Rebuilding our Mustang GT parts car with the help of another parts car.

[@nicodenhaak3961]

5 gallons of salvage fuel. The build is already paying for itself! Best way of disposal, is just burning it in the trusty Pontiac. I'm sure it doesn't mind. Love the channel, cheers from the Netherlands.

[@poorboyman5565]

Scott reusing that old gas is not being cheap is not being wasteful. Love your channel.

[@vehcor]

A better environmental impact than any government programs will provide! 😂

[@Twolife]

Never thought I would have watched someone cut up a car and put it back together again... but here I am... awesome!

[@ShainAndrews]

Let's not get ahead of ourselves... Nothing is put back together yet.

[@jhonditch4269]

@@ShainAndrews even Scot is ever quite sure IF it is really done

[@ShainAndrews]

@@jhonditch4269 Exactly!

[@vehcor]

I never thought anyone would watch either. Had I known I would have recorded the work I did 25 years ago. That was much more impressive compared to this easy stuff. I’m too old, and maybe wise to work like that anymore. 😂

[@gerry-p9x]

Problem here is MR SPOTTY HAS NOT MADE AN APPEARANCE THIS EP.....he wood have consulted prior to move to prevent it....

[@middletownmookie1904]

I am really enjoying this Mustang build two-fer. Keep it up! I’m glad to see you continuing somehow someway.

[@vehcor]

Thanks for the support and understanding. Trust me, I am working hard at getting back to a "normal" or better!

[@raymondhorvatin1050]

Scott your videos are fascinating thanks for sharing

[@vehcor]

Glad you like them!

[@floydhelms44]

.....Mr. Spotty has gone wild ever sence the fire. Great video Scott.

[@vehcor]

He’s a loose cannon!

[@LAactor]

Spotty was the one who set it......

[@johnmehaffey9953]

Absolutely love the way you squint your eyes instead of wearing eye protection (glasses)😊 that’s exactly what I did when working in construction, yep health and safety was always complaining about me😊

[@vehcor]

Ummm, those are OSHA approved safety squints. 😂

[@d.dolphinstriker5737]

Nice work again. I really respect the people who are good with metal fabrication 👌

[@Happyguy-c6j]

You're an absolute master, Scott!! Great content, as always!!

[@earthwindflier]

It's not being "cheap" Scott. It's "thrifty"!

[@jarleron4788]

or Frugal...

[@christianheidt5733]

& most importantly, good for the environment just to use it!!!

[@vehcor]

Cheap, thrifty, frugal, whatever! Free gas is free gas! 😂

[@gerry-p9x]

Cost effective

[@lstone.09]

Wouldn't shock me if Scott had mustangs stashed all over the country just to be able to keep working on them. Awesome video Scott. 🚗🚗🚗

[@gtoger]

Cavalier wagon? Toolboxes for days? More thrashing on old Fords? What's not to love!?!

[@SuperM1687]

You're inspiring me to actually work on my two 1987 GT T-top cars!

[@vehcor]

Get to work, when I run out of motivation, I’m coming to you! 😂

[@JasonMcCord-qk3yb]

@@vehcorHaha! Nice! Rare cars. Last year for the T-Tops, too.

[@79DJB]

Great work again. Glad you've got a work space post fire.

[@JasonMcCord-qk3yb]

lol the gas! Haha! I’m not making fun of you, Scott! “Game recognizes Game”. I do the exact same thing, myself! For me, it usually goes into my 2003 ‘Flex-Fuel’ S-10!!! If I suspect it is really bad, I’ll put a bit of ‘Sta-bil’ in with it. Most people believe it only protects the fuel when in storage… It also conditions and restores fuel as well. Being a body man for many years, one of my favorite “Hacks” was to take an old butter knife (just make sure it is a solid One-Piece unit, with no plastic, or wood, whatsoever. Basically, you just grind it down until the blade is thin, then put a razor-blade like edge on it. Slides right under trim and moldings like it’s nothing, most times. Keep up the great work Scott!

[@rbc5878]

I thought for a moment you were about to throw that minimal rusty quarter in the pile!😂

[@ast6537]

A friend of mine was in his Motorhome (RV) for you boy's across the pond 😁 He was travelling thru France and rang me because he'd put 5 gallon of petrol in his diesel motor, I said go back in the gas station and buy the cheapest gallon of engine oil they've got and put it in the tank, might smoke a bit at first 😂😂 and then keep topping it up with diesel every chance you get...worked a treat 😉 👍

[@billbowers268]

Hey Scott this video answered my question . You still have the parts car . Great Scottie !

[@scofab]

Always fun, thanks again.

