Control a scale winch from your transmitter! RC4WD WARN WINCH INSTALL

[@mikesechrist7699]

That is one of the best how to RC videos I've ever seen. Well Done!

[@JOSHUAK71]

I've just about watched all your Cars and Trucks, Upgrades and Unboxing. Next is to move to the Air RC videos. Thank you for the videos and your time. You are doing a PERFECT job with your channel.

[@MilkTeaRC]

This is awesome! Thanks for putting this video together. I asked my local Hobby Store about doing this and they said it wasn't possible. I am going to try it tonight. I have the same components too!

[@COMtnPilot]

You are my absolute favorite R/C blogger, builder, and KZbin channel! You are a great speaker, you are clear and concise, and you do your due diligence! Well done! Looking forward to more awesome build vids! I have learned a ton from you! 😎

[@RCGirl]

Thanks for the kind words!! 😃

[@MadZprod23]

Your set up 😍. I've just bought the FTX Kanyon, I can't wait for it to arrive and start modding it and a winch is exactly why I'm watching this video. Thank you

[@DG-bq3uf]

Love the show and it's very helpful that you don't hide your mistakes, they're almost as important as your accomplishments.. and sometimes make for a great blooper reel which I rarely see from any RC shows except yours. Keep up the great work 😁

[@stevenf0]

She turned out to be a real head turner, Nice job. Have fun at Axialfest!

[@cezar_da_1951]

I found one of your videos and that’s all it toke me to spend $1,000 in 1 hour to just build my RTR XJ SCXii performance and scale for axial fest next year hahah!!

[@mikehogan27]

Nice rig, can't wait to see your videos from Axialfest.

[@meadowlarkgal25]

Thank you so much for the winch install tips and the step by step wired winch control unit controller instructions. I really appreciate the demo of the transmitter settings. I have the same Spektrum Dx5 Rugged transmitter. I was so happy to see it work. You rock RC Girl!

[@Ntyuask]

Another great video! Have fun with your new winch, they are a blast to have on a rig!

[@3vil8unny]

once again just amazing i love how you are so simple but enough info that its not confusing

[@jimkihn1475]

I'm new to all of this so watching you, take your time,explaining & enjoy what you're doing is very helpful. Hope to be as good as you some day!! 😊😊 Have a great time..

[@ponyboy5.0coyotewild63]

So amazing how passionate you are with all this. !!!!

[@tranceebike4724]

I’m new to this hobby, all your videos are so helpful 👍 thanks

[@MRREE-zw6xc]

First time watching your vids !! Awesome job! And wicked i watch Matt's recovery all the time!!! Another awesome tuber

[@frankkrivitz3323]

Hey "Cutie Pie" (as seen on your controller). Love your videos. Have fun at AxialFest.

[@Smile-N-Bear]

Right on Haley! Definitely put'n this on the list! Good luck at the fest!

[@ConsciousnessAndScience]

Thank you so much I've been trying to figure out how to use it without the external remote.

[@scale6039]

Great video. Have a great time at Axialfest 👍👍👍👍👍👍

[@ryguyrc8029]

Ahh thank you so much, I have had the same winch on my tf2 but haven’t ever plugged it in, this is an awesome little trick.

[@worthlessdays8365]

i cant wait to get my first crawler. thanks for all the tips! i think my favorite thing about the hobby is that scale look! so cool

[@johnestrada4546]

you are very good at explaining what you do and you know a lot, I congratulate you

[@jamiestuart6613]

I love the headlights!

[@jaytucker1]

I don't have the dx5 controller but I'm going to follow what you did for assigning a channel to my winch and hopefully it'll work the same on my controller! Thank you so much for doing this video! Wish me luck! Lol.

[@RCGirl]

Let me know how it goes!

