Repairing Ultrex Brackets that Squeak or are Loose

Many of us are entering the time of year when we fix all the stuff we've torn up of worn out through the year. In this video the guys at Jones Trolling Motor show us how to repair an Ultrex or Fortrex trolling motor bracket that is squeaking or has gotten loose, it's a simple fix, part cost about $50 and if you want them to do it it's about an hour of labor cost.
Stick around, later this week we are going to review a Vexus glass boat, and we are going to post part 2 of the interview with Texas Parks and Wildlife Biologist Todd Driscoll as he continues to update us on the Bass Tracking Telemetry he and another biologist are doing on Toledo Bend and Lake Fork bass, really fascinating stuff!
My Instagram page / kensmithfishing2.0
Links from today's videos
Lew's Wide Spool Reel bit.ly/36ztgUw Lew's Mach Speed Cutters bit.ly/2IKw33D
Waterland Optics (remember code Ken10 gets you a 10% discount) bit.ly/2AqabKo
Seaguar InvizX Fluorocarbon Line - bit.ly/36CmVb4
TackleWarehouse Clearance Items bit.ly/2RYCNzi
For electronics help reach out to Jones Trolling Motor & Electronics at 870 773 3474 or bit.ly/3gCyuog and please let them know you found them through Ken Smith Fishing
#Kensmithfishing #Jonestrollingmotor #reparingultrexbracket
Avid Tournament angler, outdoor writer, have won a few Angler of the Year titles including the Cowboy BFL, and a second place AOY finish in the Okie BFL and many tournaments over the years. On my channel I show lake reports from Sam Rayburn and Toledo Bend, tournament footage, footage on how to practice for tournaments, product reviews, map study, how to read and interpret your electronics, equipment, all the things that I’ve gone looking for from other sources over the years.
Many of you have expressed an interest in supporting Ken Smith Fishing, when you purchase from my partners 6th Sense Fishing using my discount code Ken10, or Tackle Warehouse using one of the links below you are 100% supporting Ken Smith Fishing and your patronage is very much appreciated.
6th Sense Fishing Products 6thsensefishing.com/ 10% discount code KEN10
If you’re just going shopping at Tackle Warehouse using this link supports Ken Smith Fishing more than you can know bit.ly/2S4dFY6
My current favorite all around Lew’s Reel in the 6.8-1 ratio bit.ly/2O7hVEG
Other products I use and believe in: Minn Kota Ultrex bit.ly/313vD0F
Humminbird Helix 12 G3 Chirp bit.ly/2RWpDCV
Best Line for the $ - Seaguar InvizX bit.ly/36CmVb4
Best line if $ doesn’t matter - bit.ly/2Gzs60T
Big D trolling motor handle bit.ly/2RYLDyo
GoPro Hero 8 Black bit.ly/2uiRPYR
YOLOtek PowerStick bit.ly/3be8E7K
Power-Pole Blades Power-Pole Wireless Foot Switch bit.ly/36UY56h
Rapala Touch Screen Scale bit.ly/2RWnvwe
Loc-R-Bar Alarm System bit.ly/2ty6eQC
If you plan to do any shopping, using our links before doing your shopping at Tackle Warehouse is the single greatest way to support Ken Smith Fishing! You won't be able to even see a difference but they'll know you're part of the Ken Smith Fishing family and like what we are doing! Use this link please bit.ly/2S4dFY6
To subscribe please click here bit.ly/3bde7Mn
For Rayburn and Toledo Bend Fishing Reports click here bit.ly/3bdnyew
For Sam Rayburn navigation and map tips see these two playlists bit.ly/39772ed & bit.ly/2SkFJ9w
For some of the same gear I use at a discount check out these sites and discount codes:
The best rods and reels in the marketplace today Lew’s Rods bit.ly/37HLJQf
Lew’s Reels bit.ly/36FJpb2
Best Fluorocarbon and Braided line available at bit.ly/38QpBDm
Gary Yamamoto Custom baits bit.ly/36Ixl98
If you aren’t fishing with a ROBOT..you are missing out, check out the Minn Kota Ultrex at
bit.ly/2RHmBmZ
The BEAST the new Mercury V8 4 Stroke 250 Pro XS bit.ly/2tvlhdR
Fishing as always in my 2018 Ranger Z521c with the new Mercury 4 Stroke V8 250 Pro XS.
Still looking for Bigfoot, dude if you are out there drop me a note, love to do a video with you.
Special thanks to all the people who help me stay on the water and fishing with the best products
out there, Mercury outboards, Lew's Rods and Reels, 6th Sense Fishing, Gary Yamamoto Custom Baits, Seaguar Line, Humminbird and Minn Kota Ultrex trolling motors, Onyx life jackets, Bite-Me Tackle. Humminbird Fortrex 350 MEGA Imaging transducer Humminbird bit.ly/30uh2M0 Helix 12 Chirp Mega Imaging Sonar bit.ly/2RWpDCV
If you need to reach me my email address is [e-mail]
Make sure and check out my website as well, www.KenSmithFishing.com

[@brians.4488]

You have to wonder at only 18 months of moderate to heavy use those bushings fail?!?! That probably shouldnt happen to a 3,000+ trolling motor!! Anywho great videos as usuall!! Cant wait for your take on the vexus!

