Rebuilding Hubs/ Modifying Shifters/ Fixing Interior 1990 Toyota Pickup

[@jakewashburn4426]

You just showed how easy it was to take apart the shifters and an old Toyota pick up well that just shows how great all their trucks are specially Toyotas how easy it is to take apart stuff like the dash and other things that’s why I love older vehicles especially older Tacoma‘s and Toyota pick ups

[@TheDesertRat31]

Right on. I'd love to find a beater and fix it up too. I like the fact that I'd know it inside and out. KZbin and channels like this and also the enthusiast forums (I have a 4 runner and read T4R and T120 a lot) are some terrific positives of the internet. I used to by completely mystified about cars and never considered myself a "car guy" growing up. Now I enjoy keeping them going. Only bummer is when it's your daily driver and you hit a wall.... I hate scrambling to get it together so I go to work. Lol. It's nice not having to stress over an extra project vehicle when you run into issues.

[@ralphmendoza4563]

Another great video, I do have a 1989 toyota 22re , had issue with my injectors, noticed that I had the oem, didn't replace, what I did , I rebuilt them, found parts on EBay, that was the cheaper than we one. Parts only cost me $14.00 and some change. Keep those videos coming.

[@austinniemela]

Thanks man!

[@dogsarebetterproductions]

Great to see a hilux video where someone actually cleans their vehicle. I did the same to my 88 hilux.

[@gurjindersingh199]

You inspired me to get out there and look for a 90s 4 runner. I'm not going to sas swap it or TDI swap it but I will definitely manual swap it and put a 1kzte in it along with fixing all the rust

[@bryanrails3428]

Stoked on this!!! I have 90 Yota SR5 4by xtra cab, 5speed that’s my daily with the 3.slow. Love that truck and have had to keep it rolling myself. I’ll be watching all these vids. Thanks for the content.

[@philgriswold2133]

Thanks for the hub rebuild info. I've seen others, but they try to make it overly complicated. You made it look like anyone could do it.

[@austinniemela]

Oh the hubs are extremely simple and easy to rebuild!!

[@tradeMark182]

Its the work ethics for me .. This is like 3 videos into one . The longer the better! Great job Austin

[@austinniemela]

Thanks man I appreciate it!!

[@jimmadonna1436]

Thanks for having a great channel with cool content!

[@eliasrivero7445]

Todo de 10, pero podrias haber cambiado las tuercas de los cubos magicos.. exelente laburo..

[@bob_frazier]

It never occurred to me to access the antenna from the wheel well. Thanks Austin. Keep up the good work.

[@bryannamba1560]

That dash came out SICK!!! Think I should do that to mine.

[@J.Garden1]

love you vids man! Got 3 hilux 2.4 diesels myself and want to restore 2 of them. And your vids help alot. Keep up the good work (Y)

[@dmitriy8639]

Классный гараж, классные инструменты, а главное твои руки растут из правильного места! Продолжай, врачь пикапов)

[@DaJerryCurlzBoy]

Bro! You have a sweet shop! I’m jelly!

[@austinniemela]

Thanks man! Could always be bigger!!

[@billywilson8385]

I'm glad you found that antenna! I saw it from the other truck build and bought one. The only thing is it catches on everything when wheeling in the woods

[@austinniemela]

Yeah you can get a short antenna for it!

[@suzuki230]

Man this channel needs to take off, it easily deserves like 300,000 subs if not a million as subs grow. Great content

[@austinniemela]

Thanks man! Someday we will get there!!

[@dennisgallear409]

Pretty Cool!

[@vah-mingmoua9599]

Check your fuel pressure regulator for leaks causing hard start.

[@aslakbakke458]

The interior looks nice!

[@ValentinArzola]

Austin. You have any ideas on how to fix the cracks that develop on the dashboards? Let us know please.

[@taco_nate_07]

Love this channel!!!! You made made the shifter look sooo easy to take out! Mine was such a pain! Are the locking hubs easy to turn? Because one is easy to turn and one is hard to turn on my 91 pickup.

[@austinniemela]

Thanks! Yes easy to turn! When they get hard to turn, they need a cleaning and some grease, sometimes a Oring replacement!