[@Deviousone4life]

You can buy a dumborc transmitter or any transmitter with a three position switch and you just plug it into the channel the switch is. It should work 100% but you got to use to it seeing that it is harder to use the switch and put it in the middle being the neutral and left from neutral position is to pull in the line and far right position is to let line out. But dumborc transmitter works good and good quality 6 channel under 40 bucks on amazon.

[@robbrcnstuff4220]

I just put one of those on my trx4 and it works great, I hope you have a great time at axial fest.

[@Bonald1]

Thank you RC Girl, this video helped my set up my rc4wd wired winch.

[@jimkrug2586]

Very helpful video. I just used it to setup my winch on my Jeep Gladiator/DX5 Rugged. Thanks.

[@danielemulazzi7309]

Ottimo lavoro !!! ...e molto funzionale !!! ...devo acquistare subito anche io !!!....che voce calda !!...ciao bellissima !!!

[@chuckstubblefield5998]

Are there others like You in the real world???? ,) keep up the great videos. God bless

[@kevinolive354]

Solid install video

[@wiccanfpv]

I have seen so many shade tree videos on this but your video is so good and you do such good work.big fan girl im subbing now.

[@johnovandupper3810]

Looks awesome, keep it up!

[@voldemart0796]

Thanks for the tutorial it was really helpful👍

[@alanhafer828]

Wow your rig looks awesome!! 👍👍

[@CarminesRCTipsandTricks]

NICE Rig, Hayley!! 👍👍 You've really built that up right. That thing's going to Rock at Axialfest!!! Carmine ✈🚂🚙

[@kktkev]

Awesome installation video

[@exoskeletal79]

What u have is what I have.. just that I'm doing it on my trx4.. following ur vid is like following printed instructions. Nice!

[@jessewarren2689]

great looking xj!

[@Brian_Mowry__BMOW71]

Have a great time at Axialfest!

[@STEVOD313]

I wanna get me this winch, good stuff

[@bustersbashers2280]

STEVO D 313 Did you ever get this winch and how did you fix it to your rc bumper..?

[@Psyberdream]

Super clean, love it :)

[@00godlovesus]

Watching your video and driving at the same time see you there

[@chrisklemchuk5008]

Hi RC Girl, if you ever make it to Summit Colorado please come check out the crawler courses we just added the coolest winch course. Winch (lol ) I am sure you would have a blast with your scx 10 2. Great job !!! super impressed with your installation skills.

[@jimkrug2586]

Very helpful video. I have the same DX5 Rugged tx and want to put the same winch on my new SCXIII Gladiator....I'm all set now. Thanks.

[@johnbuwalda1041]

Hello RC girl, I have a question What receiver did you use when you were assigning your winch? I'm using the srs6000. I'm having trouble getting the assigned switch to work with aux 2. It's as if it process doesn't save. I've watched your video a few times along with my owners manual. Any help will be greatly appreciated. John

[@nunodias3331]

Nice video, have fun at axialfest

[@rickbachman993]

Looking good 👍, have a Blast!!

[@rallydogmakes3861]

Will this work on a enduro trailwalker?

[@outdoorsiebros9115]

Sick rick love your videos

[@outdoorsiebros9115]

Can you make a scx10 ultra 4 rig

[@earlhamil731]

Bought that winch for the Defender but no instructions. I think you soled all my problems except programming by transmitter

[@adammorgan7874]

You just found Matt’s off road recovery?! He’s one of my favorites but you should also check out bleepinjeep and Litebrite has some great jeep content. I love your XJ build good job!!

[@LRCR]

Nicely Done Video and Instructional for the Warren Winch ✌️😎👍 HFLPRCing

[@Cormano980]

Nice and simple tutorial, one question if I may, is the voltage strong enough in the receiver to pull the vehicle out ? I know the winch is meant to be used in assistance with the main vehicle running gear, but I was wondering if you had any problems with it as I'm gonna put it in a fairly heavy rig

[@greggmundkowsky5798]

Well done, hope you have a great time at axialfest. Wish I could go to one of the major events but they don't look like they are handicap friendly.

