REBUILDING AN ABANDONED LAMBORGHINI MURCIELAGO | PT1

Grab a YFood Taster Pack Here USE CODE MAT-KZbin 👉 bit.ly/MatArms...
I risked everything and bought a Lamborghni Murcielago which was left abandoned at a track experience company, after somebody rebuilt the engine incorrectly. Its now my job to rebuild and restore the car back to its former glory. I called ‪@tavarish‬ for a little help and advise as im sure he knows a little about Manual Murcielago's & also some help from ‪@Ratarossa‬!
⬇️ SUBSCRIBE TO THE 2ND CHANNEL FOR EXTRA CONTENT ⬇️
/ @matarmstrongmk2
Check if your car was damaged with Car Vertical - 10% off here 👉 www.carvertica...
⬇️ ALL MA MERCHANDISE ⬇️
matarmstrong.c...
⬇️ Follow Me Here Aswell ⬇️
/ matarmstrongbmx
/ matarmstrongbmx

[@Quietly3mpowered]

Hey Mat, you mentioned of needing some of those pins doing? I’m an engineer and could knock some of them up quite easily. I could also grind them down to the correct size so that they are a very smooth finish. If you need me to do this for you, reply back and we can go from there :)

[@OriginalNoseBleed]

Get this post to the top people 😆

[@nosher203a]

What a great video 🎉

[@Ratarossa]

Well done buddy, you did the right thing stripping it down further after we left. This is going to be an EPIC build .... keeping these fingers crossed for you it all comes together without MAJOR expense🤞🤞🤞

[@MatArmstrongbmx]

Thanks for coming down to help mate!!

[@mohammednasr6130]

@@MatArmstrongbmx Please upload the rest, the suspense is killing me, I gotta know what happens next ffs😂😂

[@charlottecooley2428]

@@MatArmstrongbmx will be fine anyway as even if you shell out 30k - 50k fixing its a keeper and will go up in value. These things are very special cars.

[@kaineburchett3947]

100 k for a gated murcy, I reckon there’s plenty of meat on the bones for this project money wise

[@marktaylor9678]

Thats great to see you giving advise to Matt...Ive actually subscibed to your Channel as well now

[@unmountablebootvolume]

Hey Mat, when it comes to fixing the cluster, if it has any chips labeled ULN2003 in it, change them out. They don't have internal protection, so they are always the first thing to break in VW-made clusters when a battery is hooked up wrong. I already wrote this under the last video on the Lambo, but I wasn't sure if you saw it, so I'll post it again here.

[@Dpwtv]

You are actually Mad 🤣

[@unmountablebootvolume]

@@Dpwtv Nah, just been fixing stuff for years, these stupid ULNs even killed the control board in my heating system, leading to a bunch of cold showers until I could get a replacement. They also are likely the no.1 cause of dead dishwashers and VW ECUs. I wish the manufacturer would add a simple diode to protect it, would prevent literal trainloads of Ewaste every year.

[@timc3600]

ULN2003 is just a Darlington driver array and it does have built-in protection diodes, look at the datasheet (TI website) and see the COM pin. If the battery is hooked up wrong, nothing is going to save a device, its way outside of the voltage spec and power specs of the device - and virtually all the other ones in the car too. If you look at the datasheet and look at the functional diagram, both protection diodes would be forward biased with -12V applied to them and all would cook since there are hundreds of Amp Hours of power into a device that is designed to protect the loads which its specified to handle just 0.5 Amp and has protection in the same sort of magnitude. I agree though that if the polarity is reversed, they would die and need replacing, but your view on the manufacturer adding in protection is wrong - The protection you call for would not allow them to operate at all in the 99.9% of cases where they are correctly used. Similarly, the size of the pins on their package would simply melt irrespective of the magic protection you are calling for, so its not possible. Any protection should be on the input to the board, not on the devices themselves. What Matt showed previously were just cooked resistors and because some were still intact, he can read their value and replace all of them with new ones. As to if anything else is cooked, well, thats a completely different discussion and will need diagnosing stage by stage.

