Register Cisco phone on Grandstream UCM PBX |

How to register Cisco phone on Grandstream PBX | Cisco CP7821 IP Phone | Registration on Grandstream UCM PBX
If you like the content, then please support my channel.
PayPal.Me/voipknowledge
www.paypal.com/paypalme/voipk...
‪@ciscoanimado‬ ‪@GrandstreamNetworks‬
#grandstream
#ucm
#ipphone
#cisco
#sip
#interoperability
#intercom
#videophone
#wifiphone
#calling
#google
#youtube #youtuber #subscribe #subscribers #tech #techyoutuber #techreview #techtips #techie #techvideo #support #technology #techtrends #technology
‪@Voipknowledge‬

[@magarbag]

thanks you VoIP knowledge

[@Voipknowledge]

Welcome

[@tamerelkhodary]

Amazing bro

[@Voipknowledge]

Thank you so much 😀

[@markkwofie4925]

thanks my brother

[@Voipknowledge]

Thanks for watching the video.

[@johnmikky9619]

Now I have mine running on 7911 phone but for some strange reason, a few of the phones are behaving in an abnormal way 1. They are successfully registered 2. I can call the line from another extension 3. They are not able to dial out. when I dial a number say, 2000 for instance, it just hows dialing 2 and beeps telling me the extension dial is not available at the moment. I suspect it has to do with the dialplan but then its same dialplan that worked for the other phones and they are same model. Have you gotten this issue before and how were you able to handle it? I will appreciate your feedback. Thanks

[@Voipknowledge]

Hii, sorry for the late response. I was hospitalized, so I was unable to respond you. Sorry, I have not worked with 7911, so can't say what exactly the issue. Since dial plan is same for all phone models, you may check from PBX side as well. Are you using Grandstream PBX or some other brand?

[@mohammadaltaf6887]

hello sir, how are you sir i need a video for setup a company logo in grandstream grp2601p phone.

[@Voipknowledge]

Hii, I am good. Sure I will post a video soon.

[@informatintechnologyandent4314]

very nice video sir, could you please help me in adding cisco phones 7965 and 9951 with 6304 a grand stream or share config files please many thanks

[@Voipknowledge]

Hi, Thanks for watching the video. I need to check if I have these model config file, I revert you soon.

[@adf335]

Hi @VoIP knowledge, do you have the dial plan and config file to configure 7960 ip phone ?

[@Voipknowledge]

Hi, I am sorry for the late reply. I will share it to you tomorrow. Thanks for watching the video 😊.

[@adf335]

@@Voipknowledge Hi no worries, i tried to modify a config file found on google but when the phone try to register it search for a CLT.tlv file

[@Voipknowledge]

Please ignore TLV file, it's not mandatory.

[@southernphonemanstelecom2634]

inbound dial plan as follows, allowing all calls unrestricted, it would look like this, _!X., and then in outbbound, there can be 3 phases, make sure as to what ever extension you are setting these to, that the permission on the extension is higher then the dialplan, so for emergency 911, you can go local for permission, and then prepen 1-XXX,(XXX) would be for your area code, then set which sip account you are registering this to, then save &apply changes, for national,same this only you wont prepen anything here, set your permissions to national, and you could simply go with_XXXXXXXXXXX, then save and apply changes, there are a lot of ways, but these are ways that we at the Southernphonemans Telecom Central Office goes with, and you use these dial plans regardless of the type of phone you are using

[@thaslimsalim7929]

Hello VoIP Knowledge can you please share with me the dial plan file for Cisco 78xx. Thanks in advance

[@Voipknowledge]

we.tl/t-BYYbdF9Lly

[@ifanizzu]

Hi man. Love your work. Please help me share the config file as I am trying to register a 7975g with UCM 6308.

[@Voipknowledge]

Hi, Does it support sip version?

[@ifanizzu]

@@Voipknowledge i believe it is. how can I confirm about this ?

[@archeoptrix1979]

hello , how do i get the conf files ( dial plan and the sep conf xml. trying to do the same.

