Frigidaire Laundry Center Disassembly (FFLE3900UW1)

[@ieatcrayons1999]

Absolutely the BEST demo video I have ever seen on any product you guys knocked it out of the park on this one

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@traviscole7069]

Such an amazing demonstration. Step by step. You guys doing this company a favor for doing this.

[@DonaldChristineChamberlain]

This is a good demonstration. For the washer compartment however, @ 7:30 our model did not have the clips in front that pops the top but was screwed in place from the inside. Eventually we figured out to get the front panel off by removing the bottom two screws and sliding the panel down, which the demonstration showed. We then replaced the drain hose. Thanks

[@abigailadkins1862]

Very helpful info ! I thought I was crazy an just couldn’t do it. 💀😂

[@SammyTrylinski]

This guy has helped me fix my dryer so many times by myself!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@steveweisner]

Crystal clear details (at least for the dryer steps that we needed). No idea why, but the drive belt had come off. This video was exactly what we needed. Thank you.

[@rogerpotter7695]

My belt is off,but not broken. Best to just replace it,right? Can I get it at Home Depot?

[@steveweisner]

@@rogerpotter7695 I wouldn't bet on finding this kind of part at Home Depot. You'll likely need to go to an Appliance Parts specialty store with your model number. (I'm not a pro, so take this next comment with a grain of salt.) If it was me, I'd try just slipping it back onto the pully system from the back of the unit in the hopes that you don't need to fully replace the belt. This is much quicker/easier job than replacing the entire belt and it will be good practice if you do eventually need to replace the belt.

[@Ghillieye]

YOU GUYS ARE AWESOME! I could not figure out how to take the front cover off. Thanks so much for this! I was able to fix my washing unit today because of you! (A sock had made it into the drain pump!)

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@joeo8820]

Great video!!! It saved me from buying a new all in one. My dryer drum stopped spinning and I found 2 screws inside the drum when unloading my clothes. Issue was...screws that holds the drum to support bearing came loose from inside and the dryer belt became loose. It also came me a chance to vacuum unseen inside of the dryer. It's a fire hazard if it catches fire :(

[@ChristianDoan7935]

This is the only video online that shows how to take apart this appliance please make more of these

[@ChristianDoan7935]

I have no idea how to open this up to get to the heating element/igniter

[@ChristianDoan7935]

Ah I have the 120 I ended up figuring it out but from Watching your video I guess I unhooked the drum stop and never took the panel off to put it on I didn't know what it was lol

[@raynieves2243]

I had a broken suspension rod that caused the washer to be unusable probably for the holiday season. After watching this video I had the confidence to order and install the part myself at a fraction of cost and time. Excellent video production. Many thanks!

[@aujla23]

Where did you order the suspension rod/spring from?

[@billysturgis]

Thank You. Your video helped me to find the pulley and reattach the belt. All it did was slip off.

[@williamcalderonj4551]

Excellent video, from Venezuela, grateful and from a distance, greetings.

[@darienclark4333]

What is the part number for the drum stop?

[@8marluna]

Thank you very much forvthid video. Excellent demostration. ❤

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@dionwebber708]

Thanks for posting this. I needed it to diy fix my machine.

[@joserobles9694]

Thanks for the video friends

[@repairclinic]

You're welcome! If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review Have a great day!

[@billysimmons2432]

be great to know where the service manual is kept in these. not in the traditional location on inside wall. trying to figure out how to disable the end of cycle alarms. so annoying

[@DodongOliver]

What's the part number of drum support the small black part? Please send to where can I buy the replacement drum support. Please thanks

[@Chronix74]

yes bros! saved my butt! was able to get the dial situated back after the control board behind it popped out into the machine.

[@MeticulousTechTV]

Hi! Great video, I’m to the drum removal part and it won’t come out! Mine is a Frigidaire but an older model. There are screws inside but I’m afraid to remove them without know the repercussions Edit: model FLEB8200FS0

[@josemilian4167]

excellent thank you. can't remove main top don't think mine comes apart like in this video for some reason. would have been cool if sheet metal was notched or something for when you need to take in apart.

[@josemilian4167]

I figured it out. mine is definitely different the front panel has to first be removed and there were 2 screws that had to removed 1 from each side.just in case someone else was struggling when watching the video.

[@jbpost52]

where do you get that plastic drum stop which was removed. It was at the top when you removed the front door panel it keep the drum from falling forward.