[@DRDROP-fj4bo]

Good Stuff. Thanks Ken and Jones Troll Motor.

[@johnniemitchell7797]

This is very good information. Thanks for all your videos.

[@peterschulties3258]

Just changed mine out. It was a snap! Thanks for the great video. For anyone about to do this I DID NOT need a heat gun. Impact drill with a new bit no problem. Maybe I got lucky.

[@tylerb9110]

What size torx bit

[@alanmcnally7268]

Ken Good point on catching up on Trolling motor maintenence after last tourney. My ultrex issue : On manual control my motor automatically turns on andI would have to touch the foot pad to stop it. Now its running contineuous on manual mode. Understand a simple fix in the foot control to repair. Thanks again.

[@louiswooley966]

Nice to be young and knowledged!

[@solidrockoutdoors]

I’m ready to see that livescope install.

[@kellybarnett7460]

Thank you for making these informative videos. Keep up the good work. Blessings to you and yours.

[@KenSmithFishing]

Same to you Kelly

[@robertjacobsfishing]

Very helpful video!

[@jamesw5836]

One word of warning if you pull the trolling motor out of the bracket, make sure to remove the hydraulic assist first. That bracket can break an arm if it gets released with a body part in the way. Best idea is to pay someone that knows what they are doing. It's less expensive than a ER visit.

[@charliekingfishing]

It there any thing that Can be repaired on the top side to tighten thigs up?

[@alanaho4915]

Ken, I love these tips and information videos you do. So I checked my brackets and all seems well. However, my Ultrx shaft from the head down through the units bracket seems loose, just not as firm as I think it should be. Do you think you could add a part 2+ on this part of the Ultrex?

[@KenSmithFishing]

Alan email me and explain more and I’ll find out [e-mail]

[@brians.4488]

Ken I've only had my ultrex for a few months and it has started that popping and creaking crap already!!!! They mentioned in the install instructions to if possible use the outer mount holes on the base but my aluminum express already had those rivet nuts set

[@KenSmithFishing]

Brian I suspect it's the bracket, not how it's mounted, mine is noisy as well

[@ised8uwell]

Unrelated. But are you doing a VX20/VX21? Curious how it adds up. I heard the rough water ride is unbelievable. Ranger slow so not a 75mph rig but who cares. Lol

[@Chris351971]

Just did mine it was a simple fix.

[@KenSmithFishing]

How long before you could walk without pain?

[@Chris-sp6sl]

@@KenSmithFishing sorry not sure what you’re referring too about how long before I could walk.

[@timhafley5177]

Can't you spray them with something before they ware theirself out.

[@reelmotivatedfishing1580]

Did you greese the pivots? Cuz mine are greased 🤣 I got about 18 months on mine too and going to replace then today

[@jimk4267]

Just an experienced helpful hint. Get rid of the extension on the impact driver. You are losing a ton of torque

[@KenSmithFishing]

Really?

[@jimk4267]

@@KenSmithFishing Yes the extension absorbs the impacting and twists reducing torque at the bit or socket . A poor quality bit or socket will do the same.

[@tylerb9110]

What size torx bit is needed

[@KenSmithFishing]

Tyler I'm sorry but I don't remember,

[@michaelgrant2434]

The ultrex has a 3 yr. warranty. Was this repair covered or not ??

[@KenSmithFishing]

Michael, my understanding is it’s considered normal wear and therefore generally not covered.

[@michaelgrant2434]

@@KenSmithFishing That really sucks,yours 18mos old ? Mine is ayear and has been in the shop for 3 different problems,at least they were under warranty,poor product quality,have had many trolling motors that were many years old with only a cable break They seem to be using the cheapest materials available and charging outrageous prices for a bunch of crap. Thanks for the reply,really enjoy your videos from all the way in Fla. !!!

[@JL-un6eb]

Mine was warranty. 18 mos. of use. I fish alot.

[@Letzgobrandun-wi1pc]

Are thier bushings on the top side of the motor? (Below the head on the other pivot point on the bracket) ?