Remove and Rebuild front carburetor 1986 Suzuki Intruder vs700

[@ironskull60]

just got done rebuilding the second carb and guess what i did !?forgot the MOTHER F....G spring !!! was laughing my ass off in the garage for about 5 minutes thinking about your video and the comment i made lol!

[@garybussy1035]

Very straightforward and in-depth. Thank you!

[@freemarketjoe9869]

Hey! I like the magnets making the screw driver magnetic. I have to try that. I have to do this myself, so this is great!

[@MrCbell57]

I guess people don't realize there are a dozen key functional components here that need to be addressed when cleaning. The carbs have 50 plus parts. Not 3. Great video.

[@dannyhertenweg8663]

at 22:30 you forgot to put the Spring back with the membrane

[@iliaortho]

That is great. Thank you gentlemen.

[@orelygarcia]

Your welcome.

[@djfunkycraig]

Good vid mate, it’s funny, I’m helping my dad with the same model bike atm!

[@djfunkycraig]

This helped us heaps and good on you and ya boy gettin into it!

[@thekingsilverado9004]

That air tube on top can be a real bitch to get to back in place and seal as easy as it seems and looks it ain't..

[@orelygarcia]

Yes sir, one time after 15 minutes I had to walk away from it or I was going to start throwing wrenches. I came back later after a cold beer and it slipped right in. Thanks for watching and commenting.

[@randall1959]

You should go on ebay anb get a tool magnetizer. Worth every penny. You can magnetize a tool when you need it and then demagnetize it when you don't. They're pretty cheap.

[@Sanjeewa_Perera]

Nice Video

[@orelygarcia]

21:53 i forgot the spring but I installed it later

[@bayshorepark1231239]

I saw that and kept on waiting for you to put it in but you never did!

[@thomasmcmullan4223]

✨✨✨✨✨Thank you friend ❤️☘️☘️❤️👍👍

[@thomasmcmullan4223]

👍👀👌✨✨✨Thank you friend ❤️☘️☘️

[@723kiro]

Thank you!

[@orelygarcia]

Your Welcome

[@SimplestcreatureOnEarth]

Remove and Rebuild front carburetor 1986 Suzuki Intruder vs700

[@quinnsmithy8778]

could you put a link in the desc. where you bought that carb rebuild kit? i can't find the right one for the life of me

[@orelygarcia]

Sorry, I took so long to reply it was ether Amazon or eBay.

[@quinnsmithy8778]

@@orelygarcia oh i see, thank you for replying :D

[@bryanjohnson7508]

Why no carb cleaner in the bowl or anyting before you put all the float seat and needle in there

[@orelygarcia]

You could use carb cleaner if you feel it needs it.

[@ДимитърМаринов-МФ]

Hello How to adjust air screw ? How many turn in / out should I do

[@orelygarcia]

I do not know exactly but as a general rule. I close it all the way then open it three to three and a half turns. Be careful not to close it hard where the tip of the adjustment screw might get damaged. This rule has worked for me on motorcycle, car and lawnmower carburetors. It should be good enough to get is started. You can adjust it richer or leaner after getting it started. Good luck and thanks for watching and commenting.

[@ironskull60]

The spring!!!! Lol

[@trevorkristoffersen4447]

HELP!old post but trying to figure out why my rear carb is leaking fuel into the air filter

[@orelygarcia]

Can't say for certain but, probably a stuck float.

[@chuckd366]

Can you tell me the linkage on the front carb is the main peace behind the or in front of it I think mine was put together wrong when I give it gas the smaller one does not move at all I think it is wrong can you look at yours and let me know.great videos keep it up .a fan.

[@orelygarcia]

It may be one of your throttle cables is broken or has come loose at the Y connection, look Where the 2 throttle cable become one. Open and inspect it. You need to remove the tank to see it.

[@sapocopion]

hello ..what is the valve clearance used? and how many turns in the air screw in carburetors?

[@orelygarcia]

Sorry I do not have the answer to that question.

[@josephgough7404]

Link to where you got the rebuild kit?

[@orelygarcia]

The part number is in the video, I got it from Amazon if I remember correctly. Just do a google search for the part number. Thanks for watching.

[@rauldelosreyes9909]

Where can i get the throttle and choke cables?

[@orelygarcia]

I went to the parts catalog at suzukipartshouse.com got the part number and shopped around on line, ultimately I found the best price on ebay.

[@stevegriswold4695]

It looks like you forgot to put the spring back in to the diaphragm mechanism on the bottom of the car

[@stevegriswold4695]

Carb

[@renegonzalez4238]

Left the Spring out

[@ASTF11]

you just forgot to check the float level !!

[@chuckd366]

DUDE YOU LEFT THE SPRING OUT.

[@orelygarcia]

I did, had to remove the cover and put it in. Your the first to catch that. Thanks for watching.

[@SERB98]

I think you also put the diaphragm cover on wrong 90 degrees clockwise. The groove in the cover goes over the little hole.

[@orelygarcia]

I got the old timers, can remember what i did 2 minutes ago but we managed to get it working with out paying 125 an hour to a shop. thanks for watching and commenting.

[@orelygarcia]

If there is parts left over you have to go back to square one. But every time you do it over you get better at it . Thanks for watching and commenting, hope it was of some help.