[@r0beh280]

I’m a huge Tavarish fan, Freddie is the man. Great to see him on your channel, I love your rebuilds.

[@lillexus5589]

Still waiting for the SL manual swap

[@Kapb19]

Dream job, dream cars and you get to work with your loved ones. What a life! Keep up the great work Matt!! I met Matt in Leicester filming the Aston/Bond video, he was nothing but humble and friendly... The best channel on KZbin!

[@zollotech]

Loving the series. Looking forward to the next video.

[@mysterious7386]

Hi❤

[@mysterious7386]

I’m sub to u

[@ondrejjanoska660]

Would not believe to see comment from itoys master 😂

[@AerialAnt]

So the previous builder can't build an engine or rob a bank......shock horror Great experience to share with your old man. Love the content 👌

[@MatArmstrongbmx]

Glad you’re enjoying it 🙌

[@georgiapatrick5154]

Laughed out loud about the armed robbery engine builder. Looking forward to seeing the rebuild.

[@matthewscruggs7104]

I normally don’t watch videos like this because I’d NEVER be able to afford anything like this. But you have made it so entertaining and educational that I can’t stop watching.

[@zatomlzxzanamolzy1253]

You'll never achieve anything with that kind of defeatist attitude dude, all the information you need to become very wealthy is available for free online. If you're not living the best way you can imagine you need to take more risks. Until you're at the top, you should believe you're going to get there.

[@Bredddi]

Agreed

[@funfun5656]

@@zatomlzxzanamolzy1253 Maybe he doesn't want to become wealthy because it's kind of a pain in the ass to manage...

[@jun1orbaitor44]

Same, 1st time viewer here. I do facility maintenance (industrial electrical, plumbing, engineering, mechanics, pneumatics, blowers, etc), and am still in my 1st year, and was curious about how it's built. Interesting, and awesome how he shows everything

[@flexinclouds]

​@@zatomlzxzanamolzy1253Very true, came here to say this. My brother doesnt like/watch anything about supercars cause "he'll never be able to own one". But if you think like that, itll become your reality. Why limit your possibilities & goals based on what is likely. Even if the chances are small, im never ruling it out

[@codykrecicki]

Had to pause the video for a second to let you know how cool I think it is that you and your dad have such a good relationship. That’s really special man to be able to respect your father and have him work alongside you like that.

[@daanmeulendijks1431]

My dream...a father..I had a father who did not care about me motevated me with nothing

[@markharris5861]

@@daanmeulendijks1431 sad to hear that daan just makes you stronger and helps sculpt you the man today take care ..........

[@daanmeulendijks1431]

@@markharris5861 thank you mark but it's not that I am pitty or something and yes it made me who I am today ( I never was so open about it.. you are the first..a stranger from the internet..but thanks again mark

[@markharris5861]

@@daanmeulendijks1431 hey daan thanks for reply my mother left when i was 4 ....trust issues short term relations etc your childhood is so important ...but were here ....and life is good keep safe )

[@daanmeulendijks1431]

@@markharris5861 thanks again mark

[@declanjennings7455]

Being a mechanic myself. I can't think of how much pressure you're under. If you need any more help, more than happy to become of assistance! Keep going matey

[@onlypendants]

I just loved to see the camaraderie between father & son. With Dad on your side you simply cannot go wrong. Good luck with the build Mat 👍🏼

[@QC9B4XK6u]

Imagine doing your first engine rebuild on a Mercielago V12. You are next level Matt.

[@jimgoodwin6294]

Most folk would start on a Briggs & Stratton - or a Moggie 1000 - not our Mat - he's got huge thingy ma bobs....😂😂🤣🤣😂😂

[@6lack5ushi]

This man took himself to engineering school! Genuinely learning more practical stuff from him than I did at Uni!

[@markchip1]

Next level... Or completely certifiable?? We shall see!!

[@ChrisWijtmans]

its not like engines are difficult technology at least not it its core. The difficult part is all the doodads around it to make it run efficient/powerful.

