I want reiterate the comment below. This is how you do a how to video for the average car guy. No fluff, no buff, just quick and easy description packed full of great tips. I now know exactly what I have to do without have to wade through hours of bad home made video. Well done. I shall be coming back to your site again for my next project.
@cperkins1722 жыл бұрын
I am planning to do this job very shortly. This was a little helpful but went way too fast. Luckily i am mechanical so i will figure my way around.
@MrRoundel3 жыл бұрын
Excellent video. To the point, great video perspectives, and simple explanations. In short, all steak, no sizzle. And no distracting music, etc. Just how an auto repair video should be. Many thanks.
@andrewbauman70359 ай бұрын
Best most direct video on a specific job I've seen in a long time. Excellent job. Your high IQ is very evident!
@frickinlazer81825 жыл бұрын
Absolutely well done sir. This is how I like my automotive tutorials.
@HowtoAutomotive5 жыл бұрын
Glad you like the videos. Thank you for watching!
@marthab41722 жыл бұрын
@@HowtoAutomotive hi thank you. Do I have to remove the serpentine belt first , before replacing the power steering belt , please? Thank you!
@HowtoAutomotive2 жыл бұрын
@@marthab4172 there’s only one belt on the vehicle. So yes you have to remove it.
@marthab41722 жыл бұрын
@@HowtoAutomotive so remove the drive belt first and then the power steering belt? Thanks
@marthab41722 жыл бұрын
@@HowtoAutomotive 2 belts you can’t drive without power steering.
@AGENTtimex5 жыл бұрын
I used this video to successfully replace my power steering pump an hour ago, so THANKS for posting this. I want to add, the bolt on the under side of the pump is VERY hard to get to and turn. So what I ended up doing was unscrewing the port that connects the reservoir side hose and removing it from the pump. It's a 10mm bolt directly under the port. Once I took that off it was much easier to get to that under side bolt. Good luck, everybody.
@HowtoAutomotive5 жыл бұрын
KeithTheKreHater Glad the video was helpful. Thank you for watching and the tips!
@kevinhood53226 жыл бұрын
Very good video! I really like the fact that you don't drag it out talking. Straight to the point. Thanks a lot, it was very helpful.
@HowtoAutomotive6 жыл бұрын
Kevin Hood thank you for watching! Did it go smooth for you?
@kevinhood53226 жыл бұрын
I actually was changing the tensioner for the other belt. The pulley locked up & burned it off. I went ahead & got the PS belt too, then I realized the motor mount had to be removed. That's what led me to your video. I got the new tensioner on & will tackle the motor mount Friday, but so far, everything is going as planned. I have to say again, your video is one of the best I've seen on here. Most of them put me to sleep before they ever start the job. Thanks again!
@HowtoAutomotive6 жыл бұрын
Kevin Hood glad it going smooth and your still awake 😉 thank you for watching!
@marthab41722 жыл бұрын
@@kevinhood5322 Hello! How to replace just the power steering belt , just remove the engine holder bracket? Please, thank you.
@doctorwu1303 Жыл бұрын
This was a tremendous video demonstration and helped me so much. Thanks for taking the time to post quality content.
@elizab69924 жыл бұрын
Perfect. Very helpful. Doing the belts on this exact model and the Chilton didn't have enough about the 3.0 L. Thank you so much! Got the job done.
@CamNguyen-qf6oz Жыл бұрын
Very details and easy to understand in how to repair your car.
@kericue20655 жыл бұрын
Very clear on what to do, I hope it's as easy on my car as you made it look on yours. Not sure I have to change the pump yet. My son and I just changed the high pressure hose but it's frothing the fluid and I have to check the other hose to see where air is being sucked up. Saved your video just in case. Thank you for making such a nice video.
@HowtoAutomotive5 жыл бұрын
K I hope it goes smooth for you. Good luck to you and your son. Thank you for watching!
@jmflightandphotographyАй бұрын
Thanks for making this video. Really helped out. These instructions are close to the same for my 99 Acura cl 3.0 . Same engine, different motor mount. 💯🎯
@DJSHaKa3 жыл бұрын
Quick, clear - to the point, no stupid rock music. Thank you
@jarymap4 жыл бұрын
Thank god for this man. You did an absolutely amazing job!
@HowtoAutomotive4 жыл бұрын
Jacob Maples thank you!
@kreater875 жыл бұрын
Thanks to you and your informative video I was able to change the power steering pump on a 1999 honda accord today!
@ericbonewicz36913 жыл бұрын
Thank you! I felt like I was the only Honda that had that annoying bracket in the way of replacing the power steering belt!
@qrs36583 жыл бұрын
Awesome video brother. Straight to the point. Better than a school presentation!!!