[@taco_nate_07]

Thanks! Took them apart and greased them really good so it might be the Oring.

[@samurailt]

youre doin art dude!

[@austinniemela]

Thanks

[@bob_frazier]

Good lesson about buying stock rather than f'ed up re-done.

[@citabria4804]

You could make a video on the TDI like a build timelapse or something

[@berkman7040]

teşekkürler AUSTİN

[@alejandrogodoy559]

Nice job

[@rosswheatley1577]

Well done sir

[@austinbob7291]

this truck would make a great dual used truck a offroad/street truck and love the content man

[@austinniemela]

Thanks man!!

[@mountaineer1438]

Nice 8 point!!!!!!! Good vid! 👍🏻👍🏻👍🏻👍🏻

[@mikediamond257]

Awesome content and well put together. What you’ve done looks awesome !!!

[@austinniemela]

Thanks I appreciate it!

[@mikegalvez2575]

You are a busy bee! Getting ish done man!

[@jakewashburn4426]

Man you’re my favorite truck channel out there and I’m not saying that because I have a Tacoma I’m saying that because I don’t see besides your channel somebody doing builds like you do and if I lived close to you I would love to learn from you specially on how to make that flatbed that you made on your red Toyota pick up I just love that truck to death I was thinking about a flatbed for my 99 Toyota Tacoma pre-runner that’s leveled but sadly I don’t have a welder but I went and bought one but yeah

[@austinniemela]

Awesome!! Thanks for watching! Glad your enjoying the videos

[@tradeMark182]

You might want to chack the rest of Austin family .. savage builders kick ass content !!

[@dannysheppard2882]

Love the videos. I got hurt really bad last week and I been binge watching all your videos. I got a lot of parts to fit 89-95, and if you need a set of shifters I think I got a set I took out of a w56, transmission a while back, great work too bro! Love the truck!

[@dannysheppard2882]

If you need any parts let me know.

[@austinniemela]

Thanks man!! I got these shifts working pretty good!! I’ll see what other parts I need and let you know! Might need some random little interior pieces

[@dannysheppard2882]

No problem bro. Anytime, you do great work. And love the videos.

[@javier4764]

Good job

[@walterflores456]

I have a truck just like this one. Mine is a 91, Do you have any recommendations for a side step, something like a rock slider? Thanks in advance, great work!!!

[@tonymontana6368]

Please keep those old Toyota Tacomas alive and running.

[@armandmuller8551]

👍

[@shannonobrien4729]

Love the videos brother, keep them coming.

[@ThisOldYota]

Looking good and that’s one sexy antenna!

[@austinniemela]

Right! Not all crusty lol

[@MussaKZN]

Hay Austin I’ve got a spare Aussie 22R SR5 dash cluster volts tack oil fuel speedo KMH LoL don’t know if right hand drive fits left HD but I think it would, I know a guy of your expertises could make it work with the V6! Would look better than the DX cluster Let me know if you would like it!!! LOVING THE UTERUS!!

[@PNW_Car_Mods]

Congrats on 30k Austin. I mean we can see the writing on the wall lol.

[@austinniemela]

Thanks a bunch!! Slowly but surely!! 👍👍

[@1994Nic1994]

Does your pickup use the cable drive speedo or the electronic style? I have a cluster of both in which im not going to be using if you're interested in swapping out your old cluster. One was from my 94 4runner (electronic speedo) and the other one i pulled from a 2wd 3rd gen unsure of what year or engine. But its a cable drive setup. Also have an old sr5 shifter from my 4runner or i also have an sr5 shifter from a 1st gen toyota. Just unsure how to get you some photos. But im about an hour and a half from spokane. But i do frequently come up that way to pull and save. Im located in Potlatch Id.

[@austinniemela]

This is a cable speedo! I thought about swapping to a tach cluster

[@1994Nic1994]

@@austinniemela well i do have a tach cluster sitting around if youd like to have a look at it to see if it will work for your pickup. Although i do remember reading a forum on it something to do with the oil pressure sensor if you dont have the correct one on the engine itll kill the oil gauge in the cluster but im not 100% on that. I read it a few years ago. Was going to do the same thing for his pcikup but he didnt sound to interested in swapping it over so i stopped reading into it

[@azrooster602]

Austin where you buy all parts ? thank you .