[@AR-cp5dz]

Seems impossible to find.

[@robinnicolson6522]

Hi How do you take the adjator out if clothing is stuck

[@johncalvo1743]

Thank you for your video. I need to replace a drain hose. I guess I will have to remove the rear lower back panel? Do you have a video for this?

[@ronaldrissel6665]

If your machine is like this one, the back panel does not come off. Instead, you need to lay the washer/dryer down, preferably on its front so you can have easy access to the drain pump from the bottom. Note: you may not have to lay the unit all the way down; maybe just a 45° angle will give you enough room to get to the drain pump.

[@pmizell23]

My FFLE laundry center has a bottom to it so I guess I'm outta luck removing the drum. A shame too because this is an excellent video. Thanks

[@AKGagliano]

This helped a ton today. Thank you!

[@nipcee8865]

Excellent video 👍🏽...I have a question?where can I find the tabs that connect the the front of washer...I have 2 that are broken and would like to replace please

[@haroonhassan3064]

Good video .

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@Captain-Palsy]

Hello, Do you have a video on how to replace the button on the dryer unit I have the basic model of the exact one in the video.

[@Sabanator1969]

Thank you for the videos!!

[@Juangonzalezbernard1963]

Good morning, please, how can I reset my Frigidaire Washer and Dryer model FFLE3900UW?...... The dryer won't start. Thanks

[@pfguo87]

Thank you for the video!

[@pepmaster2004]

I have a unit exactly like this one and my dryer all of a sudden doesn't turn on and no beep when pressing the knob. I want to troubleshoot it myself. Any recomendations?

[@chriscavender9482]

I have a combo unit with non starting dryer. I have disassembled to check fuses, etc but have been unable to find problem. Can you assist me with that?

[@markandrews7116]

Huge help thanks so much

[@jennyvieve9108]

I have a ge laundry centre that looks similar to this set up. The washer makes a sharp, loud squeeking noise when it's on the wash mode (when the drum agitates the clothes). Do you have any idea what might be causing that noise and what part I would need to replace? Thanks for making this video!

[@theuglypenny]

I’m having this problem now. It is the tub leaking into the bearing underneath causing the noise. Good luck getting it fixed

[@MichaelWilliams21302]

Hi I’m watching this video because my washer is making a humming noise when I start it , but it does absolutely nothing it doesn’t move or fill with water it just makes that noise. I felt the noise was coming from the drain pump should I replace that?

[@aiskelfranquiz7526]

Hello good night, I activated my washer dryer and when it was going through cycle 4 it did like short circuit explosions it stopped working and now it smells like burning. then I put the dryer

[@kzli4272]

Thanks for sharing.

[@athenahepp9100]

Off topic question that you folks may have an answer to: I have a Frigidaire model almost exactly the same and it's just terrible. Soooo much residue. Yes, I'm using the correct detergents in the correct quantities and I already tried the washing machine cleaning tablets.... Question is: HOW do I clean this thing properly? How do I get it to stop leaving white residue all over my clothing? Please help 🙏🏻

[@maxrivest7111]

Same problem here 😭😭2️⃣

[@nostradamus2507]

Hi Repair Clinic, I just came across your page and am really thankful for the information you have made available. Would you be able to tell me where the thermal limiter/fuse is located in this unit? All the best.

[@dank610]

Agreed, where is this?

[@ddsutube645]

Hi Sir, do you have the Kenmore brand disassembly... Needed it so bad to repair my washing dryer machine. Hope your reply soon.

[@ChristianDoan7935]

So I used this a year ago but now I need to get under my washer to my water pump my washer has a plate on the bottom that I csnt removed all models of this kind in your videos are missing thr bottom plate

[@rodc5306]

Thanks for this video! Can anyone help me find the part number for the drum stop at 4:31? I have been searching online and cannot find it... fixed my dryer but noticed it did not have a drum stop during reassembly, it’s still noisy when it spins.

[@Sabanator1969]

I am looking for this part also and have been unable to locate it.

[@salde386]

please what is the part number for the drum stop,it's not on any of the look ups why

[@cynthiav1107]

What can I do about water that stays inside? We have already disassembled it and try to take the water that is stuck. It smells awful like rotten eggs bt it will not come out

[@krisamontoya]

is it possible to remove the dryer all together and replace it?

[@nickb6849]

What about to move it? Is it easy to remove the dryer from washer and move separately?

