Rear Axle Madness On The Girth Mobile Pacer

[@FredieFarmer60]

👍🏽🇺🇸👍🏽 longer videos are good. You do you and we’ll watch em

[@FloatinPossumHoller]

Definitely keep up the technical content. They can fast forward if they don't want to set up gears

[@Tom-6502]

The diff video was TOO LONG? They're crazy. It was just fine.. If they don't have time, maybe they don't know they can pause it and finish it later. :)

[@stoker20]

Maybe they don't know how to work the video speed settings. You don't need to pause it. If you come back it resumes where you left off.

[@KevinHalliburton]

Do the videos any way you want. I'm just grateful for the constant knowledge drop!

[@coltbuildsit]

Thanks, will do!

[@donwilliams3626]

Congratulations on your W E Rock trophy. I know you have a place for it on your trophy wall. Someday it would be interesting to hear your recollections of them all.

[@kerrys8024]

I like longer videos, screw the haters. Can’t wait till you and Rory race the pacer

[@Patriotadad]

Same

[@69soulseeker]

I love it when you work on gears, I always learn something every time! Thanks, for all the awesome videos.

[@freeidaho-videos]

Pro Tip: Always shorten the tube you are notching so the hole saw only has to cut half a circle. Saves time, heat, and hole saws.

[@gonzalez7805]

Nice ... As far as long videos go , got to love the 2X speed and the scroll bar on the bottom of the video... Can't say that ive used them on your videos though...

[@norcoredneck]

Next time you have a coating like Zinc, galvanize, or other put them in pool acid. Wait till it quits bubbling and rinse with water.

[@jeepindave5464]

9 inches are legendary, but i still prefer it's big brother the 14 bolt. Full float or bust 😂

[@steven.h0629]

Looking Good 👍😎✊

[@dannydavis2046]

Hmmm, do I hear a race between the Racer Pacer and the Baja Corvair brewing?

[@ddracing2257]

Colt us true fans will watch a 2 hour video if you put it out. Keep up the excellent work brother

[@Patriotadad]

Yes sir.

[@RobB-z8o]

Agreed💯👍

[@coltbuildsit]

I appreciate that

[@frankburkett7453]

Might take a few nights of watching but sure will enjoy it😎

[@ty_thejeepguy]

"9 inches of fun" on a "girth mobile". I swear I'm just watching a 4x4 video!

[@jackymurphy2848]

I like how you show as much as you can. For those that are looking on how to do. I'm 62 years old and do it myself. And you have should me some things.

[@mrnegativity7056]

didn´t OnX change the rules so that parts that was for safety like tires did not count towards the budget?

[@DennisMcGrew]

great as always great content very entertaining

[@backwoodstherapy]

You only need about 5.5” for fun, sir.

[@Bigdaddyslasher]

I enjoy your long videos when you're building because you get into small details that many people don't know. I look at them as learning opportunities.

[@eetyuiz]

Been watching this intently! Please put the flames on like the Wayne’s world pacer! I am building a tj with trailing arms and hopefully airbags inspired by Dave chapelle. Question I have though is with bushings on the trailing arms like you have should the lowers be parallel to the frame rails and upper triangulated or will they work as triangulated uppers and lowers? Good luck on the build, I’m loving it!

[@michaelcrisman8791]

Video request...Some day will you make a video showing us the behind the scenes how you track down late model parts for your custom builds. For example, how did you figure out a Chevy Astro gearbox was the right part you needed for Smokeshow? This would be a huge help for any of us that are not walking encyclopedias of old part specs. Thanks and keep up the awesome work.

[@az-squatch6854]

Do the videos how ever you want Colt, it's you channel after all. People will complain no matter what you do.

[@Mister510]

Former NASCAR super late model crew chief here. WD-40 is a great tire softener and it will not trigger tire softener sniffers. Not sure if that's a thing with off road racing, but it sure is with racecars. We used to hose tires inside and out daily with WD-40 the week before a race. Keeping them in garbage bags doubles the effectiveness.

[@robertr4193]

Another step along in the progress of getting the Racer Pacer/Girth Mobile finished. Looking good.

[@cadilakisrodcustom]

I ran a set of those SSR's on my toyota, and they were pretty good once I did the pineapple cut. The pacer is definitely my favorite build in this series. Also, im a true colt fan so it doesn't matter how long your videos are I'm still gonna watch it.

[@coltbuildsit]

Right on

[@davidbreaux5989]

Soon I plan on building my first off road automobile, I'll be watching your videos again for all your expertise and tricks.

