Recharge freon in a Thermo King Reefer unit

Recharge a Reefer unit

[@derrickenbuenosaires]

I admire the guy trying to help the others, I'm sure he was getting paid but there was no way his students were comprehending what he was talking about. If you have to explain that the blue hose goes on the big pipe and red hose on the little pipe then they shouldn't even be touching a reefer. They need to go back to refrigeration basics and understand where to connect and what each component is in the circuit. They are too green for this machine. Funny to watch though.

[@alfausterdem]

Great! Good explanation. Greetings from Tampico Tamaulipas

[@goldygill7297]

Thank you so much Ricardo 🙏🏻 we appreciate it

[@zomo707]

Does the Unit have to be running to re-charge?

[@dailygrindism]

This is incredible.

[@baleriotorres6160]

The guy said blue to low pressure and red to high pressure, and connect to where the bubbles are when you need to vacuum the system. The guy know his job just can't explain it right and people who don't know how to work in reefers unit such as thermoking or carrier will have an even harder time understanding anything. The Freon R404a for these units can be loaded both gas or liquid, just load it slow and with an scale. it's always better to vacuum the system and load the right amount of Freon to get a more efficient operation.

[@jonathanmembreno1325]

Any video to learn about it ?

[@inoahmann7542]

@@jonathanmembreno1325 not really. It's easy though. Thermo king has instructions in the operators manual. Basically get the box to around 0⁰f and add refrigerant until the ball in the sight glass is a bit over half way.

[@asaprotrans3889]

In which shop u working in am hiring

[@c.a.mcneil7599]

Wait this is not about fixing just to recharge get load off. Do you understand that. That’s shit happens. If yourr low on Freon you have issues for sure. You make no sense.

[@usaapps2155]

Hello guys, where can I buy gauges like these and how much does a thermoking sb210+take?

[@Adoken101]

All you need is recharge, make sure to push release air output to clear out air vacuum on the gauges. Which locate in the middle of the gauge between blue and red. Put like 2 pounds of freon. You 👍 good. 😂. Other than thats you have leak somewhere. Also for safety wear PPE. Grove and safety glasses..

[@abcdifg4]

God bless you

[@aaronsanchez2646]

Take it to the pros most stuff he is saying is wrong...by the way if u have a breakdown good luck with the insurance...insurance wants certified professionals working on these high quality rigs.I have 18 yrs experience working on all these reefer unit plus you can get Seriously injured.....seen it too many times....you making big money take care of your equipment and it will take care of you. Take care blessings to all.

[@xxkillaops]

He has no idea what he’s talking about

[@aliqtr7495]

Good mechnic

[@oidodsonidosonido2754]

hi there is is this place how can i get intouch with the mechanic??

[@tim8967ross]

Sure is reeferworks.thinkific.com

[@ajsingh4406]

This guy doesn't know much. Better go to the experts.

[@c.a.mcneil7599]

Yes and we see you know less than most. It’s recharge not repair. Any idiot knows the Freon doesn’t disappear unless compromised system. Duh

[@rabianarula5516]

Hi ...neee Reefer Mechanic at Tallahassee Florida urgently right now. Its holiday so unable to connect

[@rickblaga9287]

Please help, SB 330 - SR3 - holds 32 degrees PERFECT, but when I set to 33* it always holds it around 35 to 37 degrees

[@raymondreiff8170]

It's is programmed like that if it weren't your load would most likely freeze on top or in the front depending if you have a produce shoot installed or not, You can set it different if you have to have it maintain 33 only, But it will stop and start alot unless you're running it on Continuous, Then it probably will.

[@iPhoneBlaga]

@@raymondreiff8170 yeah man, I’m running on continuous, and when it’s set at 33 or 34 or 35 it always seems to run about 2 to 4 degrees higher than what it’s set at for Continuous

[@supamild808]

What de blue gauge for? Hook up de blue hose, put tank upside down, open dis and charge. Watch de ball float all de way up.Oh, sorry U got problems. Haha, too funny

[@opdogg1000]

LMAO

[@Dewey_Boondye420]

thermoking charged me $1000 to do this..

[@vicentelopezlopez3109]

He needs to get an EPA license first before i tell the EPA.

[@YouTubeofficialtechnician]

Any problem iam solve

[@logisticsandcrypto]

If Don't know what kind of gage it is,don't try to do this job,it will kill you.