[@Voipknowledge]

Pls share your email id

[@Voipknowledge]

Hiii Please use the below URL to Download the file. It's available only for 24 Hours. we.tl/t-yVObVoNwez

[@Voipknowledge]

Please support my channel. Please do like, share and subscribe.

[@neopen2]

This is what I am looking for! Could you share the config for 8821 again? The file below is expired. Thank you.

[@Voipknowledge]

Please find the below link. we.tl/t-P8m7Sl6Lo4 Please subscribe the channel, and recommend to others.

[@naeemkanasiro938]

Can you share the software/link for download you are using for Capturing?

[@Voipknowledge]

Hi, You can use Hycam 2.

[@ravinduthuduhena2206]

Thank you for the video!!.Can you Please share the 7821 xml config and dialplan xml file.the previous link was expired.

[@Voipknowledge]

Hi, Thanks for watching my video. You can download the the file from the below 👇 link. we.tl/t-5gtWyAW2gQ

[@hasanmajdalawi8376]

hello dear, i tried your way step by step but its not working, there is something wrong, does the version of the CP7811 make a problem, after upload the file using tftp the phone still registration in progress and no action? what must i do in this case?

[@Voipknowledge]

Hi, Please check your phone SIP load info (sip78xx.11-7-1-17) and put the same version in config file. Further you need to factory reset before setting up TFTP path and make sure to reboot the phone after TFTP setup in phone.

[@salvadordominguezgallo9621]

Can you share config file for CP-7821, please?

[@adsmm8641]

sir please help me out .i have cisco 7962 model .need to configure with grandstream ucm 6302.i already subscribed your chanel

[@Voipknowledge]

Hi, I have tried but not able to find any document for your phone. If I will have this phone at my side then I can test. I will update you if I get any.

[@johnsmith_73]

Thanks for the great step by step video. Could you please share your config file. I am trying to register a 7945 with UCM 6301. I tried the links from previous comments but download link has expired. Thank you

[@Voipknowledge]

Hi, Thanks for watching the video, please find the below link for your help. we.tl/t-a8epDAn9Fd

[@johnsmith_73]

@@Voipknowledge Thank you so much!

[@ArturKowalczyk-de7vz]

The link doesn't work again. Can I have a link to the configuration file? Regards

[@Voipknowledge]

Hi, Please use the below link we.tl/t-a66xyuEavF

[@ArturKowalczyk-de7vz]

@@Voipknowledge Thanks :]

[@simonacojocaru5490]

Hello, sir! Can you tell me How to configure pbx for registration the Cisco phone?

[@Voipknowledge]

Hello, Which PBX you are using?

[@PabloDavila-lm5wh]

Hi, I need the config file to register my cisco cp7821 in a Yeastar S20. Please share the link again. I am planning to use the file as a template.

[@Voipknowledge]

Hi, Please find the below link for file. Please subscribe the channel if not subscribe. we.tl/t-D1h10hu5Z2

[@udayangawickramasinghe1509]

Hi, i want to use 7821 phone with Grandstream UCM6302. How can I get the dial plan and the config file?

[@Voipknowledge]

Hiii Please use the below URL to Download the file. It's available only for 24 Hours. we.tl/t-yVObVoNwez

[@Voipknowledge]

Please support my channel. Please do like, share and subscribe.

[@udayangawickramasinghe1509]

@@Voipknowledge Thank you very muck...

[@kolandoto]

Thank you for sharing. Could the CP-7821-K-V03 Enterprises edition be registered in Grandstream UCM PBX? I tried following your instructions with unavail.

[@Voipknowledge]

@@kolandoto Yes it can be registered. Please prepare a file with correct credentials of sip extension

[@kolandoto]

@@Voipknowledge Thank you for your support. I have followed the steps provided incliding correct credentials, but I am still encountering difficulties. Could you please send me your SEP configuration template and Dial Plan template? I may be missing some key details from the ones I currently have.

[@Voipknowledge]

@@kolandoto Link is given below, and still not able to register I can help on charges basis. we.tl/t-9YnwS19K1V

[@kolandoto]

​@@Voipknowledge Thank you very much, it has been successfully registered.... do you have another videos that shows how to set up the Grandstream UCM6304 SIP with a remote Cisco CME via MPLS/VPN?

