Repairing A 2019 Crash Damaged Salvage Nissan NV200 Panel Van PT 2

SRUK Merchandise :- www.stadiumsports.co.uk/club-s...
Instagram for daily sneak peeks :- salvagerebu...
Welcome to the Salvage Rebuilds UK channel. In this video we make a start on repairing the crash damaged Nissan NV200 panel van Non Electric EV BEV Hybrid
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Sand Blasting , Engine and Mechanical repairs , DPF cleaning , Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , Repairs , Salvage , Restorations , Will it run , Fail , Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , Flood damage , insurance write off , fire damage , smoke damage , electrical fault , stolen recovered , Unfinished project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Land Rover , MG , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video

[@sruk]

Sorry forgot Jerry’s 👍 www.google.com/search?q=jerry's%20sittingbourne&tbm=

[@kerbsiderecycling2694]

Top man Jerry

[@sruk]

@RR PLAN C it’s just a piece off of the focus next to it

[@thefamilyrobbo]

Ordered a small tin of paint from this guy but, unfortunately, received a Jerry can 🤣

[@aljanat5375]

Good luck with selling the other RS Turbo. Hope you make a healthy profit gents. Have a happy Sunday.

[@billywhizz1984]

Finding parts for Nissan / Vauxhall / Renault vans is no joke. I have a 2007 Movano and even finding the simplest of bits like the passenger cup holder or the original clear side repeaters has proved to be difficult. Have a look on eBay for ANY secondhand parts and you'll be lucky to find one of whatever you need. Glad nothing major needs replacing yet!

[@philiprush5754]

Another one down guys but very interesting Rob can I just say I don't no if you approve but could all of your subscribers keep the people in Plymouth and say a prayer for the families who have lost loved ones may they rest in peace

[@HonkyHorton]

Does Chris ever relax? He’s some lad for putting in the hours. Thanks again for another great week of videos. Have a good weekend lads 👍

[@cooltools007]

Nope,....he's. A man of action 😉 lol

[@crisfiler6128]

They both put in the hours with so many jobs on the go....credit to them both they deserve the fruits of their labour.

[@cooltools007]

@@crisfiler6128 most definitely

[@bigsammyh1964]

hi rob and chris watched all your videos just noticed watching your videos on the nissan nv200 there is a ford badge on the front bottom lol keep up the good work guys .

[@jonathandeeley6276]

Ha ha. Thought I saw it as well.👍

[@sruk]

Yes it’s off the focus parked next to it

[@roypowell3450]

Can't believe how Chris cracks on when you pop out Rob :) Yes let the RS go guys...

[@commander_lard]

Love the effect the clouds make on the windscreens when you timelapse, really quite mesmerising...

[@chrisstyles4630]

Great work as always Rob & Chris the work you do is nothing short of amazing & just how good you make them look like new vehicles 👍

[@chip1pan]

Another super demonstration of how to use that doser. Looks so easy when it's in the hands of professionals. I like how you both work so well and uniformed together. 👍👍👍👍👍

[@GeorgeLaird]

That is a nice van, glad to see it 'up on the ramp' in the process of getting put back into use. Someone will enjoy this vehicle when it is fully done and setup.

[@chrischallis4240]

Rob..so good watching you and chris working away so calmly..my heart rate goes up working on my cars, as the stress and frustration rates increase..!

[@marciasommerville9969]

Fantastic video, loved watching the panel being pulled back in to shape, thank you guys for taking the time to entertain us, till the next one 👍🇬🇧

[@andrewduncan3194]

Hi guys great video it's a joy to watch it all coming together have a great weekend 👍👍

[@vespamorelli7090]

Another one saved boys !! Very interesting to see the paint being put into the can. Def the right move to shift the escort on. Have a great week boys and thanks for the amazing content 👏🏻👏🏻👏🏻

[@skodakatie7341]

Great work guys, looking forward to seeing this van when it’s finished❤️.