[@markchip1]

@@ChrisWijtmans - The technology is not the issue, it's the level of engineering skill and competence.

[@SAVAGENYTS]

I can't imagine how it feels working on your dream car, restoring to your specifications.

[@johnhowarth7216]

Yeah but not as good as if you got to keep it after all the work is finished

[@romariosmith7776]

He’s living the dream and it’s a great watch 👌🏾

[@mbgarner]

How was your carvery Matt? 😉

[@jamesknight9676]

Stressful would be my guess 😂

[@rayrobles751]

Its the best feeling knowing you took on something you have no clue to work on but figure it out. I did this with Porsches. I bought a cheap tool kit and began. 35 cars later and i had the best time. Its really the best feeling driving a car you built yourself!

[@MarcVinal]

I don’t know how I ended up on your videos but I did. I’m 55 bought 3 children up on my own I’m a grandad to 7 now & live alone with my Staff Tyson. I subscribed to your channel as I loved the way you was so happy to get the lambo & that made me smile too. Then I watched your “I bought x amount of houses plus cars & quit my job”! You’ve put so much effort you truly deserve all you get you truly do. I watch your channel with it’s more to watch you & the excitement you get out of doing them & that to me is a buzz in itself. Keep up the good work & im happy to be along for the ride (so to speak)! Stafe Marc

[@neilsinclair7860]

Matt, I discovered your channel at 02.00 in the morning after a no sleep event, I became addicted instantly for a number of reasons and watched all your Audi S3 rebuilds in one sitting. I’ve just watched your new Lambo rebuild video and can’t wait for part 2. Your presentation style and addictive enthusiasm have me watching for the next instalment.

[@gustennant5469]

Hi Mat, great to see your Dad helping you again. You were dead right to strip the engine. You couldn't trust the other guys work.🤠. This is going to be an epic rebuild. It's just nuts and bolts. You will be well able. You have done worse jobs. You will come out on top. Keep doing what you do best.🤩👍. Can't wait for the next video. 🤓👍

[@jamiedavies8795]

You’ve taken over KZbin matt absolutely smashing it bro ,it’s crazy home far you’ve come in just a few years ,keep the great content coming 👍🏻

[@datahudgens8883]

Unbelievable! I just stumbled onto your channel the other day and have already watched almost a dozen videos. I'm hooked! You're my hero! I love working on cars and am slightly mechanically inclined. I've had several projects but could never finish them. Watching you at work on your projects has inspired me to keep trying. Even my wife enjoys watching with me! Keep up the great work!

[@Skaggs666]

Same!

[@-jimmyjames]

Had a similar experience w a 04 Audi S4 V8. After the stealership and two Audi techs. I fixed it. I took cap off. Removed engine. As the chains are against the tranny. Rechained. Grabbed Audi timing tools. Set time and new cam adjusters. Bam. Happy customer almost 10k later... I'd def tackle this Murcielago. I was working in these vehicles when I was 19. First Supercar full experience for me was a engine out Porsche. Now I drive a 5.0 SC Jag X351. Love this stuff

[@theclutch19]

Dude... WOW... just WOW... It's not just that your mechanical skills are exceptional, your PRESENTATION skills (assuming it's actually you who's doing editing and such) are just as excellent. Some of your videos seriously have me at pinned to the screen watching in anticipation on what happens next. I actually have to get off the toilet to watch your videos on my larger screens! I.e. - your videos are "big screen" worthy!

[@smusyk2859]

Just gets better & better, our late father was a mechanic, so nice to see ur dad helping out, respect!

[@jeffwatt2627]

Your channel just gets better and better as your projects increase in size and difficulty. Look forward to seeing every new video you bring out.

[@hardf1fan255]

This is the content i love and support your channel. Tavarish used to make videos like this i loved his channel but now his channel went some other direction and its sad he is not doing it anymore. He puts now some 1h timelapses its not detail series. I would love to see this tipe of rebuild with his scuderia 430 .. keep pushing Mat and stick to your DNA in your work

[@LilithTitan]

Tavarish was the first channel that I found who did this and I've been hooked since. Long before his new shop and long before he blew up. helluva hookup to have him here. Also, what this is showing everyone is no matter what car, if it's a dream car that comes like this. An engine rebuild is probably a must as precaution. This is too expensive not to retorque everything yourself for validation.