[@Voipknowledge]

@@kolandoto No I haven't tested that.

[@Frezzertc4rm]

Hello, can you please share the config file and dial plan file, once again for my cisco 7841 phone? Thank you so much

[@Voipknowledge]

Hi, Please find the link below. we.tl/t-j9baQBs9re

[@jwsc82]

Congratulation, can you share the file for cp-78xx

[@Voipknowledge]

Hi Please use the link below and sorry for the delayed response. we.tl/t-aiQWA9dAd1

[@LeninPonce-de6vy]

Hi, can you please share the config file and dial plan file, for my cisco 7811 phone? Thank you

[@Voipknowledge]

Hi, Please find the below link and support my channel. we.tl/t-heV0KtaQ5a

[@raidnoir8691]

Good Day, i followed your steps for 7841 and it worked but i had to use your download config file for it and i want to try it on Cisco 8845 and was wondering where do you download the config? i cant seem to google it? or have you also tried it ?

[@Voipknowledge]

Hi, I will check and update you if I have config file for 8845.

[@raidnoir8691]

@@Voipknowledge Thank you so much, i will be checking if it works if the client will send the unit

[@raidnoir8691]

@@Voipknowledge Thanks it worked flawlessly. The Video capabilities though needed to be enabled manually but the instructions to make it work are the same

[@Voipknowledge]

@@raidnoir8691 Thanks for the confirmation and I am happy that your query solved. The file is same just need to modify the load information.

[@anthonyquarshie4510]

Please can you share with me the config file and dial plan? I am testing it on cisco 7962G and UCM 6102

[@Voipknowledge]

Hi, please find the below link we.tl/t-4LDtK7pM1r

[@Voipknowledge]

Hi, I hope you got the file. please subscribe my channel.

[@mimi9617]

@@Voipknowledge pls share me the config file for 7841 and ucm 6204 , tks so much .

[@muhannadjawad8906]

Is Also can be done with 88x1 series ?

[@Voipknowledge]

Hi, Yes, but sip load info should be changed in config file.

[@ptslahore5862]

Hello, please confirm which firmware is used for Cp-7821 and why a different SIP port is used.

[@Voipknowledge]

Firmware: cmterm-78xx.12-8-1-0101-482 You can use as per your Sip server, mine is changed so I am using a different one.

[@ptslahore5862]

@@Voipknowledge can you please share the xml files. Also please tell why your are using 5498 port for grandstream UCM. Have you manually changed it to this port in grandstream UCM?

[@Voipknowledge]

Hi, Please find the below link for xml files. we.tl/t-vtRZysrzpc Yes, myside UCM port is changed manually.

[@markkwofie4925]

How do I get the dial plan

[@Voipknowledge]

@@markkwofie4925 Hii, Please find below link 🖇️. we.tl/t-WptAc0FVH3

[@Denver_nsh]

Hello, can you please share the config file and dail plan file, once again?

[@Voipknowledge]

Hi, Please find the below file URL. Please subscribe the channel and share to others. we.tl/t-kdXGj2MBpx

[@mohammadaltaf6887]

thank you for shared with us that information . but i have a problem your link is expire so can you give me new file for cp-8851 telephone we need to download that file. thanks

[@Voipknowledge]

Hi Thanks for watching the video, I will share it tomorrow.

[@Voipknowledge]

Hi, Please use the below link. we.tl/t-zBTZKblZfk

[@mohammadaltaf6887]

@@Voipknowledge THANKS BRO

[@Voipknowledge]

I hope you have already subscribed the channel, if not please subscribe 🙏

[@pompm5975]

Hello , I try to register 7821 to Third party system and IP Phone show registration in progress. I use firmware 78xx-14-2-1-0001-14 . I should change to firmware SIP first or not ?

[@Voipknowledge]

Is it starting with sip78xx ?

[@pompm5975]

@@Voipknowledgeyes

[@Voipknowledge]

Hi, Then your phone is already on sip firmware, you need to reset the phone once then push the files.

