Go Kart ATV Engine Swap ~ Kawasaki Bayou 220 Ep2

[@benjamintaylor3962]

Can you show the shifter setup? Or something like that in another video? Any help would be great! Thanks guys, keep up the good work!

[@melted_pistons]

I’m willing to bet when this is done it will be the most reliable kart y’all will have. I’d love to see that style of engine in the front, since it has a driveshaft

[@kontrakgaming4107]

Man oh man I love this channel. I’ve been wanting build a go kart since I was a young boy and now that I have adult money I’m going to start building one.

[@fabricationnation8052]

Was that a lil Red Beard I saw in that background?....Growing up in the garage is what got me where I'm at.....I look back to the days my dad was building and racing dirt track cars, no doubt that's what got me where I'm at! God Bless you guys!

[@megadawg342]

3:00 the BIG RED BEAST! Luv ya, Bro!

[@crowofjudgement159]

I think i like these easier to do builds better, more videos faster and for us at home it's more of a build that we would do and be interested to do since less tools are required and you're not starting from scratch. Like this build or any prebuilt go kart/mini bike. Not to say i don't love the bigger builds too😁

[@davidowen888]

The bayou coming along 👍

[@ryrummler8143]

Finally a kart where the engine is sprung weight as any vehicle should be

[@troycrowder9942]

yes it is a spring and its an easy fix just make sure you find all of the old one i used the clutch springs out of an old cheep chain saw haven't had any problems yet nice work guys i like this build

[@Joe..3.8.0.9_]

Red ......... Ya welds look pretty good ! Now add some nitrous ! Those little kits you can buy on E Bay and Amazon for like 34 bucks , those little nitrous bottles , give a 6 second rush of madness lol......... Watched a video on mini bike engine using the kit Pretty cool !! They stepped down the nitrous intake , got 8 seconds worth and the engine was no worse off POWER at the push of the tiny RED 😂 button !! Come on , I know if anyone could make it happen , it be you !! Joe Navy veteran 🇺🇸

[@RedBeardsGarage]

We have used those kits in the past and have some on the shelf. We will get one out soon and use it again

[@Joe..3.8.0.9_]

@@RedBeardsGarage Cool Love to see what kind of result you get on a bike or go cart ?? Joe

[@minibikeaction4266]

The way you did that is actually pretty cool and will probably work good. Just neat stuff all made from the mind of Red Beard.

[@benphillips4423]

As far as the shifting problem. Try changing the oil and use Kawachem oil which is Kawasaki brand oil. It fixed the one I used to have.

[@RedBeardsGarage]

Yeah I'm sure this old engine hasn't had a tune up in a while

[@eladvanallen8282]

I think an overhead shot on that band saw would be much more interesting one where we could see the lines that you are cutting. no hate intended just some friendly advice from a fan.

[@hendersonlandworks6158]

Take the single shock off and go back like the bayou come factory it will articulate like a truck rear end that’s what made the bayou four wheeler awesome was the rear end flexed. Way y’all are doin it is just throwing it together

[@neelsscheepers8841]

Nice work guys. You give me lots of cool ideas for my off road go kart build, as soon as i replace my MIG welder that went up in smoke today so i am back on the stick welder.

[@rickperisian4225]

Looks like it will be a fun ride

[@adamwatts14]

You really need a CNC plasma table now!!

[@WesleySnyder]

Danial needs to be in the intro ....love the build

[@chandlerhester3461]

Bayou 220s are badass I had one I rode it so hard every day and Bent the axle and if you tried to go fast it would sway back and forth bad but there beast I had a 2001 to it was also a beast

[@TJ-Bridger]

I love the vids but I’m dying to see the big 670 buggy I really wanna know how your gonna supercharge it hahah

[@Kettenhund75]

Greg, I looked through your tools page on amazon and didn't see a pipe bender. What bender do you use? Also, I saw several tube notchers - bayleigh, eastwood, and one more. Which one did you like the best?

[@mingusbreeze]

Thanks, it's looking pretty nice.

[@redneckkarts4282]

You guys should build a barstool racer I've got one with a Briggs 5hp and no breaks and I topped out at 56.3mph

[@brodjohn5993]

I would love to know where can I avail that round aluminum fuel tank looks awesome? Thanks in advance

[@kartnerds]

Great looking buggy

[@CainSample]

Hell yea brother! That is awesome✌

[@BeastmodeBros12]

WE NEED THE ARROW 150

[@quinnwarman5139]

I just fixed the gear shift on my bike with the same problem it's a spring on the shifter shaft that keeps it centered after the gear change

[@RedBeardsGarage]

That's what I was thinking was wrong with it. Thanks for the info

[@ProbeGT2]

if you could find an old Polaris Explorer 4x4 atv i think it would make a great swap in a buggy. Ot has good power, 4 wheel drive, cvt and the best of it, it's chain driven front and rear.