[@paulhayes1683]

Top skills from Chirs again 👏 coming along nicely

[@markbanks239]

You two are great love chris's work is great your vid skills are kool all round entertainment best on u tube by far

[@cooltools007]

I love watching Chris he's clearly,..."a man of action" , I know he surprises Rob at times... It's a really good partnership to watch,...others should take note who are thinking of starting a business or working in partnership with someone,....Rob your enthusiasm for a started engine, is awesome it could possibly be in parallel in something else in life , but that's for hub or late t.v watchers , 'AHHH, YES,...YES,...YES ...! Enough said ehhh, awesome guys great work and always interesting , thanks.

[@jonsharman6853]

Loved your use of the word captivated Rob, I’m going to use that from now on, that bolt has been captivated from the other side, keep up the fantastic content Rob, love it…

[@josephmccullough6685]

What a skilled guy Chris is. Could watch and learn from him all day. What an asset he is to the work shop. 👍

[@thejackofalltravels8267]

For a minute I was fantasizing about his and his RS Turbos nice job as always Chris on the fitting of the bits. Great content happy Friday everyone.

[@freamonnpbourke8900]

Two great guys! Thanks to you both. Who needs Eastenders when you have Rob and Chris! Cheers guys

[@philtucker1224]

It’s just great watching the Nissan van coming back to “all square” again and I know it’ll get snapped up as soon as you post it for sale on Instagram! - (another great vehicle to get back on the road and back into the hands of some lucky person to help them earn their living…) - Well done Rob & Chris and best regards from “an old Thanet boy” 👍

[@victor58010]

Nice to see Chris taking more of the spotlight ,he's a very handsome man ,and very capable.Thanks for all your tremendous work , and your honest approach to business .

[@martincowie4277]

Love the van rebuilds. 💕

[@troublemotorsport]

Thank God, back to the reason I watch. Fixing salvaged cars or vans

[@austrayasescapes9417]

Always enjoy your videos lads and look forward to next ones

[@peterdavies3862]

Parts retailers offering discounts up and down the country.... Everybody is watching your videos now, Rob!

[@sruk]

It’s really nice bud 👍

[@mrjones2009]

I was waiting for this and that’s a fair decision that is a lot of welding but it is a big project for someone love the link and will use them👍top stuff as usual

[@Martin-lo7tm]

Another great video gents. As a non-engineer I really enjoy watching two experts at work.

[@patrickhill8748]

Whenever I see the ball pien hammer comes out makes me think of the one in my garage from my wife’s grandfather. Another great vid gents!!❤️

[@alextripp1230]

Hi Rob and Chris,not a bad looking van and coming together nicely, will be a nice buy as usual.cheers, Alex.

[@kerryw123]

Starting to go together nicely 👍

[@jamescross2229]

Thanks for showing the paint match. I've used these cans a few times. I matched the Proteo Red off an Alfa. The guy in the shop told me there were 13 pigments in the colour!

[@josephoshaughnessy7571]

There’s a good bit of work in that van but it’s going to a lovely job when it’s finished…As for the RS as i said I think you’re both right too let it go…have a great weekend and we’ll see you on Monday evening all being well thank for the entertainment lads 😊

[@andy_v4443]

Ahhh I remember the van now 👍👍 Looking good guys 👍 👍👍👍👍👍👍👍👍

[@benevans3733]

Hope you both have a good weekend and hope you are both staying safe and well

[@richardberry2322]

Another very good video and don't blame you with the second rs turbo it's a lot of work when you already have enough too keep you going for a while

[@darrencowley8265]

Hi Rob and Chris what a great video again I still don't know how you do the video's and keep working thank you take care 😊👍🏻

[@kevat310]

Great work, guys!! Keep up the good work.