[@antoniosmith6772]

I am trying to replace the motor of the laundry center dryer. Do you have a video on that?

[@antoniosmith6772]

@@repairclinic thank you so much!!

[@_Beezul]

I just want to know how to clean the filter in the washer :/

[@Juangonzalezbernard1963]

Please advise.... Thank you

[@neilamantetv1376]

What is the belt size??? Please.. thank in advancr fof the answer

[@carlosavila7093]

Necesito desmontar perilla de encendido de Frigidaire Heavy Duty

[@chadtaylor6789]

My frigidaire washer/dryer unit is spinning slowly during the spin cycle. I'm gonna check the belt's condition but usually from your experience with Frigidaire, what would it usually be?

[@rodolfopolanco8140]

Posible causas resistencia Quemada, termo disco, time drin

[@linalightning]

Fantastic video, thank you. Anyone know how to disable the obnoxious buzzer when the clothes is dry? Having this model in a small apartment causes a near-heart attack each time it goes off 😅🥴

[@artalcoolique3341]

This is probably late but there is a mute button on it I think.

[@aiskelfranquiz7526]

Then I put the dryer on and it worked, it blew like the washer, it started to smell burnt but it kept working. I turned it off for fear of a major short circuit at home.

[@norfhabaladek1520]

Why not stop filiing the water...??? Can u help me?

[@rogereverage5665]

W Hat size Is the dryer belt?

[@paulgross22]

Do you have to remove the drum just to replace the belt?

[@cristianflores2351]

No but you gotta remove the dryer door and loosen the top and you’ll have access to replace belt

[@DanhNguyen-sf8zo]

Can you help me that my Frigidaire laundry will not spin cycle after washing cycle done, it started make sound click click and the lid lock star unlocked. Thanks

[@justinb9365]

Did you ever find the problem?

[@38RS]

I took the dryer door off because there was sand and dirt built up inside and there’s a piece of cardboard in there- -anyone know if that is that supposed to be there??

[@manuelsantos9143]

What size V belt for drier

[@joanmacgillivray4682]

My washing machine will not start. I push the button again and the pause button displays. I am not able to get it to start washing?

[@rodolfopolanco8140]

La resistencia no calienta de mi lavadora frijidaire Que debo hacer

[@joshuaemerson6542]

I have this same model and from some reason the washer won't turn on. Dryer runs fine but the washer won't start anybody have any suggestions.

[@James_m7]

Looking for a new set of compact washer/dryer apartment... is this Frigidaire set reliable ?

[@bejeweledjamie13]

i have it at my apartment it came with it. i would personally choose something else

[@27Dupree27]

It’s horrible… not reliable at all.

[@YouTubeStalker]

I washed 100 dollar bill in my pants the dried the pants and money is somewhere in the washer or dryer. . Where would a folded up bill end up and how to I search for it in the stacking set?

[@YouTubeStalker]

@@repairclinic thank you so much I will look there :)

[@rogereverage5665]

Belt size plezzzzzz

[@karenphillips2520]

Water not coming into washer?

[@victormota1213]

Anyone know how to mute the machine

[@abulkhair6604]

Me be this model is new my hav ould model but i didnot now model i was finding gear box and maen swishe

[@iamthepapi6251]

I had KZbin ads so much. My god I hate it. You're forcing it on us. We click something and then you force something else on us that we don't want to watch.

[@evelynrodriguez7233]

Compre este equipo los ratones se comieron los cables en menos de un mes daño la targeta.

[@Juangonzalezbernard1963]

The technician is saying that he has to STOWER (erase the memory events in the micro inside the mother board) by using a JIG apparatus... But I don't trust him...

[@barbievold-bowd6151]

how to remove the back of the max=chine

[@marcorojas2444]

my dyer turns of after 5 to 10 seconds

[@franciscovasquez9781]

Check thermal limiter on the upper rear left of dryer, you may have to remove drum, if it is open , replace it, then make sure duct vent is clean.

[@timmagera8120]

useless to me , cant get front cover on..........

[@ChristianDoan7935]

Man I just want the fucking heating element

[@HaileyRivera.]

Somehow my hamster decided to get stuck inside my washing machine and now deceased I’m stuck having to find the remains 😐

[@repairclinic]

Oh no! That's so sad. Poor hamster.

[@HaileyRivera.]

@@repairclinicyeah it looked like she passed painfully.. she was resting on top of the plastic piece that is over that spinning motor thing. I had her since she was born so it was hard to process.