[@trappedinkalifornee]

You are whittling that thing down nicely!👍🏼👍🏼

[@vehcor]

Thanks 👍

[@paulmcmain1760]

Good progress

[@glenharper3136]

Thanks for the video Scott.

[@ManMountainMetals]

Looking good 👍 hope your back holds up moving that stuff around. Remember, knees straight, back bent, and lift in a sharp, jerking motion 😎

[@JasonMcCord-qk3yb]

I like seeing you use a 4 cylinder donor car. People often forget that they are exactly the same car (Body/Unibody-wise) under all the ground effects, taillights, etc. Camaro/Firebird, most trucks (Inside their weight class, anyway) and so many other vehicles. As such, I can usually get a good non-running 4-cylinder Fox-body for around $400. In comparison, in order to pay that little for a 5.0 Fox-Body Mustang, it would have to have been run over by an Abrams tank, until it was completely flat, set on fire, then cut up into 4 equal parts…. And they would STILL probably want more than $1,000 for it.

[@mikesawyer4707]

Just a little wiggle and tap. I love it. 😃

[@garyashdown5376]

So good to see your tools are not rusty, i suppose you keep them clean using internet trolls tears 😊. I hope you have some luck in locating a new shop soon as i hear the pizza sales are down 😅. Gary 🇬🇧🇬🇧

[@DavidHollis-w3w]

Scott’s OSHA Emporium is kickin it Old School 🎉😂!!

[@tommy98271]

Hooray! I was worried we wouldn’t get a “Bitch Mittens” reference. You should sell those, I’d buy some.

[@aaadamt964]

I explained that term to my grandma several years ago. She traced my hand and made a pair for me. It was hilarious. Haha

[@alextipple8650]

great job

[@Purplegt22]

This video was awesome!!! I have been binge watching all of your videos. Keep up the awesome work brother.

[@keithsutherland9800]

Yet another brilliant video, and showing in great depth the way you take it apart, ready to make assembly easier,,, I hope you find a workshop soon Scott, ( or manage to do a video on building a workshop at home)

[@douglasrichardson8525]

Great work and Regards Doug. UK

[@jimwiskus8862]

Dr Scott continues to operate. Soon there will be a pulse. 😊

[@BBDragon66]

Who knew you would find Narnia's back door?

[@Jesselovespinball]

“We’ll send help immediately Mrs. Fletcher !!!!” 😂😂😂😂)

[@vehcor]

You must be Gen X that had to watch that commercial daily. 😂

[@ctbhaley]

It could be argued that Scott already has a Mustang emporium. It's too bad the supervisor won't get on his ass to finish the Custom Coyote Classic. Feel free to steal the name. lol

[@clintonepps3666]

Maybe he sold the coyote mustang to b is build channel or other youtuber as he does have a few cars in the toy box that need rebuilds

[@miker252]

I did the same, with the gas that smelled like turpentine form my Toyota Motorhome's auxiliary tank. I strained it through cheese cloth and mixed it into my Isuzu's tank. It ran fine.

[@emgriffiths9743]

I remember a job I had where I spent most of the day drilling out spot welds, had 3 drills as they would get really hot after a while

[@vehcor]

That is why I use electric, my compressor can’t keep up. 😂

[@peterparsons7141]

Reduce, reuse, recycle, Frugal, environmentally friendly. Growing up we recycled, reused everything mostly because we had to and later on it’s just the way it’s done.

[@a.c.m.e.ink.4568]

Scott, how dare you clone a GT with LX parts !! 😂 Greta, we are saving the planet. While not compromising on style!!

[@vehcor]

4 cylinder LX no less! 😂

[@brucenichols9206]

I worked at junkyard for six years early 2000's coworker had a retired Bell telephone van a 66 Dodge A100 he drove it for over fifteen years and over 100k miles he tacked on.. paid less than 50 at the pumps while it was on the road .. He kept two 30 gallon barrels full in his shed at home .. The greener the fuel the better that old slant six ran

[@anthonybollini]

The land of old parts and rust!

[@Snowmannorth]

Well Scott, it appears you found a place to work again. I was looking forward to you telling us more about that. I thoroughly enjoy all of your content! Keep on keepin on! Don’t worry about the “bitch mittens”… we all use them once in a while 😀. As I watched further, you explained - thanks 😬

[@bernardquasaar1254]

Make sure you do the safety squint when you do metal drilling

[@bearing_aficionado]

Happy Friday, Scott!🍻

[@vehcor]

Same to you! You got beat by the bots and some real people this week! 😂

[@bearing_aficionado]

@vehcor yeah I was ready but then forgot.🤣

[@richardthomas1743]

HEY! Good afternoon Scott!

