Coleman CT200U / CT200U-EX Mini Bike Sprocket Change ~ Mini Bike Monday

[@louisianashiner6857]

Absolute torque monsters

[@peterhost5719]

I’m 78 years old, I have had several Honda Gold wing motorcycles in my lifetime. Now I have this little scooter and I love it. I have it set up so I can give my great grandbabies a ride. I wish there were someone else in the area I could ride with close to my age. I like these videos

[@markcollins5026]

Man, I'm 66 just got a Massimo 200mb, what a blast, I also have a dual sport motorcycle and a quad, never to old !

[@MrPetepictures]

Mark Collins where are you located? I’m in Northern Alabama

[@markcollins5026]

Man, I'm in Arizona, to far !

[@BM205]

@@MrPetepictures Hi Mr Pete I'm from north Alabama too (Cullman)

[@kalebporter7458]

I’m 33 I’m in Tuscaloosa, Al. I ride with anyone wanting to ride. I find myself up 65 north pretty often. I was raised in Winston County I’m a little bitty town called Addison, Al.

[@raydogghilton9276]

I have a brand new ct200-ex mini bike and I am keeping it stock. I like the way that it handles now. I will buy a new mini bike with a clutch, torque converter and comet drive belt if I want to go faster!!!!! Your upgrades are fantastic if a person wants to go faster on these 200 series mini bikes. Keep up the good work gentlemen and do not let nobody tell you differently!!!!!

[@IForgeWeight]

I just put a torqe converter on a brand new br200 it's slower now. But is so smooth The back sprocket is why I am here I will definitely upgrade

[@jimmymcfarland4184]

I'm 5:32 into video Red Beard. Same issues. One bike faster than the other. Gotta finish the video. Thanks for uploading this issue sir! Ok finally finished watching. I think the zip tie trick will work for sure!!! Thanks Red Beard! Ordering stuff Tuesday! Power sports!

[@Ezdrumms]

Bought one of these because of you guys lol! I’ve been working on perfecting my build, I’ve done a few things with it sofar just an air intake carb jet upgrade gov screw removed and ziptie trick and I’m topping out at 33-34 mph. Next up I wanna remove the actual gov and put on one of these sprockets. At some point I straight chained it and topped out at 54 mph that was fun until the chain snapped😂 so I just went back to the regular jackshaft and she runs fine again. Definitely recommend for any beginner I went into this with zero experience and have learned so much just on my own let alone what y’all have taught me through these weeks! Keep putting mini bike vids out!

[@lotus6314]

Was planning on doing something like this. Did the clone engine it came with ever crap out on you after all that?

[@FireAndGasoline]

Huge difference with that sprocket swap!! The ziptie trick is the first thing i do to an engine, never had a problem. The way i do it, i cut the head off of one zip tie and put it on the other zip tie. That way its somewhat adjustable( you dont have to tighten it all the way). You can do it that way without removing the tank by feeding the ziptie from the carb side.

[@modelnutty6503]

can also play games with where the springs are located on the arms, or different weight springs, or alter the springs length. totally recommend spending the 30 bucks for a mini tach to know what you're getting with changes. edit: IMHO, better to have the governor in place working about 44-4500 RPM, with a stock mill that's a bit to the high side as a reminder "hey back off a little!".

[@ilovecheesecake516]

will it mess up the engine?

[@FireAndGasoline]

@@ilovecheesecake516 some people say it can, we have never had an issue. It usually wont rev high enough just doing that to cause valve float. To really get the most out of your engine safely, you want a cam, billet rod and a lightweight flywheel atleast.

[@joshuacroxton7310]

I'm dead, the savage part "They must be 2 year olds"

[@DeadBaron]

Man you guys have it made. Wish I had a yard like that and easy access to a wide breakdown lane, you can test everything without going anywhere.

[@RedBeardsGarage]

Yes sir. Hoping to get some land in the next few years to do some real testing

[@CBR600_Dad]

Awesome! I laughed when yall both came flying over the driveway!