[@Island-Born-Man]

👉Appreciate the Scripture. Excellent craftmanship and attention to detail and on the axle.

[@greasemonkey4god]

Colt- I didn’t watch the whole video. But I saved it to my “off-road build” list in case I need all the info.

[@EfiLiveLB7]

I didn't think this was longer content. As long as it's captivating, I'll watch. All your content is interesting. 👌👍

[@johncraig406]

Another Vote for keep up the Technical Content, those who don't want it, can fast forward.

[@bradleymadosh911]

I have a couple license plates for you from the Menominee Indian Reservation. Ill send you them soon

[@DouglasYoung-tx8xf]

I really enjoyed your last two videos of where you took time to explain all this and those knuckleheads think it’s too long. Just tell him to shut up don’t watch I enjoyed you need the time to explain to understand and do what you do.

[@wiresmith2398]

I've got to admit that I'm not a huge fan of the longer content, but man that's a me problem, not a you problem! That axle is looking gooooood, cant wait to see it under the car!

[@ryanhubble9157]

After that video i dug out all my parts and started building my 44 for my tj keep it up

[@vernshark4294]

Morning Colt

[@TheRenaissanceBuilder]

The title alone got me lol, fantastic work colt!

[@glenludwig5135]

Put you special plates around the mezzanine over your man door.

[@chisbang53]

You need to add a Dodge Colt to your fleet. Colt builds a Colt?

[@markarnold5898]

As lifted bubbles go, this is my favorite.

[@floydstowe]

I love going to junk yards it's like going on a treasure hunt

[@Bigdaddyslasher]

Colt the sidekick whisperer!! LOL

[@dutchloveRC]

GREAT VIDEO! God Bless

[@waynemorrison9673]

Long videos are awesome Colt !

[@wadebowman-gw4uy]

Buddy I've never done anything like what you do but it's fascinating. You explain exactly what you are going to do, why and how. The detail really makes it interesting.

[@coltbuildsit]

Thank you

[@MrBillsfishin]

Thanks for another great video. Lottery would be having you upgrade the axles on my 73 K20. You do amazing work Sir. Thanks for all the great content.

[@doughaven-rf8id]

I could keep Colt busy for a month gearing and locking my WJ build. But, I guess I'll just have to spend 6 months doing it myself. lol

[@kevbev1524]

Do what you gots to do.... Idiots will just have to figure it out or ask alotta questions, I'm a ask alotta questions person if I need to.❤😂😊

[@wiresmith2398]

Man I'm both. I had about thirty hours to ask questions in the five seconds or so it took my boat to fall off the trailer the other day

[@davidwhite7309]

Colt I really enjoy how detailed oriented your. It’s nice to see,along with Tom Tom

[@coltbuildsit]

Thanks!

[@DavidMiller-jw9sk]

I love hwy 64 auto

[@diyjeepguy7713]

Make your videos as long and in depth as you feel necessary. Differentials used to be intimidating, but your videos have helped me figure out how to fix my F150 rear diff. I love watching and learning that stuff, I also like to be able to reference back to those kinds of videos. Also you probably know this but vinegar takes the zinc/galvanized coating off of hardware and also seems to remove anodizing or whatever the goldish plating on grade 8 stuff, it does sometimes take some time but I do this every time I need to weld those things. Thanks for the cool videos.

[@briansaenz4392]

Dinosaur Colorado USA saying hello and stay safe out there brother ❤🤔👍🤙🙏🙏🙏🇺🇸🇺🇸🇺🇸🇺🇸

[@joshuabaker5712]

I'm getting really tired of OnX changing rules durring the build. Love your work as usual.

[@LawlessOffroadAdventures]

A 16v's, and ya left them? was it not worth the trouble? or wasn't on the list "today"? But half burned tsl's are in their prime 👌 not a cheater tire but a solid tire for sure, hard to beat. Looking awesome Colt

[@klaasbloem]

I love the channel but wish people could keep their beleves to themselves. It's called belief for a reason....

[@ldvan100]

Everybody is entitled to their own opinion.. This is Colts channel and Colts belief, along with mine.. You don't have to agree with us but it's still Colts channel..

[@klaasbloem]

@@ldvan100 Just like women may have a opinion about abortion but no rights over their own body? That's the problem with religion, they always want to force the sh*t from their holy book upon others.

[@ramjam720]

Colt, I have a '92 "Sidekick", but here in Indonesia they are called Vitara. The also made a 2WD version called Escudo. Mine is a manual trans with a 1.6L SOHC. The standard gears are 5.13, but I want to go lower.