[@vehcor]

Good afternoon, or evening rather. I’ve been busy slacking! 😂

[@TripodsGarage]

I am still waiting on “Bitch Mittens” merch to buy 😂. I would proudly wear those 👍

[@vehcor]

It's on my "to do" list... near the bottom and the list is long, but it is on the list! 🤣

[@formulafordisaster7609]

Nice mittens

[@drivecam101]

Dilution and use is the best way to get rid of old gas. Either in a beater car or the lawn mower.

[@vehcor]

My other beater car is a lawnmower! 😂

[@Unclejake]

Is Mr Spotty hanging out with Towlie?

[@kleemanjad]

Sema build.. PILeee

[@Dustin_the_wind]

It isn't being cheap, it's being intelligent; but I get why you say that. You can quench the heat in a sawzall blade to make them last longer. I get good mileage out of blades. You almost threw that quarter panel into the pile, I saw that. Thanks, Scott.

[@houseofno]

Well you certainly know how to choose quality. Seriously. By the late 80's and early 90's, Ford had largely sorted out the aging Fox Body Mustang. With a fourteen year production run, it had one of the longest production runs of any American passenger car.

[@vehcor]

I just pick the ones with the best resale. 😂

[@amandastyles-uh6zx]

Shoot ida just put the front off the wrecked rear one and done that but this makes for a much more interesting video 😁👍

[@mikechiodetti4482]

There's a lot of sheet metal parts in the back end. I hope you have a great memory for reassembly. I'd be spending lot of time taking pictures and numbering them so I'd know how this vehicle goes back together. Oh ya. You're just "recycling" the gas and "purposing" it in the red car! Simple! On to the next video. "It's gonna be Great!"

[@dougeaton2446]

Ooo what's that old wagon covered in the back??

[@vehcor]

1982 Malibu classic... with the drivetrain from an 86 Corvette. I built it 30 years ago before fuel injection swaps were cool. I will make a video when it finds a new home.

[@dougeaton2446]

@vehcor please do I love those box Chevys I had 1 simular when I was in high-school. But it was an old 327 in it. But it was a tan 79. Went good miss that old girl lol

[@Zewestcoaster]

If you paint your assault can opener scary black and affix some even scarier sights to help aim that thing, that'll be sure to garner some (unwanted) attention....

[@MrNeverseeme]

If you watch Menace to Society, Scott was the guy selling Kane the Mustang, he had hair back then. lol

[@ulisesjimenez6045]

What type and brand of 2 sided tape do you recommend to reinstall side moldings

[@aaadamt964]

3m is the only one I've found that works.

[@richardbrown2447]

I have some serious concerns. Scott with PPE .Gloves, Ear Protection and Safety Glasses. Whats the world coming to. 😊😊😊

[@vehcor]

Next I’ll be wearing a hard hat and high vis vest! 😂

[@guerro327]

Man, you are flush with 90's mustang convertibles lol

[@vehcor]

Got a few 80s as well. 😂

[@whatsoutthere6822]

Believe it or not, I pulled trim off my Impala to replace and I used peanut butter to remove the old tape from the molding. I spread it on and let it set overnight and it came off easily.

[@JR-bj3uf]

it's all that peanut oil in the peanut butter. Perfect solution and the mice will love you.

[@vehcor]

You left out the most important detail, how did the moulding taste with the peanut butter? 😂

[@ralphrandolph2475]

This is my first time dropping in since the fire. Is this a new video, or a rerun from a while ago?

[@clintonepps3666]

Is this black mustang the 1 you were waiting to get a title for when the workshop had its office fire

[@anthonybollini]

Dearborn Rust!

[@alansmith4734]

Parts Car + Parts Car = Salvage Yard

[@vehcor]

Emporium 😂

[@kenmurray4232]

Nice job. Not sure about the new guy with B*tch mittens. Mr Spotty needs to step away from the spray cans & pay attention to his job. Looking forward to the next one going back together. I think it will be better than Ford did.

[@radrcer]

A friend in highschool had a 88 gt. Black with a red stripe. He destroyed the transmission. 25 years ago. Pretty sure its still on blocks in barn. Weird how life treats ya.

[@gregsheffer912]

what happened to your early model mustang coyote swap?

[@JROCandROLL]

Is this a new video in a new shop? Or older one lol.

[@johnthiel7422]

So you had a plan long in the making?

[@vehcor]

I always have a plan, sometimes you have to adapt but I always start with a plan!

[@465maltbie]

How do you get the double sided tape residue off of the back of the moldings? Charles

[@aaadamt964]

I can't speak for him but I use adhesive remover and a plastic scraper.

[@futhermuckerson]

Happy Gilmore😂

[@vehcor]

Taparooo!

