RECONSTRUCTING AN ABANDONED PEUGEOT: The Rebuild Begins

[@realjiver2]

Before you swop the ABS pump. Check power & ground to the sensor. Then do a resistance test on the sensor.

[@peterpaliwoda1527]

You deserve the “ mechanics gold medal for perseverance and tenacity “ I will say a prayer to the saint of lost courses for you tonight ….happy new year 2023 …good luck Peter P

[@willjones4379]

I had a golf with loads of warning lights. Hadn't been used in 6 months. Drove it down the road after a jump start All codes cleared. Try driving it around the yard

[@RevivingSalvage]

I'm going to try that is sounds like it could actually work 🤔 Merry Christmas 🎅 🎄

[@willjones4379]

Merry Christmas to you to mate. Enjoyed the video

[@philipcullen4300]

Bumper has transformed it, going to a great summer car for someone,,,, merry Christmas

[@RevivingSalvage]

Yeah totally agree its good to be a good car thanks for watching 👀 merry Christmas 🎅 🎄

[@danielsellers8538]

Glad your back know let’s get the numbers up for you als recommend a car an suitcase generator but to be honest the one you have his a good one

[@lyndonhudspeth4915]

Nadolig Llawen fella🎄 keep up the good work,look forward to your updates 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@ianmckillop5608]

Try looking at a local PDR guy for the dent on the back quarter. May be cheaper than a body shop.

[@paultaylor9652]

Turning out to be not a bad car with a bit more care, Merry Christmas to you and your family

[@leemilan5693]

great video, its a hard one but i'm sure you will fix in the end.

[@davidadams3166]

Have you checked the wiring on the fluid level connector block?

[@hammerwell0868]

Happy Crimbo and all the best for 2023 to you and your family . 🎉🎈

[@pifandrei5743]

This is nice. I got to change the back discs and bearings for a 307. Will peak at your video for some bits .

[@diydetail8916]

well done for keeping up with it, don't but another peugeot Merry Christmas!

[@RevivingSalvage]

Lol merry Christmas 🎅 🎄

[@danielsellers8538]

To hit the figure we need more videos bud

[@sagas070707]

It might be silly but have you try a contact cleaner to clean the sensor? If they get moist and that car was really moisted it may be that the contact got a little rusty. That 307 is coming out beautiful. Great job.

[@Taz6688]

Just fitting the bumper made such a difference, it's a car again. Do you not have a multimeter, the only thing I can think of is a proper fault-finding, has the sensor got power, is it passing the signal to the ECU/BSI unit, the ECU is exposed should it have a cover, looks like water/dampness could go through the connectors, you checked the fusebox, but there was no checking the fuses shown, unless you have a certain issue you will need to trace the circuits, best of luck hope you find the problem and solution.

[@whatsdavedone104]

Abs issue....was it the pump or module that was original fault? Use your old module but switch the pump section over or vice versa 🤷 my pump was bad on mk5 golf, instead of changing module and pump I just changed the pump...changing the module ment that it would then need coded to the ecu

[@mr.nice.b]

Subs going up well deserved merry Christmas

[@balbirsingh8313]

Stick a new battery as could be issue with voltage course the faults and could you just not swap the fog lights bulbs rather than the complete fog lights. But nice video and ur may want to invest in a diesel heater.

[@M.R.C.]

The car is looking good now, that bumper has improved it a lot. Can't help with the brake issue, but have a great Christmas!

[@paulorchard7335]

Hi pal when I had an abs pump fitted to my Leon fr it needed coding , it was the same part number was the same too

[@ianevans3619]

Excellent video, the car is looking much better. Have a lovely Xmas 🎄

[@andrewnewton5893]

Hopefully I win lol great video bumpers definitely made car 1000% better

[@stuartdavison8459]

That peugeot is Coming along nicely love your videos and content have a great Christmas 🎄 😀 👍 see you in 2023 👍

[@iankane2847]

Hope you get it sorted soon, have you thought about a small diesel heater to keep you warm, hope you and the family have great Xmas.