[@derkzerlersky9477]

This hurts the trade

[@nickpa8871]

100 % agree .

[@tnt666tnt]

Then these clowns will call me because they fucked their unit up.

[@usdpaulp]

@@tnt666tnt what did they do wrong? I followed what they did and my reefer is running fine.

[@redtoyz02]

@@usdpaulp just haters

[@QuintinScheffer]

Always charge 404 liquid.

[@janleypedrera8888]

depends the compressor recommended refrigerant...T series charge R134A

[@nickpa8871]

@@janleypedrera8888 he's talking about 404 is he ?

[@jamessmith-bw4nb]

All 400 series refrigerants are blended. They have to be charged as a liquid or the refregerant fragnate.

[@nickr7739]

Sorry stuff hope they find knowledge

[@YouTubeofficialtechnician]

Hi iam technician any question

[@usaapps2155]

Hello, where can I buy gauges like these? And how much refrigerator does a thermoking sb210+ take?

[@jaizchauhaan]

Confusing the shit out

[@eddieennisbaysal27]

to much missing info on this clip like how to open valve which valve to open when to open how to bleed system which way to valve turns clock or counter clockwise half asss questions and half ass answers disregard that if possible dont try to think add freeon based on he is talking about if u think driving car is all about steering wheel he is right

[@patricioaguayo9088]

Its not out of this world. I've notice that reefer work is very hidden from anyone. Why,don't know. But its very easy once you get hands on. It was limited to me at thermo king,but I've learned lots by myself. I have seen the worry of a driver owner operator and the smile after saving his load of frozen pizzas. I do road side with a partner of mine. I might be able to answer some questions to anyone and no I will not charge you.

[@usaapps2155]

@@patricioaguayo9088 hello, where can I buy gauges like these?

[@Gamingpadhdhsg]

IT TAKES HOURS TO RECH.??? DUDE I RECH. 28LB IN 15 MIN

[@gabrielolivares8135]

alv.....

[@hectorruiz3915]

your intention is good but as a technician you know that it is handled high pressure and it is a diesel machine. therefore accidents that can happen to those who do what they see is your responsibility

[@timross8941]

Reeferworks.thinkific.com

[@Halfstep2024]

It’s no more his responsibility than it would be whoever taught you if you fucked something up. The only legit reason nobody shares this information is because these mechanics want to charge $250 an hour with a 2 hour minimum just to throw some fuckin Freon in a unit.

[@aboubacarkone1611]

Alarm 37 termoking

[@pudamn]

If you need a video to show you how, you need to take it to someone who knows how

[@skyaseman5561]

I'm so so so sorry for u guy's. This guy knows nothing about how he most use and read 4 ways manifold gauge. Quick lessen. This gauge is for A/C unit's. U can use 2 way gauge . 2nd. If u want to take hi side prussure is better use compressor liquid service valve instead reciver. 3rd. Who told u high side prussure most be about 300 to 350 psi ??? And 400 psi could be sighn of problem. In last if u look at the refrigerant label on front u . can see this unit most be charge by R404a gas. This gas isn't freon. R404A is a HFC blend,

[@noneofthisisreal75]

I think I just got dumber after watching this video

[@chrisnottingham1943]

This is incorrect. Charge the unit this way and you will be spending $6000.00 on a compressor in no time

[@dreamon220]

wtf

[@timross8941]

Reeferworks.thinkific.com

[@jasminnachu1951]

I think the voice, Indian

[@RB-kg3ru]

Spanish lol

[@richclio172]

Teaching them and he ain't got a fucking clue, fit ya lines right you won't keep pissing gas out! Useless, shouldn't be topping a system full stop. By the way I'm a thermo king cert tech!

[@joeysours837]

Good afternoon Richard. I am looking for some help on a thermo king unit model num we mdII-50. I'm having cooling issues with it and I don't know where to start. I've never worked on one. I am an hvac/hvacr tech fully licensed but a close friend of mines went down and he wanted me to try and fix it. I just have a few questions about the system. If you can or have time maybe you could answer them for me. Thank you and have a great day sir.

[@nizar5177]

I think people from India

[@ngoynkulu5169]

These are people who are clearly trying to avoid paying money to the qualified technicians because they think it's quite an easy job seemingly. They keep on asking really stupid questions, clearly they have no much idea of how réfrigération system works.