[@jeremyfranz9129]

The bible verse at the end of the videos is a nice touch! What do you recommend for axle paint? Looks like Duplicolor? I'm working on a e-locker axle with my son for our 4Runner and want to paint it before it goes in. I'm learning a lot from your videos. Appreciate you brother! God bless!

[@JDZiemba1773]

As I have said several times....BEST CHANNEL ON THE WEB.... pls don't dumb down the technical stuff...if it's longer than optimal for some they can hold the 2x down ....ok god bless you all ❤️🇺🇸

[@bp4887]

As a 21 year Retired Vet that is also disabled, thank you for those kind words and the sentiment of putting those plated in a special spot. Love watching you work and I am on the side of loving the detail you put in!!!

[@rippleeffect3910]

I loved every minute of the vid. Not that I'll ever own a 44. However, breaking it up to a couple/ times a week would be awesome! Totally sucks to wait all week for some of our favorite tubers. But, I'll take it however I can get it. Keep up the great work, Colt. God bless you, man.

[@dustinsnider1646]

Big fan of your content. Keeps me motivated to press on with my own project. The work is slow going! 😂

[@Moose400ex]

Super awesome videos colt! I personally Like the longer videos. Explaining things in detail and not just boasting thru the fab isn’t the way to do it. Some people want just the information and don’t get taken into the video. Screw that take your time! No reason to shorten things and cut corners and leave any doubt! I like how you explain everything thing in detail it’s the attention to details that sets fabrication apart from just slapping something together! Dude I love the funnel tree! I had to pause and rewind a few times to study it and figure out what was going on there! Great idea! All the left over oil in the funnels just flows down into a jug! If you’re collecting license plates…dude! I have stacks of the things. Mostly all Colorado stuff, bunch of motor cycle plates and weird stuff. Some are mine over the years, and a lot of them are from when I worked At the Chevy dealership in Gunnison! They had boxes and boxes full of of license plates! Stacks and stacks of them! You can have what ever you want if you’re doing a license plate wall. If you’ve ever been to crested butte there’s a famous old house there in town, that’s been covered in license plates for 40-50 yrs. It’s famously known, it’s called the ‘license plate house’ I think it’s now a coffee place in CB. But it’s famously known…and There’s a guy in Gunnison that was doing kinda the same thing on his barn/shop with license plates, road signs and metal signs. I gave him a big stack of road signs and plates one time when he was first getting started. What’s the infatuation with sidekicks? You wanting to build a samurai? I know everyone that’s building a samurai wants the Suzuki sidekick motors, there a little big bigger displacement and fuel injected. And they bolt right in I think? I had a Suzuki sidekick years ago when I was still back in woodland park/ divide I bought off a buddy for $300 lol, it ran and drove and everything, it was only Missing the hard top, and the factory soft top was trashed. I drove it around all summer in woodland/ divide and the springs with no top on the back lol, got stuck in a few hail/ monsoon storms on the west side of the springs waiting out the storm under a bank drive thru covered roof lol. I rigged up a camo harbor freight tarp cover just incase I was out somewhere and couldn’t find cover. It didn’t have carpet and I drilled additional holes in the floor so any water could drain out the back lol. The body wasn’t the greatest, it was straight but it had a little rust in it in the floor from years of sitting with no top on it. But it was a running little mini monster! I sold it to some guy that wanted it for a Samurai swap. The auto trans was staring to slip a little, that was the only downside was it was an auto. Would have been better if it was a manual 5 speed I would have kept it, but having only $300 bucks in it i was set up pretty good to not loose any money. The motor ran great and hardly had any miles on, just over 100k miles on the dash it was solid as the came. There definitely getting harder and harder to find these days. I’d love to have one just to buzz around in again. That thing was a blast. Simple, basic, nothing to complicated or sophisticated, 4wd and light weight and fuel efficient. And easy to mod the heck out of. A solid axle in the front would be so easy. Everyone wants the motors for Sami swap but i think doing a solid axle swap on the sidekick would be the way to go. Suzuki Sami’s are hard to come by these days, in any decent solid condition that isn’t beat to piss and rusted out. I think a jeep front axle would be perfect. Nothing crazy big or hella built, lol the little 1.8l ego motor don’t have that much power. A jeep dana 44 front axle would be over kill id think heh. Maybe even a cj5 front axle, like what a dana 20 or 30? Would be about close to the same width? Do front and rear cj5 or cj7 axles to keep everything paired up and the same. I’ll keep an eye out for ya over here in grand junction! There’s all sorts of hidden gems over here that people don’t want.