[@wastelander89]

Nothing better then having a dad.when my dad was still alive we used to fix and work on cars all the time. Its the best having dad there to help because they always know wisdom to help when u get stuck not knowing what to do.great series. I love the videos

[@Joshua.Cook7]

I’ll never be more impressed with your determination, drive (pun intended) and perseverance Matt, your content really makes me truly inspired to do work on my own car! I am constantly itching to see your next upload across all of your projects because of how well you put together your videos, matched with your positive and enthusiastic energy. Don’t change my bro!! Side note: I was NOT expecting a tavarish collab😭 the duo we never knew we needed😮‍💨🤙🏽

[@choppermarc2342]

Looking forward to this build. Nice to see Tarvarish and Scott.

[@jpiazzola]

All it takes is courage Matt, and you're showing plenty of that. You'll be a master mechanic soon. Really enjoying your efforts.

[@randallparker8116]

On my Miura, the engine had sat for 15 years with these tall velocity stacks and no filter. I ended up re-sleeving the block. Add the Transmission cast into the side of the block made that job a challenge. I was cringing until you decided to pull it apart. One other thing I did was turn the Crank shaft down .010 then hard chrome it up .020 so I could index the crank to standard. My runout was only .0001. I had an Indy Car Engine builder do that for me. It is a piece of art work. It hurt hiding that perfect crankshaft inside an engine.

[@gogs97]

Been watching for years but this engine rebuild has been the most enticing content to date!

[@Oxygen_Thief]

100k damn...hope this all works out for the best,keep grinding💯

[@pintumax2634]

I am very grateful I found this channel by chance. The passion you literally put into your job is amazing. I am Italian and I am very proud watching you repairing one of our most beautiful car. Waiting for your next episode! 🇬🇧🇮🇹

[@necorrigan]

Kudos to you Mat, following your dream and buying your dream car. Sadly I can't offer you any technical support, but I'm subscribed and liking your videos to show my support for you and your ventures. Best of luck with the re-build, looks like you're also making some great memories with your dad. Peace out!

[@MatArmstrongbmx]

Thanks mate!

[@Rockport1911]

I was less suprised by seeing Tavarish than I should have been. Best advisor for this Murci, hes been there and done that :)

[@XqeDiosxqe]

Amazingly you decided to open it up and found a bunch of goodies in it. And saved yourself a lot of money. And learned a lot of knowledge.

[@SuperYachtCaptain]

Epic project, looking forward to following the rest of the rebuild. 😎

[@timdady4660]

Mat , how wonderful to be working next to your Dad, it must be a joy to learn from him. fantastic video. well done.

[@Twitchtvhaydoknight2]

lol

[@markhillan4038]

this series is gonna be so freaking amazing. please keep the content this high end and please don't stop showing us all the bits and bobs of the build and how it all works....I'm utterly useless when it comes to building engines but it bloody fascinates me to the point where I feel like I'm learning along with you !

[@peccatumDei]

I've never touched a V12, but I have stripped down and rebuilt a relatively simple V8, and even there, torquing down the head bolts had to be done in stages to an exacting pattern. So regardless of how easy these were to remove, you're going to need the right tools to put them back. Money definitely not wasted.

[@jmathijsk]

Oh man! This is wholesome! Your dad helping out, Freddy and Scott! ❤ Have fun with the build 💪

[@justturner9702]

I just love the growth you’re making Seeing tavarish on your channel felt really good The only way is up from now

[@locky1227]

After watching this l can quite clearly see why the “mechanic” left and took up a new career !!!! Unbelievably brave of you and your dad to take that engine on 👏👏👏👏

[@Chris-hw4mq]

I hope so would want that idiot rebuiling more engines

[@Lockyoriginal1]

@@Chris-hw4mq 😂😂

[@Piatification]

He definitely quit to avoid being asked about this car, what a trip

[@mrwilson7617]

A new career at Costa Coffee. edit: He's working in the prison laundry room.

