Repair Those LEAKY VALVE COVERS With This Simple Method!

The Jade Interceptor is back! In this episode Aaron shows the best method to repair those leaky valve covers for good! This method will work on any vehicle that uses cork gaskets to seal the valve cover to the engine cylinder heads. Remember to let the sealant to cure overnight and enjoy the show!

[@DentsideDepot]

This is a simple job that can go horribly wrong and become a real headache if its not done right. How do I know? Because I was that guy in the past that screwed it up bad, so watch this so you don't have to be that guy!

[@glenndoherty6864]

I have ford motorsports aluminum valve covers on my dentsides with rubber gaskets, studs and Moroso wing nuts. Never had a problem yet. You have great trucks.

[@DentsideDepot]

I have heard mixed reviews on them, but yes if you're doing aftermarket that is probably the way to go . In my experience, this is the best way to do it with the factory valve covers. Better yet to add the ARPs for sure. Thanks appreciate you watching!

[@phantom0456]

My buddy Cheezus Rodriguez has a dentside with a bed cap and he lives in the back with a sleeping bag and a foam roll… he straight gangsta like that! He Scags by day and sleeps in the bed by night!

[@treepviews9004]

It’s like your in my garage…I just got a 78 f150 …my first dentside…I have to do this job soon…I am working on replacing all dry rotted rubber in steering system now…love your content!! ….please keep it up!!

[@DentsideDepot]

Awesome! Thanks for the feedback and good luck with your build!

[@roberthahn3710]

That’s what we used to do 40 years ago. Well done!

[@craigl5202]

Thanks for doing those valve covers Aaron! Nice video 👍

[@DentsideDepot]

You got it! Shes a sweeeet ride.

[@Inyourhideyhole]

Sweet filter 😊

[@dajonczy427]

Nice job, but I can't believe you didn't paint the valve covers while they were off 😊😊😊

[@roberthuskey4775]

I am doing 460 swap with a 4 speed manual transmission the old np do u know if a 390 flywheel will work?? If not what flywheel do I need

[@DentsideDepot]

I am fairly sure that will not work but I am not 100% certain to be honest.

[@roberthuskey4775]

Do u know what flywheel will work my 460 is the a 77 year model

[@DentsideDepot]

I would just order a flywheel for a 460, all the blocks are the same in terms of the flywheel so it shouldnt be an issue@@roberthuskey4775

[@roberthuskey4775]

Ok thank you

[@DentsideDepot]

np@@roberthuskey4775

[@SteveVi0lence]

Can you install a custom bumper made from an old section of railroad track? 😂

[@bretz71]

Did you buy that truck from Junkyard Mook?

[@joshuaatkins5197]

Those aren't even the hard ones to seal. Try an FE where the intake is part of the cylinder head.

[@Iowa599]

If you use JB Weld, instead of gasket goop, it will seal without the gasket or bolts!

[@captainschannel9331]

😎🏴‍☠️