[@andyweber8606]

My two cents, I love the detailed video but I don’t usually have time to watch a video that longer then 30 minutes. Keep the detail but break it into multiple episodes. Not sure how that works out for you and the infamous algorithm but it fits my viewing preferences. I’m typically only watch the long videos when I’m in my shop working on my own stuff.

[@greasemonkey4god]

Colt- the reason the rake changes the drivability. (Not counting jumps) is because of the change of caster angle. Lifting the rear of a vehicle without properly aligning it will result in a lower caster angle and that squirly drive…

[@SuperDeucecoupe]

Colt I appreciate the shout out and it was my honor to serve. I was also an EMT/firefighter. Next time through NM we'll try to get up your way. Not necessary but if you feel like it some stickers for my buggy would be nice! Thanks again for the content.

[@TyphoidSnaily]

I gotta to thread through 10.9 Bolts on the front hubs of my Kubota. It has Bolts from the factory but its a Paint to thread them in from the outside while holding up the dang tire lol You have great content and enjoy how you explain things instead of just mentioning it and moving on. Please keep it up!!

[@TheOldaz1]

Matt says older worn tires are much better than new for sand and grip on rock. Nice job on the 9".

[@SuburbanK2500]

Colt, do you have any Nova Scotia, Canada plates, if not I'll send ya one if you'd like.

[@1a1u0g9t4s2u]

Another great video jam packed with tips and tricks. Wish I had the experience and knowledge you have. It is great that you take the time to educate and share that knowledge with us. I have a Suzuki Samari that one day I want to convert it into a rear steer buggy. Thanks for sharing.

[@DonnFonos]

Do the Captan Morgan most guys are same . Capital M little organ

[@talon0863]

Thank you for the detailed Dana 44 video. The editing and camera work are butter-smooth great work!

[@garyinman5400]

My stock 1986 F150 had a wider front to rear ratio than that. I was shocked when the rear dif exploded and I learned this.

[@thomaslyon2112]

What are you going to do about the rear glass. I think they are as rare as chicken teeth. LOL👍🇺🇸🤪

[@mikecrawford7352]

So your s-10 has a turtle painted on rear end cover. In spirt of the movie, you need a clear dome with a red light inside a camera aimed at it. Lmao it would be worth it even if it only lasted one trip.

[@geocachetheozarks2215]

I love how your wife still rides next to you while driving. That’s awesome.

[@samcobuggies984]

Your how to dana 44 lenght was just fine, your use on rtv on areas with orings hurts my soul. 😣

[@chrishall9208]

We call junk yards the mens mall lol. Great video as always! Thanks for sharing and teaching at the same time.

[@curtisalbert1846]

I watched it twice but I do not have four-wheel drive the only thing I have is two-wheelers I have motorcycles but I want to build a trike I need to learn how to build a rear end on a for a truck

[@jeffanderson6217]

I love the build content you are putting out. Keep up the great work!

[@brianjones3245]

There was a used Samurai for sale in Kirtland by the Southwest Tint shop

[@Greg-x8g]

Hi guys doing great work on pacers love seeing your shows every time

[@mattbrowder669]

Watched this video based on the title…… this is not what I thought it was going to be, slightly disappointed

[@timjackson5555]

Jump on the bandwagon of.. everything's safety_

[@michaelbishop242]

that bolt looks the same as a ls truck intake bolt... i wonder how close to the same it is.

[@jonathanheath294]

Colt u should be putting licens plates around the grills

[@Muffduster]

Why not use LubeLocker gaskets?

[@ant_havok1794]

I enjoy the longer videos keep it up

[@kc6nfv746]

Why build the pacer

[@pitt42075]

I appreciate the in-depth build.

[@gjo7870]

I love the pacer looks great

[@BrendanNitsiza]

Where do send the license plate

[@whattachick1]

That's what she said....

[@texasspeed2003]

That celica gt was cool

[@isomer13]

Thanks, Colt.

[@mikemassey1405]

Sweet work 😊😊😊

[@Mhurtle65]

Nice....

[@kevinfoley7704]

I'm really surprised you aren't over 200k viewers yet. Great video.

[@coltbuildsit]

Wow, thank you!

[@cheycasters]

Thanks!

[@TwistedOff]

✌️

[@ronthompson2366]

😎👍

[@radeknemec1397]

👌👍☕cz