[@Lockyoriginal1]

@@mrwilson7617 😂😂

[@LV18t]

What a mega project, at least you will have peace of mind once you've done it all yourself. Also I think it's brilliant you can share the experience with your old man and have them memories forever. All the best, quality content as always 👍👍👍

[@Ercolone69]

I wish I had a dad like yours. Amazing person and you are so lucky! Very good channel!

[@stephencorbett7015]

Hi Matt, hope the engine rebuild goes ok👍🏻please make sure that you check the valve run out as incorrect cam timing can cause the engine to lock up and bend the valves. Any valve that runs out by over 3 microns should be replaced. You don’t want to rebuild it only to drop a valve when it is finally running. All the best and looking forward to seeing the next video.

[@haciendadad]

I'm an engineer with two degrees, and I have a lot of respect for your self-taught knowledge on these exotic cars and your fearlessness to tackle such tasks, raising the bar each time. At your young age, you have the knowledge already of a well experience high-end mechanic and you have a lot more time to learn more. You are a special person, and I love watching your videos. I wish I could work with you for free, just to learn a little about car mechanics. Finally, what I love most about your videos is you are always so cheerful in-spite of the situation. That is probably one of your best qualities, and that is saying a lot considering how many good qualities you have and that cheerful attitude is probably why you are so fearless. I'm sure your parents and your wife have a lot to do with it too, giving you the opportunity to take chances and allow you to fail, but learn from those. Have kids, you would be a great parent too, and can pass down all your knowledge and gain a helper in the process too. 🙂

[@MartinMcAvoy]

Maybe the best comment I ever read on YT Joey and you are right, Mat is fearless and all truly successful people must have that drive to resolve whatever problem they face. This is a great channel!

[@stephx9759]

You know, there’s a whole team behind this production and i can tell you that the man you’re looking at is your oldschool host and not the actual fat greased up 45year old balding guy doing the actual fixing. It’s all about appearances just like tv was, welcome to youtube 2022.

[@haciendadad]

@@stephx9759 sounds like you think the whole show is faked. Believe what you want and so will!

[@stephx9759]

@@haciendadad ignorance is bliss, that’s right, enjoy the show ;)

[@leewolf6434]

This is it Matt. Qualification or not, once you’ve rebuilt your first engine you are officially a mechanic. No question about it. Well done to you and your progress!!! Love this channel

[@AndyG_MTB]

Cant wait for this series! Super cool to see everyone coming together to help out

[@Jshotzz772]

Engine is already out and if your not 100% sure it’s a redo. Glad to see further in the video you decided to rebuild it. Rebuilding an engine is not hard just time consuming and check ur work 3-4 times over

[@andyperrin974]

I watch all your videos, they have given me the confidence to tackle things myself, after watching this I fixed the washing machine by changing the carbon brushes on the motor.

[@Bacon__SteezBurger]

First motor tear down ever is a v12 murci motor, AND it’s a full on **wing it** job 😂 that’s so absolutely incredibly insane 🤣 and EXACTLY why I love your channel and your builds. How can you not love this man’s channel and projects!? Like I said in the last video, I can’t wait to follow this build and see where you take it. Going to be such an awesome project. It’ll never cease to amaze me how far you’ve come in such a short amount of time, and the levels of cars you’re now building on from when I first started watching on my old banned account. As always, stay awesome man 🙌🏼

[@tapiwagotora6833]

Sending love from Zimbabwe. Love your videos mat. I've found d myself looking upto them 😄

[@kevinclark6968]

Stumbled across your channel last week and just watch the Porsche&Aston Martin builds unreal what your doing and gutted it’s took me so long find this channel can’t wait to see what you do to the Lamborghini 🙌🏼🙌🏼

[@adrianflorescu4080]

When I saw the video of you wanting to buy a Murcielago I thought you should get in touch with Tavarish. And now here he is, I am glad.