[@xxxxxx-rm2pn]

Why don't you ask them and find out?

[@ЮрийДерюгин-е4и]

Beautiful video, jeep and wuman)

[@jahmenrcbuildingasone4254]

Nice addition to the Cherokee am I wrong in saying that I think RC four-wheel-drive makes other plates to accommodate where you might want to attach the winch.? But your method is going to work just as well nice mod Haley way to show us what needs to be done. Appreciate your time and your skills as always.

[@RCGirl]

Good point, they might! I'll have to check

[@simonyoung6120]

What voltage and current does the winch use? is there enough power in every RX to cope with that power.

[@gwpattrick]

Yeah got to have a winch. I put a cheap integy on my redcat Everest gen 7 just a switch on top but hay it helps.

[@gagebenson7898]

I love rc but just spent 900$ on a scx10iii well 540$ but plus extra 900$ and it already needs a gear or something replaced and I haven’t even left 50% throttle nor have I even left the house with it, the only thing it’s done is flex on shoes and it already has a small clicking sound like it’s missing a tooth or something is wearing out very quickly I mean not even 30 min run time. But I love them, glad there’s hobby shops that can just figure out what the issue is and fix it, I don’t like digging into transmissions and trying to find the problem

[@WoodOx_85]

Can you show your whole rc collections?

[@mypassionrc-studioxd40lous66]

Your awesome dig your channel.🤘😎 like the way you get to the point 👍

[@islandrc-duke1972]

Great upgrade,thanks for sharing

[@rchokelal]

I have a winch as well. Trying to run it off Channel 3, but 2-pin JST plug is not working with the switch. Likely need this controller at add onto mine. It takes power and signal to make a 3-position profile.

[@sm587]

What about using the hawse fairlead instead of the roller one? Love your videos!

[@Leader-RC]

Love your videos, especially this scx10 and your TRX4 upgrade series, but I was wondering if you know the name of the plug that the winch uses. I'm looking for a specific wire extension and I have no idea what the names are for each plug.

[@outdoorsiebros9115]

Love the video!!!

[@77Avadon77]

This channel is fantastic. New sub here!! 🎆🎆🎆👌🏻

[@MrMrsregor]

Ever think about mixing winch and throttle ? That way the winch and tire speed match.?..

[@joshuahuff5429]

Is it one press line out, then one press back in?

[@angelmanuelsantiago1730]

Nice winch Thank you for the video

[@RCPropaganda]

When I program the radio the winch goes in or out and i never know what way its going to go. Why is it doing this, I want to hit the button knowing its going out or in.

[@RCGirl]

Hmmm do you have the rugged? The rugged has switches with forward and back clicks so it goes the way you push it.

[@RCPropaganda]

@@RCGirl omg just noticed how the switch works. It moves forward and back. Wow i feel silly. Thanks for the reply. Made me take a second look and fix the problem. Went right over my head with that switch wow.

[@johng310]

another fine video thanks

[@offthewallhobbyman6978]

I have a lot of Rc's of all types but I sold all of my crawlers years ago, however your series of videos on this jeep has given me the itch to jump back into one. I just have to decide which kit to go with. Suggestions??? Anyone?.....thanks for the awesome videos Rcgirl.

[@RCGirl]

Soo many great options out there. Axial is releasing a new kit this week, might be worth waiting for. Element Enduro kit looks good. Trx-4 (regular or sport) are always good choices. Or you can go the 2.2 route..

[@peterbleil9169]

I take it that you can't mount metal bumpers the same way as plastic ones because you could adjust it forward otherwise and secondly I didn't know spectrum made car transmitters. I swear by spectrum I use a DX 8 on my hellys and planes are they still available thank you for posting your vids are very informing. Cheers!

[@fastdude2002]

Nice job!

[@ReggieMan85]

Hey great video! What tyres are those?

