF GLIDER 2D.dxf file

[@DamienHirlimann]

@@markoroolaid thank you. Sorry Should have checked that file

[@wearemany73]

Very cool 😊❤

[@nico98377]

Hello Marco, I came across your channel and I'm really impressed with what you do, well done 🙂 However, I have a few questions about the build of this motorglider. What nozzle size do you use for printing? What is the temperature of the tray, of the nozzle? What is the print speed? Concerning the carbon tube for the body of the motorglider, on which site did you buy it? Thank you so much Best regards

[@brayanmoya7947]

amigo una pregunta, que clase de madera utilizas y de que grosor?

[@markoroolaid]

Ver dibujo DXF grabcad.com/marko.roolaid-1/models

[@ioannisbatas1614]

Superb !!!

[@abates3747]

very, very impressive.

[@TaintedBlood30]

Loudest glider I've ever seen. 🤣

[@Farming-Technology]

Beautiful aircraft. pls balance that edf tho.

[@pablofpv]

Beautiful build, what are you using for the hinges

[@markoroolaid]

Hi, link here www.lindinger.at/en/AIRPLANES/AIRCRAFT-ACCESSORIES/Hinges/DUBRO-Micro-E-Z-Hinges-Scharniere-15-Stueck-1-28x-7-14mm-0-18g-Stk./9787315 But if you can find smaller ones, I recommend them

[@pablofpv]

@@markoroolaid Thanks for the reply :)

[@ronniecochran8366]

I'm about to start this one as soon as I finish your F-16. Can you give me the carbon rod dimensions. Thanks Marko

[@markoroolaid]

Wow, super nice. Carbon fibre tube -TAPERED- 3k-PW (18.3 x 8 x 0.3) x 1100 mm www.r-g.de/en/art/77100503

[@ronniecochran8366]

@@markoroolaid I'll send you some pics. Thanks again Marko

[@markoroolaid]

@@ronniecochran8366 Join my FB group RC WORLD OF MODEL. It's good to share pictures there

[@ronniecochran8366]

@@markoroolaid I sent you a picture of the edf pod for my glider on your Instagram

[@solocupp6120]

What kind of hinges are you using?

[@markoroolaid]

Hi, link here www.lindinger.at/en/AIRPLANES/AIRCRAFT-ACCESSORIES/Hinges/DUBRO-Micro-E-Z-Hinges-Scharniere-15-Stueck-1-28x-7-14mm-0-18g-Stk./9787315 But if you can find smaller ones, I recommend them

[@scable-eq7bp]

Should offer this as a RTF....

[@danielhelsby1221]

How much to make one

[@stephendupuis6062]

Very cool!

[@markoroolaid]

thank you

[@Leto_.]

Отличный самолёт Бро

[@markoroolaid]

большое спасибо

[@YouTubSergey]

👍

[@myvideointube]

GOOD

[@florivaldopereirajunior5389]

parabéns...belo projeto...lindo voo!!!!!

[@CESARBREMERPINHEIRO]

What material do you use to build the V tail base? Thank you.

[@markoroolaid]

hi, Bambu Lab nylon carbon filament

[@CESARBREMERPINHEIRO]

​@@markoroolaid Thank You.

[@MEOW-sh9qz]

How long flight time?

[@markoroolaid]

5-6 min

[@piotrhelios1518]

Any chance you could make a version with a propeller and without a motor?

[@markoroolaid]

No :)

[@keepyourairspeedup]

This looks like so much fun, you are a rockstar!!

[@Skilpadjie1]

Is it just me or does that plane sound like a Mosquito when you try and sleep.

[@craigjones2015]

You could sell those different colors

[@brandonb417]

I'm curious why you did monokote instead of paint.

[@markoroolaid]

I hadn't thought of that, good point

[@NiCadHeliPilot]

Absolutely amazing, as always. =^/,..,^= I love the craftsmanship you put into these aircraft.

[@srartf]

Beautifully built, Marko! How much does this weigh?

[@markoroolaid]

hi, 413g

[@srartf]

@@markoroolaid Thanks for your reply! I wanted to know that because I want to build an rc plane under 250g to avoid the complications of the local law... I might try to scale down your build using lightweight PLA to see how much weight I can cut... Please keep up your great work!

[@chrisvernon7608]

what make is the mini battery screwdriver please

[@markoroolaid]

hi. link here www.miniware.com.cn/product/es15-motion-control-electric-screwdriver/

[@ebenwaterman5858]

Fooled me.

[@Arek_R.]

Under $3k of machinery and he's making production grade planes with little effort.

[@Just_Jeff_Tunes]

He has more than 3k of machinery, the 3d printer is half of that, how much do you suppose a full size cnc machine and a full size vinyl cutter is? I'm guessing more than 1.5k.....

[@Arek_R.]

@@Just_Jeff_Tunes Printer 1.5k, CO2 laser 400-600, and vinyl cutter 300-600

[@Just_Jeff_Tunes]

@@Arek_R. I must be shopping at the wrong places to find a co2 laser for 400 dollars. A longer ray10 cost that much and is a cheap 10watt laser cutter. What co2 laser in that size is 400 dollars?

[@tim7402]

Does it come with earplugs ???

[@markoroolaid]

;)

[@charleszolani9361]

Hello I have been trying to sign up to Grabcad and download the files but I keep getting errors from recapcha not loading to no response. Is there any other way to get the files?

[@markoroolaid]

Not now

[@kivikuuno7593]

Uus printer müttab kenasti!

[@markoroolaid]

pole viga

[@harlocpotter3846]

What is the estimated lfight time ?

[@markoroolaid]

5-7 min

[@dustinphillips941]

An artist is never truly done, can you get the plane sound down? Love your build.

[@colingeer479]

Someone tell me what EDF means! I've been living in a ditch for 20 years!

[@markoroolaid]

Electric Ducted Fan

[@manfredmathis3667]

Something Is Not Ok! To Weak And Slow For That Noise!! I Think The Impeller Is Not Ok! Raise The Blades For A Few Degrees....

[@markoroolaid]

You are absolutely right, I took the impeller apart and the blades were out of balance, very badly. A bit of sanding and the edf now runs much quieter

[@manfredmathis3667]

👍👍👍

[@Majuk88]

Wooowww😮👍🏻

[@ImperialArmour]

For a glider the motors are spinning a lot!

[@did3d523]

noise horrible

[@ВоваИванов-г5с]

Летать не умеешь фигней маешься

[@ВоваИванов-г5с]

Я вообще 3 года летаю на 1 планере еще 2 в запасе

[@stefano-j9c]

Great job! What profile are you using for the wings?

[@markoroolaid]

Hi, this is a very simple self-made profile. Straight at the bottom, curved at the top.