[@Nitewatch-xc9yz]

You gonna do any bracing from the frame to your suspension/motor mount?

[@coolerman4u]

I was hoping there would be a Link there for the cables that you were talking about the 20-foot section I'm not seeing it thank you have a great day keep up the awesome builds

[@andrewwillis8084]

What chew do you use I like Copenhagen southern blend and straight

[@twiztedmowers2]

I swapped a 220cc bayou engine and rearend on a mower 2 yrs ago.

[@bob8085]

Was it good?

[@Tazounds]

Hey, Red I have a question and I would love it if you could help. I have a Kawasaki EX 500 and I can't a spark I have check all the wiring, plug wire, plug, coil, and computer. Dude I am losing my mind trying to get it running what else could it be so I was wondering if there is something else I could check! anyway, Thanks.

[@randywells9628]

time for coffee and some R.B.G.....God Bless.

[@michaellawson7788]

I am looking to get one of those fuel tanks do I just need to email what you posted in video and use you as a reference?

[@damianellis3554]

You should do a reverse trike what that other frame the four-wheeler

[@austinliveoak1018]

When are we going to get an update on the IRS buggy build. Haven’t seen anything about it in a while.

[@RedBeardsGarage]

This week sir

[@kingavegarage8722]

I really hope you are going to widen the rear axle.

[@joseliosousaalves7340]

muito legal e bonito seu kat cross

[@fishinkarts2865]

A boy pulls a hammy. A man pulls a hemi.

[@dirtrider6090]

What blade is that on the band saw? And how do you get the stencils

[@idcanymore5287]

I have a prairie 650 engine that I bought for the clutch. Supposedly it only has 85hrs and the engine is fine but the the gearbox has a chain broke. I got what I wanted as I didnt pay much and the clutch was in great shape. Unfort it has no carburetors and I would also need the electronics and radiator. So basically it would cost a small fortune just to see if I could get it running. Also doesn't appear its easy access to the gearbox its like you have to remove the heads and split the whole engine in half or some crap I really haven't looked at it much. So it's pretty much sitting on my bench taunting me.

[@kennethmartin2779]

Need help looking for a kohler 13hr fuel pump on gopowersports

[@brandonfloyd6321]

Might just be clutch adjustment. Clutch adjustment is behind the plastic cap held on with two phillip screws below oil fill.

[@ramsn1971]

Bad ass mod!

[@marvicty]

How bout a link for the "build your own cable kit"?

[@foreman4505]

i think they should build a go kart that can go in deep water

[@megadawg342]

The CV joints will be an issue. They do not work well at extreme angles. Driveshaft U-Joints will work better.

[@RedBeardsGarage]

It wont be at that extreme of an angle when finished. Thanks for looking out though

[@streetrossi937]

What song is the beat in the background coming from

[@djtiesto69]

Anyone know what kind of muffler he put on it?

[@Amy-wh3dt]

Cool

[@danchannels5983]

Nice

[@boneil607]

"lovely assistant"..... Must mean your wife's filming lol. That's what I would have to say if my wife was helping me out 😂

[@M.TTT.]

Thousand dollar+ weld table, ten dollar hazard freight grinder lol, not bashing you at all, its just a funny juxtaposition. My HF grinder lock button broke fast.

[@aaronyoung8132]

Why is the first video private and this video isn't on the mane page

[@M.TTT.]

patreon maybe?

[@aaronyoung8132]

No I think it was a glitch I saw this episode before the first one was out and I was the first like and comment xD

[@M.TTT.]

@@aaronyoung8132 oo lol

[@brutallyhonestmf5578]

This build looks like something that Cars and Cameras would build not RBG... RBG have the skills and tools to build something way better.

[@thequadsquad4801]

I put a Honda Civic motor and transmission on one in 2013 I'll try to find the video of it and up load it to my channel

[@killaz123456789100]

Lol looks like peter griffin with skinny jeans on lmfaol but good video cool motor

[@Jesse_Jessie_James]

They shut the school for a day cause of flooding? We never had that happen here. We always had to go to school in knee deep snow. And always had to walk to the bus stop. The principal we always called him Mr Skinner. Cause he always acted like the cartoon caractor on the Simspon's.

[@mikeadams9641]

Send it

[@realxtreme2471]

To be honest it could maybe use a better engine, I mean im putting a KLR650 in a honda odyssey.

[@Shredxcam22]

Why not order springs for specific applications. Tbey arnt that expensive. Not ever kart needs the same spring rate.

[@timbyford21083]

Def needs wider rear end....

[@southernyankeebuilds4419]

Dont forget if you watch on youtube go check out the roku channel. Watch on both like me for max support lol

[@FastLaneLyfe]

That's a narrow rear end!

[@marcruales8050]

Red beard get rid of the intro. It’s old and not good.

[@Bri-tg6xr]

It's just too long really, we all fast forward through it.

[@devonfretwell3351]

Bri real fans don’t