[@twoloud2007]

Great video. Have fun at axial fest. Could you slide the bumper forward?

[@RCGirl]

Yeah but then there will be a gap between the bumper and the grill

[@twoloud2007]

@@RCGirl didn't think about that.

[@davecchio]

Im using additional esc to control the winch. What led front light are you using?

[@Nature_Wild_And_Free]

Are you using a 3 cell lipo with your winch? Did you have to wire in a BEC?

[@3Y3ECE]

Excellent gear!! Looking for something a bit more powerful though... probably asking too much, but a winch that can pull an rc tank? 15-20 pounds... for a recovery vehicle. Was looking into rc cranes but that got expensive lickity split! Great vids, good work arounds!! It never does go 100% the way we thought it would, but we learned stuff & stuff!!

[@jasonglaser4127]

The issue I’m having is that on any of my 3pos switches, the winch only goes one way and not the other?

[@chadzigler]

i be upgradin the winch from that to 1/10 scale Warn 8274, that little winch same as yours couldn't even move my truck since it's more than 6lbs i be doin the same, try to get it controlled by the controller even though i had the winch receiver remote velcroed to the transmitter

[@reddeerrebelrc6674]

Does the controller have " drag brake" or does it allow the winch to creep

[@lonewolfrcs1331]

i follow matt's towing to awesome channel thinking about going to arizona to get stuck just to get a free shirt lol

[@fredbradick8404]

what front bumper is that on your rig

[@eliasmachuca3155]

Where did you buy all that

[@kevinj5293]

Very good hayley that will fit onto my dog lead that rig can take him for a walk.😊👍🐶

[@RCGirl]

😂😂

[@kevinj5293]

🐶

[@andyb9994]

Very nice rig👍👍..would you recommend a DX5 rugged?

[@CoroaEntertainment]

Looking at the winch from the front, there is a small silver "L" shaped tab on the top/right side. Does that do anything when you turn it either way? On the real life sized one, I believe that is the free spool lever that allows the cable to be pulled out easily/quickly. I wonder if the RC version included that option.

[@joshkelly4682]

That is just cosmetic

[@wildsau1965]

i have the one with the seperate controler . on my next build i think ill go with this version

[@falconaz]

Want to do the same winch on my TRX4. Not sure if my radio will has a spare channel yet... we'll figure it out.

[@Jjcustomsllc]

Thanks for sharing 👊

[@rcwreck-creation]

Nice! Love the rig! I was wondering if you can assign the aux port to the throttle so the winch pulls when you as you give it throttle? I guess it’d be tricky when you’re not using the winch? I just thought it’d be pretty cool if it could work that way, maybe with an on/off switch on the leads to the winch?.... I guess if you can’t pull the winch out without reversing, that wouldn’t work ether?.... never mind! LOL!!!!! Great video! Can’t wait for the axialfest footage! 👍👊😎🍻

[@RCGirl]

I have seen someone do that before but I'm not sure I know how!

[@Deviousone4life]

@@RCGirl but you need to use the throttle to help get vehicle unstuck or over a rock. You need the winch plus your throttle to the motor of the car. They work together, because i dont think it is good for the winch to just pull deadweight it wouldnt last long you need the throttle to aid the winch. So your not so hard on your winch and so it will last you a long time.

[@vwoffroad5101]

Is the winch itself waterproof

[@paddlesworthrcpark8215]

Amazing great vid worked out nice

[@crawlerrc]

Que máquinas sois!! Gracias por el tutorial

[@TasosX]

Great video but i need your help.. I buy the hobyteck 6x6 crx18 rc crawler the electrinics is the same with power wagon fms fcx18 .. i buy only the winch not the board or the wires. I Want to install that winch on the receiver board in position 3 channel which has a 3 pin socket, how can I do this?

[@shonuff420]

PLLLEASE MERRY ME YOU ARE PERRRRRRFECTION