Reklez 5/9 drop kit installed on a 2009 GMC Sierra

[@turnerway14]

Leaf spring trick is a hell of a tip.. thanks bubba!!

[@turnerway14]

Only works when the bed is off… i was mad as hell earlier when i tried it 😂😂😂

[@gabevancappellen6090]

Digging the Ranger behind the Taco.

[@lowerclassfab431]

We gonna be starting on it very soon the owner has been collecting parts

[@obslife1985]

Night and day difference bro….looks really good!! Keep up the good work.

[@RobertD_83]

Just found the channel and have watched several of your videos already. Truck looks dope on them 24s, great job! After a lifetime of wanting bagged, or at least lowered vehicles I just in the last month dropped my little lancer. Ricer I know, but it looks clean on them little 18s. Now I just need to get me another blazer, or an S10 and put it on the pavement. Anyways, long way of saying I dig the channel and am now subbed. Keep killin it!

[@lowerclassfab431]

Thanks man….they also make air ride for that Lancer that you can bolt on in a weekend….worth a thought

[@jesusmarquez8669]

Looks good, what shocks extenders did he use im looking for some right now and cant find any

[@lowerclassfab431]

Belltech and McGaughy both sell them…you can get them from Summit

[@jasoncroson8466]

Looks amazing, Brother!!

[@lowerclassfab431]

Thanks man

[@debonairkutzz6223]

Looks good

[@jakekelleycustoms]

If you do a flip on this body style without the hanger swap how low would that be? Right now my truck has 2” shackles in the rear how low would just the flip kit leave it basically with factory hanger and 2” drop shackles?

[@lowerclassfab431]

That would be 9 inches total…flip kit is 7 and shackles are 2…you would need a notch, shock extenders and drop shocks for sure

[@Mini_Truckers_Lifestyle]

What would you suggest for a 4x4 gmc sierra i have this same body style and want to lower it

[@lowerclassfab431]

IHC upper and lower arms

[@Mini_Truckers_Lifestyle]

@@lowerclassfab431 how low can drop the 4x4 truck without causing it not to engage anymore

[@johnnysimmons9406]

Hey buddy I have a 2001 gmc sierra I live in Memphis TN. And I been waiting to get my truck lowered but can't find anyone to do it like you so I would like for you to lower my truck so if you would where are you located at and how much do you charge if you would can you send me your # or someway we can get it touch and we can set up something thanks Johnny..

[@jasonnellis3566]

I have a 2014 silverado 1500 5.3L Z71 Lt with 3 in drop. 2 in drop spindles 1 in drop springs belltech set at 0 drop. It bottoms out. Plz help anD how do you get ride of Chevy lean on drivers side. I'll send pics if you need too see it thnx.

[@texasmike7994]

Question: I have a 2011 that’s lowered 2/4 I want it raised back up, rear is flipped with rear hangers and shackles, can I put a stock hanger and shackle to raise it up some without new leafs back on top?

[@lowerclassfab431]

No that will actually lower it…if you go back to a stock hanger and shackle that would be a 7 inch drop

[@christiancastro3382]

Do you need larger u bolts when doing a 6in flip kit with 2in block in the back , if so where can I find some for these model trucks

[@lowerclassfab431]

Yes you can get them at local Oreillys

[@christiancastro3382]

@@lowerclassfab431what size u bolts would you recommend for 10in or 11in rear drop ? I see there is 10in long u bolts or 12in long

[@lowerclassfab431]

@@christiancastro3382 I'd get the 12s and cut them down if need be

[@carloscabellero4661]

Right on truck looks sick so I have a question I had 2/4 drop on 2010 Silverado but I want to lower rear to a 6 inch drop would I just have to get 6 inch drop hanger?? And for the front I have 2 inch spindles what can get me 1-2 inch more of drop

[@lowerclassfab431]

Change the rear hanger to the 6 inch setting with a stock shackle….front will need a drop strut

[@turnerway14]

Also, what drop shock is available past 9” of drop? I wanna end up around 10 or 11 inches.. maybe 12”

[@lowerclassfab431]

Do the drop shackle to get to 9 then do a drop block….you can get a set made to use with a flip kit from Trick’d Toys on facebook

[@turnerway14]

@@lowerclassfab431 yeah man i remember the TT blocks from one of your previous vids. I’ve got the same street performance shocks as this truck. Will a shock relocation prevent the shocks from bottoming out once i go shackle and drop block? Don’t mean to ask a bunch of questions, and I’ve done some research on my own, but i don’t have anybody with a lowered NNBS down here in Savannah to get a definite answer from.