@jakepfannenstiel77032 жыл бұрын
Absolutely helped me replace the pump with confidence. Good Video - liked! Thanks
@charliejensen3214 Жыл бұрын
Amazing video! This video had me done with this job in less than two hours. Thank you!
@HowtoAutomotive Жыл бұрын
Glad the video helped. Thank you for watching!
@eddieleejoseph29984 жыл бұрын
I got mines on today thanks to this video.
@MohecIt Жыл бұрын
Very well explaining everything well done sir
@johnbaron30703 жыл бұрын
What’s that block that comes with the 17 mm screw off the motor mount?
@DonavanBarraza10 ай бұрын
you a real one for this fam
@JuanHernandez-ii8fc4 жыл бұрын
Thanks very helpful and step by step not like other videos that just confuse you..i appreciate ur hard wrk
@alvon9115 жыл бұрын
Thanks for a terrific video. I feel confident I can tackle it at home.
@HowtoAutomotive5 жыл бұрын
Glad the video is helpful. Thank you for watching!
@Jeremiah.12 жыл бұрын
Excellent video very clear right to the point
@officialyungtwizted38582 жыл бұрын
How many bottles of power steering did you need?
@scottcoon27952 жыл бұрын
If I just need to replace the power steering pump do I need to remove the alternator belt?
@HowtoAutomotive2 жыл бұрын
Yes it’s all the same belt.
@HP_Quinn10 ай бұрын
My power steering pressure line (that one right on top) is leaking power steering fluid 😩. How difficult is it to replace that? I'm hoping that's all I'll have to replace .. :-/
@paolicelli7275 жыл бұрын
Excellent video on the J series Honda I will be doing this job tomorrow. Thanks
@midtiergaming5090 Жыл бұрын
thanks glad i only have to do the fan belt for now
@rorysullivan5155 жыл бұрын
Excellent video! Two thumbs way up! So very helpful. Exactly what I needed to change my belts. Thanks so much keep up the great work 👍😁
@alejandrollamas6926 ай бұрын
Excellent info..thanks 👍🏼
@svsb012782 Жыл бұрын
Does anyone know where to find the alt belt diagram? Been looking all morning and it's the last thing I gotta know for this repair
@unebonnevie11 ай бұрын
Good thing I have a 2.3L Honda Accord. The power steering pump is much, much easier to replace.
@pjusino55 жыл бұрын
Great work!Thank you for your time.
@HowtoAutomotive5 жыл бұрын
pjusino5 thank you and thank you for watching!
@richardcallahan84013 жыл бұрын
great stuff ...very clear and accurate
@brandoncrawford2851 Жыл бұрын
Very helpful thank you
@marcosdavidmartinezalonso73233 жыл бұрын
Thanks for teaching me I loved this video I want go doing tomo
@johnargue29772 жыл бұрын
5 stars ! Am a KZbin mechanic. Couldn't find adjuster for p/s pump. Boom..video shows it 5:14
@HowtoAutomotive2 жыл бұрын
Glad to help. Thank you for watching!
@amilcar153 жыл бұрын
I have the same engine. I changed the Bigger belt/ engine belt only because it was pealing off, but when I start the engine the belt slowly goes out of place. Any recomendation on what to do ?
@amilcar153 жыл бұрын
This video was very helpfull by the way. Thanks again.
@johnmccormack27272 жыл бұрын
Excellent video. thanks for the help. Could have been a lot more difficult without it. As you know, the engineers just have to make everything fit, they don't have to work on it!
@HowtoAutomotive2 жыл бұрын
So true those engineers are not working on these. Thank you for watching!
@abrahamisraelreyesmares86785 жыл бұрын
Good work , thanks for the video.
@billyluu31014 жыл бұрын
is jacking up/supporting the engine necessary? I haven't seen that done in any other tutorials. I'm afraid I might damage the oil pan
@chrischris6664 жыл бұрын
Yes Like he said just a little to support the engine because you need to remove the motor mount bolts to install the new power steering belt.
@pierrez.6007 Жыл бұрын
17mm Motor mount bolt won't budge
@todddenenR52 жыл бұрын
Great stuff... Thanks.
@utmc67885 жыл бұрын
good video!
@HowtoAutomotive5 жыл бұрын
Thank you and thank you for watching!
@thujtothek2 ай бұрын
Thank you
@kevinfelix73713 жыл бұрын
Excellent thank you
@sugamanspodcast4 жыл бұрын
Thank you, very helpful! :)
@HowtoAutomotive4 жыл бұрын
Sugaman Thank you for watching!
@davidsanchez37006 ай бұрын
God job
@Feedbacker13 жыл бұрын
Hey. Do the tensioner last and you don’t have to go underneath. 🤦♂️ easy peesey that way