RELEASING My FEMALE BETTA FISH for BREEDING... Success?

The betta breeding process is looking promising so make sure you're subscribed!
Make sure to like and comment down below if you want to see more of these videos and stay tuned for more tank/aquarium and fishing videos! Thanks for watching, don't forget to
subscribe and turn on the post notification button, so you never miss an EPIC video! Thank you all for your support!
SUBSCRIBE TO OUR CHANNEL HERE: www.youtube.co....
SUBSCRIBE!!! WE POST 4 DAYS A WEEK!
PREVIOUS VIDEO : www.youtube.co....
FOLLOW US ON INSTAGRAM: @barbsbuzzin / barbsbuzzin
For business inquiries only: [e-mail]

[@258johnpg]

Hello, I'm a Brazilian fan and I would like to give you guys 2 advices. 1 you should drill holes in the female's bottle so that pheromones can be felt. 2 Place items floating in the aquarium, such as a sheet or plastic, in order tô help keeping the bubbles. Good Lucky, and never give up

[@keels5075]

before you breed the flower horn make sure you have three HUGE tanks

[@zayaanzaheer5833]

Yea you may go overbord

[@PULAG]

I got a huge tank...

[@bassnbucks3238]

Awesome love your aquarium just recommended my friend to this channel because he has a huge fish tank!!

[@stephengrice3098]

Put wire mesh on to some wood and then put the feeders on the wire mesh and then if the shavings or poo go on the wire mesh it will go through the wire mesh.I love your videos I watch them everytime you guys upload

[@charlottedavis9769]

You need to raise the water level a lil.

[@gemasnicket1817]

Yes TRY FLOWER HORN BREEDING

[@amandabudgets7485]

For your feeders and waterers, put them on a small block to lift them up.

[@gabbynaclerio4132]

You guys should do some guppie breeding 🤷🏽‍♀️🙏🏽

[@sadielawson1375]

Gabby Naclerio that moment when you don’t want to tell them betta breeding is too complicated for them 😂

[@gabbynaclerio4132]

Sadie Lawson ya I think guppies are much easier and a good starter breeding fish 😂🤷🏽‍♀️

[@marymackey6899]

For your watering dishes in the coop, trying elevating them a couple of inches, like using a pan upside down and set the watering dish on top.

[@emisthem6562]

Never seen people more excited about fishes mating

[@madisonsonju2903]

Hang the water from the ceiling of the chicken coop so it hovers like an inch off the ground, helps less stuff get into the water. You can do it with the food too!

[@yupitsmary3943]

You can hang the water container not to high from the floor so they can still reach the containers and don’t make a mess on them

[@miguelangelarias8741]

2:35 Yesssssssssss Hell yessssss

[@chrschrs7514]

I’ll say yeah definitely breed the flower horn if I can have one of the babies

[@sameeressack8868]

Yes. Would love to see you guys try flowerhorn breeding

[@babym00s]

ive been waiting for this yessss

[@PULAG]

Feel like the water should be deeper?

[@preslynnlott3955]

Hey I just want to tell you that your male crowntail betta has finrot and it isn't the best decision to breed him again and it wasn't safe to breed him now but you did so 🤷🏼‍♀️ but you should probably treat him with a medication call betta fix or some stress coat

[@emmyburbank416]

Yes!!! Do it

[@carlyosorio5900]

Yes put something under the waterers. Like a brick or an upside down bowl

[@haleyscharf657]

Put the feeder up on a brick or look up diy ones that hang

[@savannahcrane2062]

you might want to get them more room in there because i have 6 at home and they have a 12x12 shed and if you don't they will start to pluc them selves and eat there eggs .and use layer food it helps them perduse more eggs

[@leabhraskehoe8683]

Get straw istead of sheeding and get a bigger water and feedear

[@wilburn_]

Jack, you hang the feeding things for the chicken .

[@santoroaquatics5038]

2 comment awesome video Barbs buzzin keep up the great work love seeing your amazing fish love your Betta fish to

[@leamari6003]

What first feed betta so dey konnot eat thier eggs

[@delvengeancevengeance7077]

Water level is very low..you need to add more water..