[@luiscruz-no3ib]

Clamp the return fuel line if noise goes away you have a bad regulator

[@NuttyNu]

Look good! I didn’t see you raise the spring onto the clutch pawl, hopefully you did.

[@magnusmalmlund2982]

Thumbs up 👍

[@Eli6.7]

👍🏼

[@sasha3475]

Круті відео мало слів і багато роботи клас👍👍👍👍👍👍

[@rickycumbee8608]

Hey do you have the part number and place to get the screw inserts in the dash? The plastic inserts have completely dry rotted and my glove box hangs when I open it.

[@gonzalosanchez6387]

Previous owner: oh nice! That was my truck. This should be fun **Watches video** Previous owner: oh

[@austinniemela]

😂😂

[@jduncan8907]

** videos** 😂😂 I'm starting to wonder if this truck came from the guy I bought my house from.

[@Mendozabmx]

Hey man quick question (if you can as anso) what would be better year of yota to buy 89-95 or 95-98 for power wise & Reliable

[@austinniemela]

Both are a great choice! I would swing towards a 96-98 with the 3.4L

[@ryanrussell8255]

Why would they mess with the shifters?

[@austinniemela]

Extended them for a body lift!

[@gregh7457]

I'de put in used toyota injectors before i'de put in "new" chinazone amazon/ebay injectors.

[@Jfeo79]

Yodagang on ig carries alot of parts

[@realaussiemale567]

This white truck is turning in to a bigger re-build than the red truck. Which isn’t a bad thing if your intention is to re-sell it.

[@stanislavshubin3447]

+

[@permanentparadise9673]

I’m going to attempt a 1kz-te conversion from 3L, does anyone following know where I can grab some engine mount brackets I know the motor mounts have to be moved 40mm (1.5inch) backwards, any help would be great! Cheers from Australia

[@MussaKZN]

I would think Toyota would still have NEW mounts available!! Ooooo you want the chassis brackets!!

[@MussaKZN]

Where are ya

[@permanentparadise9673]

Sydney my man and yourself ?

[@MussaKZN]

@@permanentparadise9673 The lockdown state Capital! Melbourne Big job 1KZ-te swap expensive too!!

[@permanentparadise9673]

Expensive and time consuming yes, but think about all the fun afterwards 😎

[@doughboy1966]

NuttyNu just posted a video on injectors watch his video kzbin.info/www/bejne/jmrQYZ59ft57mJY

[@princenoah21]

8:46 Wait. I thought this truck didn't have AC? If that's true, why is there an AC button on the climate control?

[@gerby1818]

I hope the guy you got this truck from doesn't watch these videos. You bash him in every one so far 🤣

[@garethl.2123]

Man. It would have been better if the previous owner never did any work at all. Brutal

[@austinniemela]

Hah tell me about it!!

[@wrmathis2]

Nooooo u didn’t paint the dials back to red. 😭

[@austinniemela]

Grey is more better!!

[@wrmathis2]

@@austinniemela but red screams toyota

[@austinniemela]

@@wrmathis2 to be fair I just didn’t have any red paint haha

[@wrmathis2]

@@austinniemela good reason

[@genel.8582]

Hey I want to do the same swap im in Spokane I would like to ask some questions

[@austinniemela]

Yeah what’s up?

[@seopyang1556]

Hey friend Would you like to make a review video of BougeRV Heated Seat Cushion? Please feel free to contact me.

[@adventurousairman]

I like your attention to details, and well your Hot 😉

[@austinniemela]

😊

[@winnie2498]

Hey friend Would you like to make a review video of BougeRV Heated Seat Cushion? l have emailed u the details. Please feel free to contact me.

[@realaussiemale567]

Important lesson for any vehicle. DO NOT buy & use cheap Chinese knock off parts! Unless you have a Chinese vehicle.

[@ninobrown5524]

Why you yelling bro

[@bob_frazier]

So us old people can hear him!

[@postelmanshugues5133]

👍