[@Fizzie_pops]

17:14 That joy from your dad's face 😢 cherish that

[@TheCharlesAtoz]

Can't wait for the rest of this story! Amazing journey you are on!

[@lewishyd]

Absolutely buzzing for this series Matt

[@bigphil9714]

Not really interested in cars but the way you deliver your videos makes it more interesting. Subscribed due to the previous Lamborghini video and awaiting the results. Good luck with it mate 👍🏻

[@SpaceRanger187]

How are u not into cars?

[@bigphil9714]

@@SpaceRanger187 I own a Q7 S Line but more into my football mate. Plus I have a missus. Hope that clears it up for you pal 👍🏻

[@motwork4136]

Hi Mat, i started following u since u had 100k subs, cause working on cars is a different story, and I think that no one who’s not a car guy can’t feel it the same. U started small and slowly, but now 600k and working on ur dream car is on another level. Keep going cause u are d best. 🖤🖤

[@cavinsewell1455]

Matt, dreams should have no limit or price fixed to them! Once fixed you’ll forget the price it cost you but you’ll have smiles for miles. Keep up the great work and content! Huge fan

[@philipedelmann397]

I really enjoy when your dad is laughing. That´s priceless! Congrats to your channel and to having such a wonderful dad.

[@frasermacleod7642]

Absolutely awesome Mat. So glad you stripped the engine but I certainly didn’t expect to see those type of mistakes, obviously you were shocked and relieved to decide to strip it. Really looking forward to this build, what an awesome car and even more special as it’s your dream car. Well done and good luck 🤞🏻 😉👌🏻👍🏻

[@BimmerBrudda]

Can’t wait for this build!!!!!

[@raybaby7895]

you really are the best person to get this car. It takes someone who can work on it themselves and has a facility for that work and a passion for the car.

[@stevensmith7021]

Wow! You are absolutely fearless Mat. Hope the engine goes back together well and cannot wait to hear it fire up... you've got this!

[@darrenparfitt1520]

Great series , can’t wait to see how this one pans out. It’s also cool your doing it with your dad 👍👍

[@bullsaye7]

It's amazing how far you've gone in the past 2 years. I've watched you since Covid and I love every episode. Keep going Mat!

[@Speedsnapcreations]

So excited for this build 🔥🔥🔥

[@alternativefandotcom]

I've been spending a sick day doing a deep dive on your channel and have been watching your videos for far too many hours now. It's amazing watching you bring all these cars back to life! Cheers!

[@burgerjointgame]

wasn't expecting to see Tavarish! Just the guy to get the job done - lucky you!

[@andrewjones90]

This series is going to be epic! I actually can’t believe you’re brave enough to tackle this! Been watching from the start and seeing you grow strength to strength! Hard work really showing! 👌🏽 can’t wait to see the end product!!

[@erikgammeltorp1394]

Really love your work! Keeo up the grind ❤

[@hazzamozza1343]

Honestly you HAVE NOT OVERPAID and yes I’m serious, considering that your able to do this kind of build is PHENOMENAL and absolutely amazing. The murci is my dream car too and considering where the market is at, some of these murci a Lagos are around 600,000 Canadian so you’ve done very well 👍😝

[@brendanfleming6584]

These are £150k-£175k in Britain right now in good working condition - with a manual transmission. This could be the one to break the bank.

[@cheesyisgod]

In the UK 150,000 for one with full service history and lowish miles

[@tom4626]

That’s kind of you say but when the market has clean examples the particular cost grenade he’s holding is for the faint of heart

[@corsogaming8302]

How much did he pay

[@hazzamozza1343]

@@corsogaming8302 he paid £100,000

[@fastasfox]

You have payed over the odds BUT it's your dream kidda...and only you know what that dream is worth. I rescued a boat and it cost me much more than it was worth to rebuild.....but that was my dream so I get you 100% and I don't have any doubt you will make a cracking job of it.....thanks Matt.