[@gwaaa2391]

Awsome addictive content again , love ypur guys videos look forward to the next one ! ✌

[@williamgrady4088]

Wise decision with the second RS. You two have your hands full with all other projects. P.S Love watching the dozer in action

[@haydenuk02]

Excellent work and thanks for sharing this with us take care

[@tomjohntig]

Could not remember this motor Rob I was confused at first then the penny dropped lol thanks for the video and your time Rob & Chris,, Tom

[@stevenjones19-m8i]

Hi Rob and Chris,the Nissan NV200 van is looking smart,with the front panel and bonnet needs spraying the results will be amazing.

[@maffthetaff8625]

cracking video guys,, i did giggle to myself though,, "rob" u said if u haven't seen the first video go back and watch it b4 this one lol,,, we had to watch this all the way b4 u started chatting so would catch u saying it til the end anyway 😅🤣😂

[@chrispayne9589]

Yesss love this time of day :) can allready tell its going to be a good one

[@markmorgan4837]

Another cracking video. Thanks guys.

[@cal844]

Great work again guys! Looking great!

[@benevans3733]

Congratulations on reaching 202,000 subscribers and well done for all your hard work on the cars and vans and the same for the videos as well

[@neilfairless4589]

Rob, Chris makes that panel removal look so easy.

[@Targett02]

Great content thanks Rob & Chris 💯👌🏼

[@shaunmccauley5129]

Great video rob and Chris very interesting like all off them you do well done both Chris is amazing guy how he does his work

[@johnmackay9629]

Another great vid lads loved the paint making bit have a fab weekend guys 🍺🍺🍺🍺😀

[@thefloorkiller]

Great video, so that's how the paint is done, I have a paint supplier who makes my paint cans each one a perfect match and gun like nozzles on them but always wondered how he made up the paint and cans, he always makes them in the backshop so I have never seen it done

[@damiancollins475]

Looking forward to the roll-out of Vids" you have upped your game again💯‼👍🇬🇧

[@TheDaf95xf]

Evening Rob. That was a lot of technical work but Chris as usual did his magic 😂 Have a lovely weekend both of you and stay safe cheers Stevie 😎

[@dermotmurphy7109]

Great vid lads i love watching this sort ov work, i did comment on wednesdays video on the 2 turbos it was a good one but i dont think it sent to yous, gonna be a sweet little van wen done this, good work again lads enjoyed it 👍👍

[@trevorjarvis3021]

Great to see Chris working his magic again …. You could almost see his mind working ……. “I need a slightly bigger hammer” …brilliant content👍

[@rbcleaningskegness9191]

Great video have a fantastic weekend Rob and Chris 👍🏻

[@wayneryan326]

What can I say guys another great video 👍keep.them coming

[@jimschafer9196]

WOW on the spray can mix what a novel idea it was a first for me. Great video thanks for the share.

[@bigjonnyjones]

Brilliant video as always , shame about the rs turbo think it would be a show car with you’re attention to detail but that welding would be no good for Chris’s back plus it’s another long term project taking space up . Keep them coming

[@davidford2169]

Great vid guys. Didnt know that you could get paint mixed in an aerosol..very good that. I always like to comment as i think you like the weather updates from "sunny"Norfolk.

[@eddiehunter2901]

Well guys love your videos. Just a little idea about your light flashing. I had the same issue with my kitchen light. And I just changed the fuse at the side of the light fitting. Cost a few quid. Bee a bit cheaper than changing to led. Keep the legal videos coming 👍🏻👍🏻

[@taxidmac5907]

Love watching Chris work would be nice to hear from him he is master craftsman a credit to the trade

[@cooltools007]

💯 definitely

[@cinccave5459]

Chris is right. That RS isn't a project for you. It's a home project. Now this Nissan that makes a good project and good viewing.