[@ralphthedog1660]

Hi Red Beard. I tried the zip tie trick on the spring and gained 5mph. From 25 mph to 30. Would only do 20 out of the box and then backed that screw out that stops the throttle and got it to 25. My neighbor has a Honda trail 70 with a speedo and said his said 28 when I was at top speed.I'm using this SpeedTracker app. I wanna go riding with him right now but he's not home and i can't wait cause I have that performance up grade from Go Power Sports and I'm putting it on today. Thanks for the code and the 10%. I also picked up the muffler. I;m gonna test it for top speed with and without it but for just riding around my neighbor hood after work, a typical suburb 5 miles north of Detroit, and I don't need unhappy neighbors. Awesome videos, everything is explained in detail but plain and simple. Thanks....JOE

[@RedBeardsGarage]

Thanks for watching and supporting the channel man

[@ralphthedog1660]

The header gave me 3mph and the air cleaner and jet and tube gave me 2 more for a top speed of 35 and tons of torque, and I weigh 292. Oh yeah, when I did the zip tie I started the motor like usual, put the choke on, pull the rope and when I turned the choke off the bike started to move thats how much more rpm's there was.Where next? I'm not sold on a torque converter, everyone saya it's much faster but most people at the Detroit mini bike races use clutches and some are hitting 60+. kzbin.info/www/bejne/pYmkm42bfdpqb9k

[@ralphthedog1660]

How will I know when I need the stronger valve springs and do you have a video for that? Ok, watched the vid again and I need the springs but will wait for the video for that. Did it on a few cars 45+ years ago and the heads were off the car so I would like to see it done.

[@RedBeardsGarage]

+RalphTheDog #1 a cvt is my favorite. There is a video on how to do the upgraded valve springs on my channel. There the same on all these engines.

[@ralphthedog1660]

Thanks....JOE

[@fatbuddycat]

Awesome video! Maybe say "less expensive, economical or reasonably priced" rather than "cheap" when describing something that could possibly come from future sponsors or companies that would like you to review their tools. Your videos are the best because it's hands on, how to and your projects are achievable with knowledge gained from your tutorials. Just a suggestion because I like y'all so much.

[@justinpate796]

Hey Red beard ,If you back out the screw that holds the throttle from getting its peak power, there is a great difference but the two random holes on the throttle arm hit the bracket so I ground those holes off and got just a little more power, it works great.

[@elesjuan]

Dude Woah! These things haul ass up hill now!! Hill climb race!!! Thanks as usual for the limitless entertainment! Always enjoy your videos!

[@AndrewHollywood]

I like how you guys don't curse. Thanks

[@jamesmaroon6161]

Man that is SO quick. Great job man. To much fun.

[@jimgriffin464]

time to do a one or two day camping trip and see how practical they are on a 30 or 50 mile round trip !

[@alexiswuebbling8331]

Dear rb. I have a baja warrior. It is stock except for just neutralizing the gov. It does 40 mph fairly easily. Have had it for several years now and never had trouble with the valves. Again it is stock set up . Love the vids and thanks..

[@guyallphin1295]

Thank you for your videos. I have a MB 200 and I love her. She is great to carry things around the ranch and just have fun on. I have learned a lot from you.

[@RedBeardsGarage]

Thanks for watching!

[@italianforu1]

big fan of your videos, just had a new falcon delivered to me yesterday. did your spring zip tie trick before i even took it on the first ride. as long as you dont hold it wide open, it will not blow up. i am about 6'1" 265lbs and i cant believe how well the bike hauls my girth around. looking forward to your other projects and vids. keep up the good work!

[@RedBeardsGarage]

Thanks for supporting us man.

[@davinlyda1461]

Those look so fun. My brother has a baja heat with a torque converter and a lot of engine mods. When you get the torque converter you will never want to go back to the old clutch

[@Ezdrumms]

The converter dosnt help with top speed right? For now I’m good at my current speed so I don’t wanna put one on and have that reduced might just upgrade the clutch.