[@nothsalfa6146]

I am excited about arnold breeding i can't wait!

[@neildutoit2819]

Ya

[@jennk5658]

He'll yea try flower horn breeding, but I want one lol. Good luck

[@jerrymerritt6869]

Love your vids

[@Wanasaechao]

Yess flowerhorn breeding

[@cassie1452]

6:25 wait did you call him baby? OoohhHhH~

[@miguelianmiranda9158]

They have Different tailtype. The fry will most likely be cull

[@finthomas2450]

Put a tile underneath the feeders it works

[@patrickdurso9746]

Do the flower horn breeding!

[@swaswa9887]

What are you going to feed the betta fry?

[@silver7529]

You should breed flower horns for sure!! Awesome content, keep it up! You guys inspired me to breed bettas myself, and I'm up to 5 tanks, it's awesome thanks for the inspiration!!! :)

[@jereworldwells9630]

yes yall betta cute ❤❤💙💙🩵🩵🩵

[@legend9271]

Nice channel

[@discoverorthodoxchristiani5341]

put a platform on the feeder so they can only stretch their necks and cant really go on topof the feeder. This will prevent any shavings. Bigger the BETTER

[@brandonhuisman4351]

Raise the water and feeders. Hanging them is the best

[@jessicafishman2654]

I love your Your videos Watch All the time

[@fcasillas3963]

Put food and water trays on a brick so shavings wont get thrown in when 🐔 scratch

[@lyn7310]

I put a little wood block under the chicken water

[@colinchurchill4147]

Could put the feeders on a flat rock to be higher so they don’t get so dirty

[@helenleilis6358]

try putting a cinder block under the water bowl

[@abdulwaheedouabihi5903]

Put a foam cup on top of the bubble nest

[@corib2025]

Happy beta breeding

[@mattewsuarez7590]

They do that all the time

[@harryrutland875]

If you hang the feeders just a little ways off the ground it wont get as dirty

[@jereworldwells9630]

yall must be animals lovers collectors yall have like every pet

[@tarynahlborn9193]

the male betta has fin rot

[@valerieanimagus6230]

No that is one of the fin styles that Bettas have. Check around online it's completely normal

[@PowMackGaming]

No it does appear to have fin rot. Currently treating a crown tail for it and it looks the same as mine. You can see in the mail part of the back fin that it is short from loss. He needs to be treated with aquarium salt.

[@bowzerrbills2569]

Not fin rot but he does have tail loss from stress or fighting he is a crown beta so that crown pattern is normal

[@PowMackGaming]

Bråndøn Got thė grėėn light How do you tell the difference? I’m currently treating a crown tail who had fin rot when I got him. And he looks almost identical to their betta, minus the color difference (my betta is solid white). Either way, treating him with aquarium salt will help with regrowth as well and he should probably be treated, I read that fin rot and fin loss is painful...

[@bowzerrbills2569]

Emmybugz6 Games usually the tips of the fins get darker than the normal fish color, Beta fish usually have a stressful life before finding a decent house and tend to lose their tail I’ve found the best solution is to give them a tank with a lot of space with aquarium salt in a really dark spot they tend to flourish in those conditions and grow a lot of tail

[@vinayagasamy7015]

yeah bring it on flowerhorn breeding

[@ahsankharbai]

Get Arnold a female vieja synspilum or a golden base flowerhorn female

[@brycegrossen3476]

And if you have a peace of like wood like a higher raised wood put both on one

[@Crystalspets]

There are goi g to make beautiful babies thats for sure gorgeous betta parents hello chickens and bunny

[@maddyl5691]

Bettas should be in a minimum 2.5 gallon tank with heaters and low flow filters

[@sienahtucker7724]

they dont need heaters and they should be in a 5 gallon

[@henryb1998]

They do need heaters

[@JoshJ1563]

Well they do and don’t need heaters if your weather and house is close to their recommend temp depending on weather you want a warmer water for breeding or regular temp it honestly doesn’t matter their in florda so the weathers hot a lot but also cold a lot so a heater would only be recommended

[@jereworldwells9630]

they a very beautiful bettas

[@elytricshark8718]

When will there be the next video because I am trying to Breed my betas to

[@geneezch7197]

Late squad and I was waiting for this video lol

[@vamtv7501]

Bro. What if I send u bettas? How would I send it to your place?