[@pompm5975]

⁠@@Voipknowledge Hi, now i can register third party system but cannot use function transfer and conference.

[@77cipo]

Nice video, one subscriber more. could you pass me the configuration file. Thanks

[@Voipknowledge]

Hii, Thanks for watching the video and subscribing the channel. The link is as below. we.tl/t-FrhO8RS40i

[@nickodana9539]

is it working if i use another pabx like NEC?

[@Voipknowledge]

Yes, NEC should have sip extension.

[@johnmikky9619]

Hello. Thank you for this video. I can confirm that this method works. However, when I tried with Cisco 7911 it keep saying unregistered. Kindly share with me the config file and dial plan for 7911 if you have them. Thank you

[@Voipknowledge]

Hi, Thanks for watching the video. You need to modify the load information in config file according to your phone. Please update as per below 👇 and as well mentioned your phone firmware in load information. sip79xx.12-8-1-0101-482 If still having trouble, please let me know.

[@johnmikky9619]

@@Voipknowledge Thank you for your response. Do you mind sharing your XML template for the 7911 as well so I can use, incase I have errors from other lines too. I have this line on mine,... SIP11.8-5-3S

[@Voipknowledge]

Hi, please use below link we.tl/t-mjRzma10wh

[@Voipknowledge]

Hi, I also request you to please subscribe my channel.

[@johnmikky9619]

@@Voipknowledge Thank you so much. I will try that later today and revert with feedback

[@tarekabderaoufbelkadi6682]

thank you for this great video, can you share config file and dial plan for 7841?

[@Voipknowledge]

Hi, Please use the below url. we.tl/t-RO0jai0e3I

[@tarekabderaoufbelkadi6682]

@@Voipknowledge thank you very much sir, have a nice day.

[@Voipknowledge]

Thanks for watching the video, please like and subscribe 🙏

[@tarekabderaoufbelkadi6682]

​@@Voipknowledge of course i will subscribe thanks i want to ask you a question i'm still having a problem with my cp-7841, i dont have the missed call notification i tried to upgrade it but i didn't succeeded, please if you have any suggestion to resolve this problem i will be very greatful. thank you very much

[@Voipknowledge]

Hi, I also faced the same issue, to fix this issue you need to downgrade your phone to "cmterm-78xx.10-3-1-12" .

[@zhir6465]

Thanks, can you share the sip 78XX file

[@Voipknowledge]

Hi, Please find the below link we.tl/t-QKumS3kNTQ

[@planeguy737max5]

Hi Sir, could you please share the whole config file with me? Thanks!

[@Voipknowledge]

Hi, The link is here. we.tl/t-zJ1yubtM5i

[@planeguy737max5]

@@Voipknowledge Thank you, earned a sub! Do you by any chance have the whole config file for an 8845 or 88XX??

[@dieser88]

Hello friend, I want to do the same configuration but my Cisco phone is a CP8821, could you help me with the configuration file.

[@Voipknowledge]

Hii, Here is the link. we.tl/t-OKo60uvmk4

[@dieser88]

Thanks friend, now it works with your help

[@Voipknowledge]

@@dieser88 Thanks for your feedback, Please subscribe if not subscribed already.

[@asm4anas]

Brother i have 7841 ip phone, can i use this phone in Yeaster pbx?

[@Voipknowledge]

Hi, Yes you can use this phone with yeastar PBX as well.

[@asm4anas]

@@Voipknowledge Thanks for replying, could you please share me any video or any articles to follow? I tried many times but no luck

[@asm4anas]

@@Voipknowledge hi can i contact you through email?

[@Voipknowledge]

yes, you can contact me through email.

[@asm4anas]

@@Voipknowledge could you please share your email id?

[@ahmadmagdi9212]

Nice video! Please share The link agaun is expired

[@Voipknowledge]

Please subscribe the channel

[@user-sz1kn4ko2i]

Can you share config file and dial plan for 7841?