[@deekw8311]

most fun a guy can have with his pants on

[@MJRamirezVideo]

Thanks for sharing. The knowledge and humor is gold.

[@carlspackler5013]

Loving minibike Monday y'all. Oh and you did not break the throttle arm, my ct200u-ex is the same way but my daughters ct200u's still have them, for some reason the new ones are coming with it cut down.

[@RedBeardsGarage]

Thats good to know. Maybe so people cant get there pants or something caught in them or something. Thanks for watching

[@CHAD-RYAN]

red beard. if you use your legs as shock absorbers, putting more pressure in them than as you would sit mormal (on the red bike) it makes a big difference going over bumps and how it feels riding.

[@HenauderTitzauf]

The reason for the camo being a bit slower is, the cellphone has a cloaking program that takes just a smigen of electrical energy. Therefore when it goes into the cloak the human body picks up another pound or two, thus slowing the bike. Other things is the bike cloaker weighs about 23 pounds not cloaked, and when cloaked older cloaker clog the cloak filter, thus adding a few pounds. But, after my research, I can't really found a friggin reason for its slower mode, unless one of you is rather well endowed in the body parts and adds some weight. But, I did subscribe just soes I can keep up with the great things you do in your great vis. Keep up the great vids, looking forward to many more!

[@kalebporter7458]

😂😂😂😂😂

[@brianagee2647]

Love your videos guys!!! I just got a slightly used Coleman ct200u ex I’m putting a predator 224 on it!!! I may look into the bigger sprocket

[@brdllc]

Damn, I just picked up myself a marketplace deal also. Ct200u ex with predator 212 stage one. Looking into a bigger sprocket myself. You ever get one? I also definitely need a new exhaust the one on there is a tiny straight pipe right under the seat. Cool at first, but ungodly loud and after a short ride the spark is gone and I just want it to be quiet 😂

[@RedBeardsGarage]

Make sure to let us know what you want to see done to these bikes. Thanks for watching and supporting the channel.

[@crackawood]

Did they change something on the camo bike? I just got one a week ago and it went 19mph out of the box and 26mph after I removed the throttle set screw.

[@wrongturnarchery2337]

Please explain size of jackshaft an y can't I find a sprocket that fits like if I want it to pull like a beast an hall ass

[@jorgevieirajr250]

I am having trouble finding the 18 lb valve springs for my stock engine 200u-ex. Can you post the link

[@Eric-fv4jx]

The sprocket link is a dead link but i think i found the universal kit that you used. Ive seen three mods watching this CT200U series that i plan on doing. The predator 212 is already replacing the 190cc stock engine.😊

[@phillycheezcake907]

Came here from Jason explains things 😎👌sweet video's y'all keep it coming

[@EJ-74]

DAAAMN The sprocket is almost as big as the tire 😂🤣 Both bikes are 🔥AWESOMENESS 🔥

[@AllAround360media]

you guys are the Joe cools of motorized fun, just subscribed /all..

[@jaidencooper4507]

"I was trying to say that to your wife but she just TURNED the camera"😂😂😂

[@Awavy1]

Got same bike yesterday, QUESTION: What to do first? placing order today.. Do I buy stage 1 kit first ---OR-- should I get 18lb valve springs/gov'na delete and 60t rear?

[@fishingtwister]

Did you do any mods? Hows your top end speed with larger 60t?

[@Awavy1]

fishingtwister stage 1 kit was all I needed. No cvt or new sprocket. I ride trails. I’m a large adult dude. This thing with just stage 1 does me fine.

[@Awavy1]

Oh and stage 1 and my 6’2” 300lb ass it hits 42mph flat ground.

[@fishingtwister]

@@Awavy1 That's really fast...reds video only showed 1 or 2 mph increase and torque boost from stage 1 kit. I wonder what's the difference? Did you try the zip tie trick on throttle?

[@Deucealive75]

@@Awavy1 I call BS. There's no way that just a stage 1 kit will get you to 42mph on a Coleman 200. It is absolutely not possible for the stock engine to turn the RPM needed for that speed.