[@lowerclassfab431]

If you do a step notch and move the upper mounts up it will work but just the shock extenders are only good for about 9 inches of drop with those shocks

[@turnerway14]

@@lowerclassfab431 hell yeah thanks for info brotha

[@DarthRaider501]

Can I go lower than 7"' in the rear without a CNotch 07 Sierra 1500?

[@lowerclassfab431]

No 7 is pushing the limit

[@CarlozRuiz-xv5kb]

Was it 1pc or 2piece driveshaft?

[@lowerclassfab431]

One piece I had to notch gas tank crossmember

[@ramiromartinez3588]

Hey boss wer do you put the trans spacers??

[@tomasinfante77036]

On that drop trucks. Don’t you need to put a 2 piece driveshaft on then ?

[@lowerclassfab431]

You have to build a crossmember for the carrier bearing to sit on

[@urielrodriguez7172]

@@lowerclassfab431i have a 2008 silverado extended cab and i have just a flip kit would i need a 2 piece drive shaft if i install 2 inch lowering shackles

[@lowerclassfab431]

@@urielrodriguez7172 you should be good….this truck had a factory driveshaft…you will need a notch for sure

[@urielrodriguez7172]

@@lowerclassfab431 thanks man for helping 👍🏼

[@MrRodriguez918]

So if i put it on the top hole on drop shackles with a flip kit notch shock extenders, what in drop would that be and would it be fine? I got a mcgaughys 5/7 adjustable kit

[@lowerclassfab431]

Flip kit alone is 7…add shackles in top hole that would be 9…you will definitely need shock extenders and a notch

[@MrRodriguez918]

@lowerclassfab431 It's rubbing in the front I dropped it no rings. What can I do to help it not rub when I turn

[@MrRodriguez918]

It's also rubbing in the back wheel well. Would you recommend me do tubs or just buy regular shackles and put it at 7 in in the back

[@lowerclassfab431]

@@MrRodriguez918 pretty much all these trucks if it’s lower than 7 in the rear I do wheels tubs in the bed unless they are running small tires….what size tire are you currently running?

[@MrRodriguez918]

@@lowerclassfab431 22s

[@aaronzavala4336]

Hope you or someone in the comments answer my question do 2006 spindles fit my 08 I already ordered and I’m stressing about them not fitting

[@lowerclassfab431]

No they aren’t interchangeable

[@aaronzavala4336]

@@lowerclassfab431 they look identical to the 08 ones but I can be wrong now I gotta wait for them to come in and return them

[@cmonreyna]

i wish i can know where he got all the parts

[@wavyyirvinyt9774]

What happens if i drop my crew cab sierra on a 5/9 with a stock drive shaft

[@lowerclassfab431]

It’s gonna rub and eventually it will break

[@frankdonta853]

@@lowerclassfab431you think it would still rub with the crossmember notched?

[@lowerclassfab431]

@@frankdonta853 you can always go this route…I’ve installed these before….nice clean results www.trickdtoys.com/shop/p/1999-2018-chevy/gmc-driveshaft-crossmember-notch

[@Hilarious1972]

How much did you charge him?

[@lowerclassfab431]

$500 labor he supplied the drop kit

[@Suckonsum]

Is it 4x4

[@lowerclassfab431]

No its 2wd

[@carloscabellero4661]

So on the shackles which hole gives you lowest drop?

[@lowerclassfab431]

Top hole gives most drop