RC MN128 JEEP WRANGLER BLACK, CRAWL 2

This MN128 Jeep really is an excellent base for a 1/12 crawler. Lots of metal upgrades available for the already establised MN86.
Although is very good standard, some lower down weight helps alot. This is where I had previously gone wrong on my MN86. Which will now have a comeback.
Upgrades so far.
* 540 35T injora motor. Needs to be short version to clear the body. Adaptors available on Amazon or Aliexpress for the 540 motor to the standard gearbox
* Metal driveshafts
* Aftermarket adjustable shocks
* Metal 1.9 beadlock wheels
* 90mm Tyres. Not the softest or the best grip. But they look mean...!
* Metal axle links
* front axle moved 5mm forward to give tyre clearance. 3D printed spacers in the links to increase length
* Metal sterring horn to replace servo saver. It 'saves' too much & then fouls the front bumper when the axle is moved.
Still standard ESC, servo & transmitter. They are pretty good out of the box. Best so far for MN models.
Lighting is still standard.
I bought a spare gearbox to make the motor swap quicker & easily reversed. Note that the slipper clutches are supplied loose. I tightened this one, but it still slipped on some climbs. Needs another tweek.
I was very impressed with this truck on this first run. I got loads of footage. So expect to see lots of this one & the grey Jeep soon.
Thanks for watching.

[@cgdoublezerorc]

Beautiful rig. Amazing slow control. 00

[@RC3DPrintAdventure]

thank you, glad you liked it. 👍

[@renercadventures]

The tires look great😊👌

[@RC3DPrintAdventure]

Thank you. Yes, they are very effective. Thanks for watching & commenting. 👍😁

[@renercadventures]

@@RC3DPrintAdventure you're welcome my friend 😹👍

[@renercadventures]

Nice video my friend 😊❤

[@RC3DPrintAdventure]

Thank you very much. I really like these MN trucks. We have good taste..! 🙄

[@renercadventures]

@@RC3DPrintAdventure yes really love this model,good taste too 👍🤩

[@perohijo]

Can you please add a link for the beadlocks and the action figure? I have been looking on Amazon but can't find thos specific ones.

[@RC3DPrintAdventure]

I believe the figure is discontinued now. The wheels were purchased over a year ago now.

[@perohijo]

Did you add the hubcaps or did they come with the wheels?

[@RC3DPrintAdventure]

They are hubcaps.

[@ikichannelhiburan]

Ini terlihat keren

[@RC3DPrintAdventure]

Terima kasih banyak..👍😁

[@mazarello]

Nice run! Whats the tire size? Is it 1.9 beadlock ?

[@RC3DPrintAdventure]

Thank you for watching & commenting. The tyres are 90mm diameter & 35mm wide. The wheels are 1.9" beadlock. Both wheels & tyres were cheap from Ebay/Amazon. 👍😁

[@hsiangwang663]

Is there a link? want to buy

[@acche-rc]

What size are those tires? Need hex extension?

[@RC3DPrintAdventure]

The tyres are 90mm diameter on 1.9" wheels. No hex extensions. But the front axle has been moved forward 5mm for clearance using spacers in the metal axle links.

[@acche-rc]

@@RC3DPrintAdventure oh.. sounds complicated. Would you please make a video explaining how that's done? 🙏🙏😀

[@thatsonicTFguy]

How do you attach the black widow figure and keep it steady?

[@RC3DPrintAdventure]

Hello, I drilled a hole either side of the drivers seat & ran a cable tie around the figure & under the interior panel. The cable tie acts as a lap belt then. 👍

[@gigi_lu_bolong]

Action Figure nya ukuran brapa om??

[@RC3DPrintAdventure]

Gambar adalah 14cm

[@hsiangwang663]

Is there a link? want to buy

[@RC3DPrintAdventure]

Just search MN128 on Aliexpress or Bangood. 👍

[@hsiangwang663]

can't find the same…