[@jeep2003]

I much prefer clutches over torque converters on minibikes even in the woods. With the right gearing they work great much better response than a torque converter

[@modelnutty6503]

TC's have that slip/grab action that isn't always as consistent/predictable as a clutch. TC's are cool for how they'll give grunt then grow legs too for sure.

[@budgettacticool8593]

I prefer my torque converter because I like low and top end. I have 3 mini bikes, one is geared low with a clutch and only does 25 but will get there quick as hell, the other is geared high with a clutch and does 58mph but takes a little while to get there and my torque converter bike does 49mph and gets there real quick. For slow rides the geared low bike is great, for long high speed rides my geared high bike is great but for all around riding the torque converter takes the cake. That's just my opinion as well as you have yours. No matter what, we can all agree mini bikes are fun as hell

[@ryansimpson8447]

The new intro is sick!

[@PowerBeeEngine]

Good video! I'm trying to get one of those Coleman's this weekend.

[@gd3design63]

'Lonnie, you got them tiny child hands, come here' 🤣🤣🤣

[@walmartynotc-jq1ps]

It's like chunky and noodles not really child hands , IYKYK

[@FordGTmaniac]

There's even more power and torque to be had if you change the sprockets on the crank. The only issue is that the clutches might burn up from the stress.

[@jpwipeout99]

Wow man I like this video I was laughing and smiling through the whole thing so much torque it looks like so much fun.

[@RedBeardsGarage]

They are a blast now

[@jackpacksmack5215]

We’re do I get a 60 sprocket for my Coleman CT200U ex

[@RaptorDude64]

is that all you ahve to do with the governer spring,just put a ziptie around it?and if so is this dangerous for the motor

[@funkadidgerous]

Nice. Those sprockets are huge! Can you also change the sprockets on the clutch to get more torque or to smooth out the ridiculous torque you have now? Can't wait to see these w/o gov'nr and a torque converter.

[@RedBeardsGarage]

Instead of doing that I would just mess with the sprocket on the wheel. We love the 60 tooth on these bikes.

[@kaylapearcey2527]

Instead of using zip ties you can cut a few coils out of the throttle return spring so you get more throttle. I was hitting 28MPH with this. I was hitting close to 5K and lowered it though with the throttle stop screw cuz I don't have my billet rod installed yet.

[@mikeeichacker882]

Got to love the sound of nature

[@RedBeardsGarage]

+mike eichacker and mini bike screaming over the driveway

[@novaguy383]

Cool video! Those bikes look like a lot of fun!

[@blacksmithrick]

I am 73 years old in WA state not looking for speed. Want to use like the tote-goats from the 1950'S. throw a gold pan in a backpack and strap on the .357 mag to follow stream beds up the mountains. Rick

[@sceneanuerebelrebel9244]

Trick with 72 is rear wheel 4-6" larger and raise axel back 4" and up three using the small grinder and mig .Use the Black Water as a rear tire .

[@melloreel]

I can't find the factory chain size listed anywhere? Is it 420 chain for both jackshaft and wheel sprocket? Thanks for your help. Oh I sold the Murray explorer, and now have the ct200u to work on👍🤣 I will follow you closely.

[@RedBeardsGarage]

+Melloreel it is also 420

[@budsheli]

Red beard, what length of chain is needed for the 60 tooth sprocket ?

[@rtabor5808]

where did you get the 60 tooth sprocket and chain I just got a camo bike today I'm 51 going through my second childhood most fun I've had in a long time

[@RedBeardsGarage]

+R Tabor go power sports. Links will be in video description soon.

[@rtabor5808]

thanks

[@matiasnaulin9889]

Have you put a smaller one on a stock coleman to see what top end it hits? Like a 40t sprocket?