[@Voipknowledge]

Hi, Please use the below url. we.tl/t-RO0jai0e3I

[@user-sz1kn4ko2i]

@@Voipknowledge Thank you very much. Can CP 8845 phone be capable in connecting also? Would you have and share config file and dial plan for CP8845

[@Voipknowledge]

@@user-sz1kn4ko2i can you share me the load information of 8845 from phone system info

[@Nicomorgaj]

Please can you share all the config file for cisco ip phone 7821 and um6300 please?

[@Voipknowledge]

Hi, Thanks for watching my videos, I will share you by tomorrow.

[@Nicomorgaj]

@@Voipknowledge thanks!

[@Voipknowledge]

Hi, Below is the link for file. we.tl/t-COcNYMVylX

[@FlightStreaming]

My cisco 8831 is not registering can you plz help me out

[@Voipknowledge]

Hi, Please share system info page of your phone from browser ( web gui)

[@FlightStreaming]

@@Voipknowledge can you share me your email or whatsapp number i will share there

[@Voipknowledge]

Hi, Can you check if your phone has SIP firmware. You can check it in load information. If your phone does not have sip then you need to upload sip firmware first.

[@liviadobri3525]

Hello, can you please tell me where i can find the xml file for cisco 7841?

[@Voipknowledge]

Hii, You want config file ?

[@liviadobri3525]

Yes, i have an erron when i try to upload the config file on the phone

[@Voipknowledge]

Hi, Pls use below link to download the file. we.tl/t-IokC7T1UQ0

[@Voipknowledge]

Hi, please subscribe my channel.

[@HudSungkar]

Can you share the config link again for cp-7821 ? Because it's expired

[@Voipknowledge]

Hi, Thanks for watching the video, Please subscribe the channel. Please use the below link to download. we.tl/t-DfW88ejNiV

[@AchieScottGraham]

⁠how do I do that , don’t know that much about it😂. just bought the phones and want the 3 phones to call each other . I have a MacBook if that helps 😊

[@Voipknowledge]

Which phone models you have and do you have pbx as well?

[@AchieScottGraham]

I don’t have a pbx and I have the 7841

[@Voipknowledge]

@@AchieScottGraham Hi, You must have a pbx to use these phones. Otherwise they are useless.

[@AchieScottGraham]

@@Voipknowledge ok what pbx should i use

[@AchieScottGraham]

can 3cx work@@Voipknowledge

[@magarbag]

Hello sir can you this notepad Links

[@Voipknowledge]

I don't understand what do you mean.

[@jstnngy]

Can you help me registering the 7841 ip phone? In CME 7841 type is not available 😔😭

[@Voipknowledge]

Hii, Can you confirm me where are you registering this device, I mean PBX.

[@jstnngy]

@@Voipknowledge i dont have pbx, and i am only using version 12.5 cucm, in the ip phone unprovisioned is popped up.

[@jstnngy]

@@Voipknowledge also the CME does not have 7841 ip phone type

[@Voipknowledge]

I have one more video on cucm please check that.

[@kelson170199]

Why share the SEP configuration files with me?

[@Voipknowledge]

Hi, Which phone model you're using.

[@magarbag]

how i can download dial plan file pls help me

[@Voipknowledge]

Please use below link to download we.tl/t-63zo2bRvT9

[@Voipknowledge]

Hi, I hope you got the dial plan file 😊.

[@mimi9617]

pls share me the config file for 7841 and ucm 6204 , tks so much .

[@Voipknowledge]

I will share tomorrow.

[@mimi9617]

Thank you so much@@Voipknowledge

[@Voipknowledge]

Hi, Please find the below link for Cisco phone config file we.tl/t-48hLeVvOUi UCM config link kzbin.info/www/bejne/pXzVfYeqn9R0rrM

[@mimi9617]

@@Voipknowledge not working for me :( , does it work with cp-7481-k9 ?

[@Voipknowledge]

Hi, Please check if your phone has sip firmware loaded into it. Otherwise the file is working for me and others as well.

[@sanimanst7133]

Sir, Can you share config file and dial plan for CP-7811?

[@Voipknowledge]

HI, Please find the below link and modify SEP file with your Phone MAC. we.tl/t-U6yNUb88gx

[@sanimanst7133]

@@Voipknowledge Thank you very much.