[@andrewbetschman3175]

@vehcor I hope you are a great weekend!

[@vehcor]

You too!

[@philtucker6449]

Is that a Malibu wagon??😀😀

[@vehcor]

It is, with an L98 and 700R4 out of an 86 Vette. I built it 30 years ago. I’ll finish it someday but I bet it will start right up after sitting for 10 years.

[@philtucker6449]

@@vehcor building wagons before they were cool. Nice!!!

[@goclunker]

Fill up the rest of the grand am with premium and it will mix and turn into at least 81 lol

[@vehcor]

Look at Richie Rich over here with his premium. 😂

[@goclunker]

@@vehcor its 91 or ping ping, not ping pong 🫢

[@boelensds]

you got to have the drilling face.

[@donfolk6335]

Isn't that torch method the way your other shop burned dpwn

[@chrislongbeard]

The carburetated 318 in my Dodge pickup loves recycled fuel. I use pantyhose to strain my fluids. Just don't ask me where they came from.

[@megadouche7030]

Does Mr. Spotty like to heat it up from the backside?

[@OUSWKR]

Scott keeps doing these fox bodies as if he wants to avoid the project that shall not be named 😂 how much do yall want to bet after the fox body he goes back to either a Silverado or grand am build?

[@ditherdather]

With gas prices these days, that's not being cheap. That's being wise.

[@tommcl8548]

👊👍

[@vehcor]

👍🏻

[@jefnf]

hey scott... didn't you have another mustang to work on???

[@citizaniac149]

I think the white one was in the background.

[@vehcor]

A few, will they ever get done?… the world may never know!

[@jefnf]

​@@vehcorwell I think you should do another vid working on it just so the new members can harrass you about it.

[@jefnf]

​@@citizaniac149I did see another car back there. But I thought it was a car I saw a few years ago. It looked kinda like a Fairmont wagon. I wonder what significance that car had??

[@citizaniac149]

@@vehcor I would guess you have some time now for old abandoned projects 😉

[@BigBisalreadytaken]

My original garage? The one that burned?

[@Paulster2]

But Scott, at Ford, "quality" is job one ... which one I don't know, but one of them. I think it gets forgotten, though.

[@GhettoWagon]

9mm for real? Think I never used that 9mm in my set. Ever

[@TJBrouwer]

They also like to use the 7mm hex bit on the brakes. The one that does NOT come in any set...

[@vehcor]

For decided since they paid for the entire set of sockets, they are going to use the entire set of sockets! 😂

[@GhettoWagon]

@@vehcor I never use the 16mm either hardly.. I found 2 bolts on my Old Chevy that were 16. The transmission mount and the belt tensioner

[@vehcor]

Don’t worry Ford used a 16mm on those bumper shock bolts! 😂 They really did use the entire set on this car!

[@GhettoWagon]

@@vehcor Yea I never liked ford anything. Even Crown Vics are weird. I stick to Chevy V8 powered things or Toyota's are cool

[@johnmurphy6366]

So,the real reason you buy parts cars,for fueling the beater!!Or,is this an Illinois thing?In NY,we just siphon off the tank!

[@BrucePierson]

A parts car to fix a parts car to make it a not parts car!

[@vehcor]

Parts carception

[@michaelhartloff3833]

Wassup

[@vehcor]

👋🏻

[@collyoung6017]

Holts Dum - Dum new there is a product I ain't come across since the 1960's - You must be older than you look man !!!

[@vehcor]

I’m always older than everyone thinks I am. 😂 If I put on a hat, people are usually off by 20 years!

[@jhonditch4269]

because you never know IF you have room to store all those parts

[@billhayes8526]

Mr. Spotty and his drug habit, I thought he was in remission...

[@goptools]

The parts car didn't seem to have must rust for an Illinois car. Was it a foreigner? II think a Scott's Mustang Emporium is a great idea. Come out of the closet and embrace your inner Ford lover!

[@tommy98271]

Honestly, I’ve been a foxbody project nerd for 30 years, no one, no one, does Better detailed “how to” videos on them than you.

[@BrucePierson]

Old gas has a rather nasty smell!

[@vehcor]

The beater Grand Am doesn’t mind!

[@PhilemonVic-o5i]

Hernandez Matthew Lee Anna Thompson Carol

[@next0845]

28:04 You are getting soft 😂😂😂😂 Excellent job, as ever! Edited…. I take it back after the flame and petrol tank unattended (that’s more like it) 😎

[@LouJustlou]

Do you tell the real parts car what its future is? More humane that way. 😊

[@larrymoore2792]

Please let us that you either have a new shop or at least a place to work on your projects.