[@edmorris6365]

How can I get more top-end speed smaller sprocket or bigger sprocket

[@whereswilly6780]

Ed Morris smaller sprocket on the wheel and larger on the clutch

[@lupisinn]

Yo love the vids keep up the good work man

[@davidcantrell64]

I heated my header pipe up with a lil torch and tweaked it in on a nice angle and made it go straight out right side of frame after burning my leg twice!! Wearing shorts. It’s much better this way on a mini bike.

[@bareloccSpringsBoyz]

What size chain did you use for the 60 sprocket?

[@maxtrigga9952]

I'd love to get one I'm 11 not sure if my dad would let me buy one though lol I turn 12 September 12th do you think I'm old enough to get one?

[@RedBeardsGarage]

Oh yeah. Thats the perfect age to have a stock mini bike

[@maxtrigga9952]

Red Beard's Garage cool! thanks man! by the way I thought this was funny my dad owns a pawn shop called red beards! lol

[@RedBeardsGarage]

That is awesome man

[@rylow252]

Red Beard's Garage how about a thumb throttle like on a four wheeler for the camo bike?

[@kaylapearcey2527]

That would be cool. I second that request.

[@morganhill1238]

TY SO MUCH......HAVNT LAUGHED THAT HARD IN AT LEAST 2 MAYBE 3 DAYS...

[@RedBeardsGarage]

Thank you for watching

[@mikebavoso26]

Thanks for doing the video. I just purchased the little Coleman camo bike to use around the ranch, we have a few Hills and it goes way too fast with the factory OEM sprocket...without you I would have never known!!

[@RedBeardsGarage]

Glad we could help man.

[@arlo12345678910]

Been wanting one of these for a while! Too much fun!

[@Timberwolf35546]

Seeing how much you got out of the red one makes me wish I hadn't slept on the one I found. I could've had some serious fun

[@robinbrowne5419]

Cool video. It's always fun to get more speed. I used to ride minibikes but that was 40 years ago. Now I have electric mountain-bikes which are actually pretty cool. You can usually add an extra battery to up the voltage and get more speed. I like the kits because you can change parts like the motor controller to handle the extra voltage and current. Also, I swear by 12AH deep-cycle SLA batteries (like Powersonic, for example) because they are easy to deal with (simple charger, no balancer), fairly inexpensive and lots of power... But they are heavy, so you always have to figure out a way to mount them mid-frame. 1/2" plywood and Gorilla tape works for me. The rear hub-motor never burns out, so you can run a 36V motor at 48V or 60V, (if you are crazy enough :-). Just make sure to have good knobby tires:and V-brakes for your mountain bike. -) But, seriously, I usually just ride my bike at 36V because it gets me to the store and back with no problems. :-)

[@bradcarpenter2396]

Great story RBG 🤙🏻👍🏻✌🏻

[@rockcitymarco9186]

Hey man I have a Coleman CTU 200 love it I'm going to change the sprocket love the videos Man... Happy Thanksgiving

[@phillipcarpenter5848]

I was able to get twice the top speed by removing the Jack shaft assembly and then I turned the clutch around and put a new chain on it I went from a top speed of 22mph to a top speed of 58mph

[@epicweeder420]

This is exactly what I'm doing please tell me what bike you did it on. The colman ctu-ex 200 or the smaller version?

[@Downtown.TonyBrown]

Hey man I just bought a Coleman ctu-uex 200, and it came with a bad jackshaft and bearings. but I have the new pieces, just waiting on the new jackshaft, what are my options on how to make this bike run better?

[@smallenginedude1181]

If you remove the governor how easy is it to blow up the motor

[@hampton1715]

Small engine dude if you drive it wide open without performance parts like billet accessories yes you will blow it up but if your driving around the yard you'd be fine.

[@RedBeardsGarage]

Well if you remove the governor and not do the valve springs its easy to warp a valve. As long as you stay under 6500rpms your pretty good with the stock rod and flywheel. If you can afford them then I would defiantly do it.

[@smallenginedude1181]

Red Beard's Garage I did a test of how long the engine will last on full throttle without the governor. The first thing that happened was the oil scooper on the rod broke off and shot out the block. Then the piston and the valves started to seize made make it harder on the connecting rod and rod then it finally blew up. ( the connecting rod shot out the side.) rip predator 212cc.