[@shaunwest3612]

Great video salvage rebuilds, great work Rob and chris, looks amazing, can't believe the price of that part 😳, 👍😀👌

[@richardbeynon8465]

Smashing can't wait to see it after paint

[@stephenricketts7764]

Black vans (or any Black vehicle) will show imperfections more than others. As you are probably aware its good practice to spray a dust coat in Black or another dark colour to then flat off a whole car when in primer. That doesn't apply in your case though. This does look like a quick job providing all the parts come together. Excellent and informative video again Rob and Chris. Stay safe guys. 👍👍

[@Alexander_l322]

Nice one lads she’s starting to look like a straight van once again 👍🏼👍🏼👍🏼👍🏼

[@mindthemen8053]

202k subscribers now Rob and Chris, 300k before Christmas 👍👍 well done lads

[@martf9875]

Hi Rob ,Chris ,what can I say Chris is a talented perfectionist lol ,no detriment to.you Rob I know you're both good at what you do ,great content, keep em coming stay safe all 👍

[@tomtodhunter1776]

Great video. 👍 I may be a bit wierd, but there is something oddly theraputic at watching metal being pulled back to it's original shape. 😁

[@jbillingham68]

I don't blame you selling the other rs turbo and let another person take it on as we all know you both have enough going on in the yard another cracking video guys enjoy your weekend and can't wait to see more 👍👍👍👍💯💯💯💯

[@georgedaville4662]

I used to live in Derby for a couple of years in the early 80’s. Spent a lot of time in scrapyards getting bits off motors to keep my decaying Austin Maxi on the road. Most body parts were rusting after 3 years in them days! My car looked like Jacobs technicolour dream coat😂 Another great video, worrying how thin some of the metal is! Parts prices 🥲🥲🥲

[@nickhoward9343]

Been looking forward to this project lads

[@robertjohnson3406]

Hiya Rob, Derby is pronounced Darby. 😂

[@kerbsiderecycling2694]

As always a pleasure to watch this video great video

[@kevinisaac9139]

Coming together nicely 👍

[@banksy2012]

Been waiting for this video all day cheers boys

[@paulchilds8884]

another great video guys

[@mikedalt3622]

Nice upload gents, enjoyed the van so far :)

[@martinhiggins4633]

you will make a killing on the van the prices have gone mental and its a good spec.great video as per usual!!

[@mehere3013]

I thought when Chris was left himself he was going to be brave and give commentary . Masters at work as usual

[@melwebb8485]

no words are necessary you just look and learn and admire skill

[@jamiefrew6151]

Chris what a man you are, would hire you in the morning for any job!! Keep the good work up Rob and Chris brilliant combo of lads. Channel is doing well but honestly it deserves a lot more viewers with the hard work yous have put in. Been watching 2 years. This channel will be massive soon, please don’t sell yourself to a tv channel 😭 because that’s coming because yous are the best

[@stephenricketts7764]

TV will want the rights to all the content and make them work 12 hours a day. 🤭

[@robertmorin1454]

Would not have thought a Nissan van would prove to have such an expensive but with the slam panel! But one more video should see it driving away ! 👍🇨🇦

[@danielhall350]

Would of loved to see the rs on the rotisserie 👍🏻 Keep up the good work boys.

[@johnpells5992]

Great video guys good job👍👍👍👍

[@gerrypowell2748]

Interesting aspects of your job❤️

[@glynburchell6716]

Another great job lads

[@denty32]

Loved it, top work 👏👏

[@ianstevens6740]

Really liked video and the link to paint matching shop going to be trying them out

[@v88krb]

They call it Derby in Tasmania but it is Darby in England despite the spelling! Another interesting piece, how flimsy is that front component Chris was removing.

[@mrbigvanlife7130]

They can’t help being saverners 😁

[@recruitmentwebsites]

Great work chaps

[@dustymiller7758]

Great vid again guys.

[@anthonyhawkins9239]

Great stuff lads 👍

[@adierob1]

Enjoy watching the van videos you and Chris do there great rob. It's a shame about the rs but I suppose you could salvage original bits off it to replace the after market stuff on the other rs. Get a replacement starter in that flashing light 😆😆👍

[@ethanatkinson2345]

Great video Rob and Chris

[@jamiepowell6655]

Enjoy your videos i'm originally from parkwood rainham I live in ireland now