[@anonymouslog8929]

@@Voipknowledge Please I really need this badly!!!

[@Voipknowledge]

Hi, Please download the below file. we.tl/t-ez2VZlS5uE

[@umairmukhtarahmad5917]

Hello, need the xml files. can you please share.

[@Voipknowledge]

Hi, I will share it soon, I will request you to please subscribe my channel.

[@umairmukhtarahmad5917]

@@Voipknowledge looking forward... still wondering if CP series /Enterprise firmware works easily with Grandstream or any other open source asterisk flavor.

[@umairmukhtarahmad5917]

@@Voipknowledge your kind response is awaited.

[@Voipknowledge]

Hi, Please find the below link for xml files. we.tl/t-vtRZysrzpc

[@AchieScottGraham]

How do I set it up at home

[@Voipknowledge]

You need to push the config file via tftp in cisco phone.

[@AchieScottGraham]

@@Voipknowledgehow do I do that , don’t know that much about it😂. just bought the phones and want the 3 phones to call each other . I have a MacBook if that helps 😊

[@ahmedhegab7700]

May you share the files Coz the file is expired

[@Voipknowledge]

Hi, I will share you soon.

[@ahmedhegab7700]

@@Voipknowledge I'm waiting ?

[@Voipknowledge]

Hi, Please find the below file link. Please subscribe my youtube channel as well. we.tl/t-CwQY4up7Ho

[@ahmedhegab7700]

@@Voipknowledge Thx 🌹

[@Voipknowledge]

Hi, please subscribe my channel.

[@ellhnkouvelis6421]

hi please can you send the files please

[@Voipknowledge]

Hi, Please find the below link. we.tl/t-0noSawbW8V

[@ellhnkouvelis6421]

@@Voipknowledge thanks a lot

[@ziyoboboev3611]

Hello VoIP Knowledge can you please share with me the dial plan file for Cisco 7811. Thanks in advance

[@Voipknowledge]

we.tl/t-eGQghqeF7o

[@ziyoboboev3611]

@@Voipknowledge Hello VoIP Knowledge, could you please share with me also the SEP.cnf.xml file for Cisco 7811. thanks in advance

[@Voipknowledge]

we.tl/t-fsnDxBz1oi

[@mujahidzain]

@@Voipknowledge hi, my cisco phone is not showing names in palced calls how to do it

[@Voipknowledge]

@@mujahidzain Hi, you need to set the name on extension side in the IP PBX.

[@jhonclaurecardozo4659]

Nice video! Please share The link agaun is expired

[@Voipknowledge]

Hii, Here is the link. we.tl/t-Ffa0Px0JXI

[@thanhthaoitvlog.2105]

Thanks for the great step by step video. Could you share your config file, please. I am trying to register a 7841 with UCM 6204. I tried the links from previous comments but download link has expired. Thank you

[@Voipknowledge]

Hii, Please use the below link we.tl/t-BMoz0Kguht

[@thanhthaoitvlog.2105]

@@Voipknowledge I have download File and change ip to my pbx and file name SEP{MAC} but my phone can't connect with Grandstream UCM6204 yet

[@Voipknowledge]

Do a hard factory reset and then try.

[@Voipknowledge]

Please subscribe the channel 🙂.

[@thanhthaoitvlog.2105]

@@Voipknowledge Do you have file config cisco phone for panasonic IP-PBX? I want to try on IP-PBX Panasonic HTS824

[@user-mo5kz9oo9m]

Hello, can you please share the config file and dail plan file, once again?

[@Voipknowledge]

Hi, Please use the below file. we.tl/t-y5768cgWsa Please subscribe!

[@user-mo5kz9oo9m]

@@Voipknowledgethank you so much. Do you know if the CP-3905 works like this other model? I have a few of them and I have to try to connect with an asterisk system.

[@Voipknowledge]

Hi, CP3905 will work the same way as other models. You need to modify the load information in the file according to 3905 model.

[@user-zt1el5ud8l]

Can you share the confiq file ?

[@Voipknowledge]

Hi, Here is you link. we.tl/t-wyl7AuYJu0 Please Subscribe the channel!