[@iverywilliams2533]

Put something that is a little thick to put under the feeders so they can't get shavings in it

[@debanana7992]

Gary is the wingman

[@jesyckasmith8595]

So did you never try to breed Ares again? I feel like Mooey was his breed coach.

[@irshaadjaffer7065]

Flower horn breeding yay

[@PokeGummy]

Y’all gotta like this video Arnold needs a baby girl!!!

[@austin_smith240]

Just get like a small dog bowl and put rocks in it and fill it up with water so the chickens don’t drown in it

[@addyrose3173]

For the water I put it on a brick and it semi helped with the mess

[@Tweaklys3171]

BREED THE FLOWER HORN!!!

[@wolftimeplusguineapigs3862]

Aww I liked 👑 beta

[@babym00s]

I CANT WAITTTT

[@kentuckyfarmer2192]

You need rise the feeder up off ground

[@babym00s]

OH MY GOD

[@diegogonzalez5294]

You should put the water on a brick or on something above the ground

[@monochromaticbullet190]

glad we can all agree that the feeder/water things for chickens SUCK

[@alexklima5225]

Jack should get a mullet like so he can see

[@maryelleburgos7977]

Hi I love you guys

[@joshandtrevorfishingadvent8133]

Great video like always 😎 👍 Notification Squad 🔥 I'm gonna be breeding Angelfish on my channel lol 😂

[@chito6203]

Sit some bricks down under the feeders this way they are not sitting directly on the floor. This will help the chickens/animals from kicking the shavings into the water bottles and feeders.

[@amyfrye3419]

What would be some reasons that the male betta doesnt build a bubble nest

[@jenzilaguna6078]

i think you guys should bread the flowerhorn

[@kathrynhernandez734]

You hang the feeders a little above the ground

[@NaturesWhim]

Lets spread the hobbies guys =)

[@lisardohuertajr1236]

Have a similar beta fish to the male but female version

[@dtaquatics7392]

I've got a proven female from when I was breeding that would work for Arnold

[@wcrow51]

Y’all should’ve waited till the bubble nest was fully formed. It was very loose and it will not hold eggs.

[@franznapoles9117]

Will Crowson they should put almond leaf to hold the bubles together and make the water quality good...

[@hhfh6679]

breed the flower horn!!!

[@TequilaMami]

Can you guys breed wild Macrostomas betta

[@stoneymoey5115]

Put a flat stone under the feeder and water

[@pappy9523]

Put the feeder and waterer higher up

[@dogandcat3672]

The best way to keep the food and water clean is to elevate it. Put a brick under them or tie a string and hang them. Also, you can switch methods and use a gravity-based feeder and a... the name might sound weird but it works... water nipple drinker. Like this -> www.amazon.com/Automatic-Chicken-Drinker-Feeders-Poultry/dp/B008AZTHNS Also, I hope that you know how to care for parasites. I have been raising chickens for a while and they require a lot of care.

[@neetaramsay3252]

Dog breeding of a flower on fish also

[@gavinjacobs685]

Breed the flowerhorn that would be so sick!

[@aceskeeter8549]

You should do turtle breeding

[@bluelinetropics8614]

If you get the flower horn to breed I want a male. I'll pay for shipping

[@Tweaklys3171]

Florida Aquarium Creators Team lol

[@bluelinetropics8614]

I already have a tank setup for one. Nobody has them around me

[@bluelinetropics8614]

I will if thay ask too

[@novabreyers]

Im going to be breeding my bettas soooooooo yah

[@amberkaiser695]

I liked and subscribed

[@soflobassin4752]

Jack HMU I stay in broward county and breed Bettas aswell, no snail also too much of a distraction for the bettas

[@nicolenejoythe7652]

Put a brick under the feeders simple as that