[@misu377]

Salut , am avut și eu probleme la Peugeot 207 cu pompa de ABS mai exact cu ESP senzor presiune din pompa și nu am găsit codul piesei pe nicăieri , dacă partea electronica la tine este buna restul se potrivește de golf 5 perfect este același model eu așa am făcut și merge perfect și acum se desface foarte ușor de pe partea electronica are 3 șuruburi , asta dacă nu găsești pe codul tău , am montat doua sh de Peugeot și au avut aceeași prob , acum totul ok

[@joshuaworton291]

The car is coming along nicely now, have you tried disconnecting the battery for a bit and then reconnecting as sometimes a hard stored fault won’t clear even with a scan tool, it’s probably that the replacement abs pump needs to be coded though

[@eltonressouw9569]

Merry christmas & Happy new year.

[@ih9017]

Great Sunday contents again 😉 Merry Xmas to you and the family 😉

[@kylemorris681]

Hope it helps I had a few issue like this and it was the bsm under bonnet fuse box there a lot on forums about it pins rust out happy Christmas

[@Mudster250]

Can you measure the resistance of the sensor and see if it changes with level? Could also be a wiring break (or bad connection) in the sensor circuit.

[@michaelstevens7533]

You'll get there with this car 🚗 bud

[@jonathanbyrne9013]

It may not be any fault .. The car may just have to be driving for a bit an fault may clear .. Worth a try

[@grmpyoldjock8251]

The configuration could be wrong bleed it with the diagnostic tool also could be the switch resistor value to high .worth trying a bsi reset?

[@RevivingSalvage]

I've tried the scanner and doesn't reset it but thanks for the advice 👍 merry Christmas 🎅🎄

[@grmpyoldjock8251]

@@RevivingSalvage same to you pal And a geed new year 👍🏻 Lang may yer lum reek 🎉

[@MrGMawson2438]

Great video mate

[@RevivingSalvage]

Cheers buddy 👍

[@kingbolen_official]

Cool ! Keeping good videos.

[@lyndonwebber1389]

Don’t assume the new sensor is working,test it if possible. Merry Christmas

[@andytaylor5074]

Great video thanks

[@lindameehan949]

Bit buy bit get it good m8

[@RevivingSalvage]

Cheers buddy 👍 Merry Christmas 🎅 🎄

[@martinburbridge7545]

I'm 100% sure but I would probably say that abs pump is coded to the car which is why it maybe throwing up the code I'm no macanic just a DIY guy like yourself so fitting old one may fix your issue I keep a look out of upload keep my fingers crossed 🤞

[@Taz6688]

Some cars have an ABS bleed procedure, you have to follow a setup routine to get rid of the air, may not be on this car but the code reader should have an option if it does.

[@wayne3790]

Brilliant video as always mate, thank you!! 😊👍 I’m sorry I have no suggestions for you in regards to the low brake fluid fault, but I’m sure someone here will be able to point you in the right direction 🙏 I’m sorry things haven’t been going right & I can only imagine how bitterly cold you must be working in the garage without any heater. Anyway, Merry Christmas and a very happy & healthy new year to you & your family mate 🎉🎊🎅🏻🎄☃️🥳🍾🥂🎇 Best wishes to you all 😊👍

[@grmpyoldjock8251]

bad wheel speed sensor

[@MrGMawson2438]

I don't have a clue

[@RevivingSalvage]

Lol

[@stephenwalsh8184]

🚘👍

[@MrGMawson2438]

Hello mate

[@RevivingSalvage]

Merry Christmas buddy 🎅🎄

[@MrGMawson2438]

@@RevivingSalvage Happy days mate

[@rick9380]

You will learn in time to steer clear of French cars, a lot of tec's won't work on them these days.

[@bigbhp6808]

Not bieng funny bud but that Peugeot needs scrapping the time and effort involved doing it not to mention parts ita not worth the effort

[@LondonCarnaval]

Music did my head-in. Why don't you just use voice to explain what you are doing or give info and advice. For the the rest of the video; silence is golden.

[@stevenjohnson6082]

why would you let out aircon gas, this is why nobody buys your cars because you dont care how you repair them

[@RevivingSalvage]

It was empty the cars had been standing for 4 years and the old condenser was broken. There was no gas in it.