[@modelnutty6503]

said above, just not a fan of removing a governor on a stock mill, much better to get (or borrow) a mini tach and play games with the springs to set a limit/reminder, than not. older stock briggs usually cut out about 3700-3800 RPM, but 4500 RPM was a pretty safe limit for them. if I remember correctly, stock 5hp briggs powered go-kart limit was 5k RPM. being they're much like a 1 cylinder VW engine, understandable!

[@curtissmartin6322]

Nice to see Lonnie doing some presentation.cool vid the one with the shocks I turn it into a 3 wheeler.be neat.

[@Zeke-it2th]

You mentioned a billet rod and flywheel. I have that bikes little brother CT100. Can't find billet anything. Any ideas? I'd so much appreciate any suggestions. Nice vid BTW. Definitely leave the JS on the red, but id love to see a 75T straight chain. You'd at least have the torque it had originally (50T + 50% gear down. = 75T, right?). One less moving part to break. It'll be wicked fast, with no governor. 30 plus.

[@RobertPerrigoOkiechopper]

wish you had a 12 / 63 gear set for the camo bike, Mukuni carb, 36 lb double valve springs and ARC rod / flywheel. And lower rear air pressure .

[@RedBeardsGarage]

Okie email me or message me on facebook. I cant find your number sir.

[@watermanone7567]

Nice video. Are you using .004 valve lash? Thanks

[@RedBeardsGarage]

We haven't messed with the lash any.

[@masacre9932]

What’s the lash on 18lb springs ?

[@CreationsbyKris]

You all are definitely having fun out there. You really do need to gusset the frame ASAP. For safety, but I'm sure you know that.

[@coryfrymire2045]

His wife turned the camera away from him when he was talking lol

[@ktownc936]

My bt200x taken to full throttle likes to wavier on the rpms? I did bend the tab that sets the speed near where the screw is tacked in? Any idea what that could be? Basically full throttle it revs up and down. Awesome video Brothers 😎

[@johnnyhurtado4292]

Just bought one wanna do the zip tie thing how much more faster does it make it & will it mess it up if I leave it like that ? Let me know great video by the way bro!

[@andrewwarner1239]

mine went up 11 mph and nothing wrong has happened so far just don’t keep it pinned down for to long

[@zachbray3912]

Hey do you cover the 18lb valve springs in any of your videos

[@LNRRidez]

He has one that does go over it, I think its the governor removal video.

[@ohioshitboxoffroad2121]

I died at the savage part😂

[@John-sq7uf]

When replacing the valve springs, Can you get the right spacing on the valve without the thickness gauges?

[@jaycemoto4272]

If I do the zip tie mod and 10 lbs valve springs will I new to get a billet rod and flywheel

[@RedBeardsGarage]

18lb springs and It is recommended that you do

[@acoelho001973]

Those bikes are hilarious. Wish I had money for one but nobody to ride with. ☹️

[@cruzlundy7376]

You should mount the gas tank in front of the seat to help with filling it up.

[@cruzlundy7376]

On the red mini bike

[@dragonrider9244]

Wicked difference

[@daveunderwood6498]

Just bought one. I like what you're doing. Did you think of increasing the size of the sprocket after the centrifugal clutch? It would keep your wheel sprocket smaller. Apologies if you've already done it. I'm keen to get at mine but there is 4 feet of snow here and no good place to assemble it. Cheers.

[@donklem3270]

You guys rock, you make cool fast stuff!

[@72Buster]

What is the difference between the 18lb and 26lb valve springs?? Can you do a video on it?

[@RedBeardsGarage]

You only need the 26lb valve springs if your doing certain cams. If you have a lot of compression you would probably want to get the 26lb valve springs also

[@kaylapearcey2527]

I like the 22LB springs. They except more lift then the 18s. 18s will coil bind with ratio rockers and the 22LB and up will not. If your running stamped ratio rockers the 26LB springs can be too stiff.