[@JoeTjoepJoep]

Really looking forward to hear this engine roar once again, nice build Mat.

[@NastyDropz]

100 thousand pounds of your money is keeping me entertained love every minute of this Matt, one of my favourite builds yet

[@NE-MTB]

Is it sad I’ve been checking everyday for this video 😂😂

[@steverobinson7650]

Matt, have to comment and say that I love this build, and you’re channel is smashing it. At a time when other channels are struggling you are doing a cracking job. Keep it up!

[@bayuaryanto4017]

Good luck on putting the engine back together. Can’t wait to see the car once it’s done.

[@chiranthh8279]

Oh man!!This is going to be a sick rebuild series 🔥

[@Skysleepr]

This rebuild is going to be one for the books and can’t wait to see the next episode!🤟🏾

[@thedownshiftchannel]

Buying it was a bold move but I’d love to see it work out for you 👌🏽

[@steeleyg225]

Absolutely amazing this build is going to be, so glad you decided to take the engine apart... and what a great partnership to rebuild the engine with your dad who seems a top bloke

[@paulnaylor6035]

Shocking I love and even as a boy first time I saw a countach I was hooked and being in the building trade across all fields people are dodgy at what they think they know or think they can do often worries me about surgeons or doctors??? Great video new subscriber 👍

[@tavarish]

good luck dude! also please sell me your car.

[@MatArmstrongbmx]

Thanks for coming down to help 🙌 maybe if I have that engine first 😅

[@EDREdgarDRas]

Like all other projects, it’s gonna be great! …. For us at least!😂💪🏻👌🏻

[@mysterious7386]

First❤

[@liamlongwe9083]

He's actually first

[@johnvanhal2450]

Damn, how old are you? 12?

[@happyh2o]

i don't watch car stuff (just popped up on home page) but your enthusiasm is sort of infectious so i guess i will probably be watching a lot more!

[@LorandHungary]

KZbin just stopped recommending me your videos and completely forgot you existed. This was back when you compared the golf R with i think your lambo at the time. Great to be back, got a lot to binge watch.

[@Verdekiwi]

love this serie. Interesting how you keep saying "i'm not mechanic" but apparently you're doing a better job of whoever mess it up previously

[@joseLopez-jb7yf]

I can't imagine working on my dream car but the best part is that it's with your dad ,,,,,that is priceless,,,,,,,not many people will ever be able to do that ,,,,,keep up the good work

[@CanadianOnlooker]

Prime example that engine builder matters, no matter what kind of car/ engine

[@JuanRodriguez-vw3sf]

I would love to see you rebuild the car in full please post the whole rebuild and would love to see you driving it

[@whateverrrrrr123]

Yours is my favorite car salvage channel, why? 1. Mat !!! 2. The Cars!!! 3. I drive on the left (Malaysia)!!!!

[@harryevans4103]

Hi Matt, I popped in last Saturday, so great to meet you and see the shop keep up the work. What a build !!!

[@TheTruthfulOnes]

I literally just found your channel and so far I love it. The man who built the engine makes my blood boil. How can you so careless with such a priceless machine. It’s unbelievable. If I have one thing to ask of you as a new subscriber, please don’t take 53 months to finish the build.

[@joken8901]

the bloke who rebuilt the engine knew exactly what he was doing .... getting his own back on the company well its got a lot of new parts just look out for the red herrings he left go through everything

[@richardphillips4198]

I’ve only recently discovered your channel (via rattarossa) Love the Lambo videos so far. I actually nearly drove this car at Everyman racing in 2011, I still have my photos of it. I really wanted to drive this Murci, but a yellow Gallardo spider was available first so I drove that. I remember the instructor saying at the time that the Gallardo was much better to drive than that green Murcielago anyway. Looking forward to following your progress 👍🏻

[@rowensamuel2979]

WoW!! Made me smile to see Taverish aka Freddy... Legend 👏👏👏

[@robsmith4555]

Love it mate! My old man thought me everything about cars as a kid and I’ll always tinker and do jobs on my motor. 👍