Рет қаралды 47,195
Showing how to replace a power steering pump on 03-08 Honda Pilots with the 3.5L V6 engine.
The replacement part is a remanufactured power steering pump. The pulley and low-pressure housing attachment will be swapped from the old pulley to the new one.
Tools needed:
ratchet
10mm socket
12mm socket
19mm socket
pick tool
Honda power steering fluid
Funnel
Shop rags or towels
Hose clamp pliers or pliers in general
Torque specs:
10mm low pressure line connector to power steering pump: lightly hand tighten.
10mm high pressure line bolts: 96 inch.lbs.
12mm power steering housing to engine block bolts: 16 ft.lbs.
Power steering pulley: tight but not overtightened.