[@jefflundquist5771]

The governor is there to keep from over revving the engine, floating the valves and potentially destroying the connecting rod. You can put stronger valve springs in to deal with the lack of a governor.

[@laverncarroll]

Thanks for all the info. You guys are going to good job

[@johnmartin560]

I've never heard of the zip tie trick. I feel a little dumb now for spending an hour making a new linkage instead of taking 3 minutes to zip tie the spring. I may put the stock setup back on and do the zip tie trick since my custom linkage has stuck wide open on me a couple of times. I'm also going to do a 60T sprocket now instead of saving up for the torque converter. I think that will suit my needs just fine, and the clutch seems like its holding up pretty well. I don't think I'll mind going a lil slower since its borderline scary fast on the trails right now.

[@RedBeardsGarage]

Yeah with that gearing ratio and the zip tie trick its all you need in the woods. Just make sure and be careful not to float the valves in high rpms, or just get 18lb valve springs.

[@juliedennis8642]

Zip ties... using my bag of tricks now!! haha

[@RexSmithII]

On a 18” tire with the 72tooth sprocket Can it hit the ground from leaning?

[@alhodge4051]

great video, if I change to the larger sprocket will I have to change the chain??

[@icebrgslimm2427]

What happens if I just change the sprocket to a 60, do I need to make your other modifications to feel the difference from stock.

[@mhunt01]

you guys should get one of the baja warrior minibikes and do stuff to it

[@RedBeardsGarage]

The camo one is pretty much a baja warrior

[@nathanbutler8240]

what happen to the mini choppers? did these mini bikes replace them? and we need a drag mini bike build with smog pump supercharger

[@RedBeardsGarage]

No we will be bring it back on the channel soon

[@dempsey96]

I was coming down to the comments to ask the same question! Can't wait for more on those

[@Birmp.]

Red Beard's Garage why is the red one faster then the camo?

[@edshrum9350]

I HAVE A 2016 CT 200 U AND A 2017 200 EX WHICH I BUILT THE ENGINE ,IT RUNS GREAT ,BUT WHERE CAN I BUY A LARGER REAR SPROCKET ? THANKS PAUL

[@ryanstratichuk7517]

Good job with the vids keep it up

[@mikeashbaugh7773]

Thanks for this!!!! My Baja 196 is a dog on hills in the woods, I have ordered a 72 from GPS!!!! Let’s see how I do

[@cattledog5464]

Hi Redbeard . I am a big guy like yourself. For slow speed trail riding,.. 60 tooth on a brand new one? As the 1st mod.? Even before the governor? Not interested in top speed. I am concerned with the clutch and hills . Thanks

[@bilykjohn9860]

I don't like the stock chain or sprocket if I don't add a torque converter but just add the new sprocket could I keep life long still for the engine doing that ?

[@boardsandstuff5008]

I like your videos shout from Puerto Rico where off roading is a big thing. Can you do a video on proper maintenance of the Coleman CT200U ex? I’m new to this and got that mini bike as a Christmas present from myself to my self. Yet don’t know much about this.

[@chriscollison3136]

Hey I have a question why do you guys not use Nibbi carbs? I run one on my ct200U pretty moded out and I love it and it is just a sexy thing to look at.

[@brianmccann666]

18 lbs Valve Springs huh. Thanks for that important 411 most people forget to mention when upgrading.

[@mrs.redbeard4718]

Brian Mccann Thanks for your comment! You've been randomly selected to win a RBG sticker. To claim your prize please Private Message RBG's Facebook or Instagram with your address.

[@brianmccann666]

Mrs. RedBeard ... Message sent. Thanks.

[@carrionremains926]

u guys got any inside info on the go powersports development of the cvt clutchs? you know if they will be out by this fall?

[@RedBeardsGarage]

Hopefully just another month or so

[@carrionremains926]

saa weet!

[@carrionremains926]

saa weet!

[@tjayfilms6048]

I just got the same bike but in orange white .. I absolutely love it already