Replace Wheel Bearings - Toyota Hilux 1999

[@buckjohnson6244]

Excellent vid. Straight forward, no bs. Thanks mate

[@lorenzocuzman7778]

Cheers mate! This is what I was looking for gonna give the old luxi a helping hand 👍🏼👍🏼

[@TEKNOFIED]

No problem 👍Glad is was helpful.

[@derekarcher8495]

Great vid mate. Nice and straightforward, unlike the damn manual! Thanks heaps, will tackle this next weekend!

[@TEKNOFIED]

Happy to help.

[@badassbmonkey]

Cheers mate, looks easy enough.. wouldn't have attempted it without your vid 👍🏻

[@TEKNOFIED]

Cheers mate, It is simple enough. Remember to take photo's when not sure. Life happens & sometimes jobs get put on hold. Good luck.

[@cobba3494]

Thanks for the tip to remove the sleeves! I had been using a rubber mallet which took way longer

[@jarrodcamilleri6790]

Excellent video mate easy steps to follow

[@JaseC80]

Brilliant vid thankyou! I have the same model Hilux.

[@brianbiggs9697]

Bonza mate, very succinct, great vid and many thanks. Drum brakes on same model please, mine are binding , possible cable linkage, just failed MOT.

[@TEKNOFIED]

This vehical belongs to my good friends son. Any problems he has that I work on I will be sure to make a clip about. It is his work vehical tho.

[@redbeastie6061]

Now I know... real diy is best diy

[@davetaf1323]

Excellent video ....gonna save me a buck !

[@TEKNOFIED]

Glad I could help

[@God-fire]

Thank you for the lesson

[@TEKNOFIED]

Your very welcome.

[@kalaikauai808]

Thanks for sharing your knowledge 🙏

[@chubeye1187]

Seems to jump the tapping of the bolts to the assembly is removed 😜 I managed to get mine off with a bit of prying as well. Nothing compared to the butcher who had changed my ball joint a few years ago. I will be having words now I seen what they did

[@geelux180]

Got any tips for loosening the 52mm nut without a 52mm socket if its tight? Im planning on doing my bearings. But i reckon my ones are both going to be tight.

[@TEKNOFIED]

First Sock it overnight with Auto trans fluid to help penitrate the thread. You could use a plummers tool or use a chisel with a 2 pound sledge hammer. I know buying a 52mm socket for a once off job it very costly but you are better off getting the right tool for the job.

[@isabellerankin3399]

Thanks for sharing this

[@TEKNOFIED]

My pleasure

[@jordanpulvirenti7769]

Hey mate do you know how tight the axle bolt should be (the one you removed with the rattle gun at the start)?

[@TEKNOFIED]

I don't know the torque specs. I go by feel unless I am doing a head gasket. cheers

[@joshd2013]

Is there two bearings that go into it i just got a front wheel bearing kit for my 1999 ln167 and ive got two different bearings in it

[@TEKNOFIED]

Yes, Both sides. In the clip you can see I removed a seal to remove the bearing on the inner side. Cheers

[@thanachaichongwong4993]

Thank you so much very nice vedeo

[@boxhead7180]

Occy is short for octopus strap. Jockeys are short so the horses don't have to carry too much weight....

[@TEKNOFIED]

Elastic Strap, Bungee strap, Jockey Strap, Occy strap, Tie Down strap. An item called by many names. I wonder if they are called something else.

[@TravMaroskeRacing]

Thanks

[@craigd123]

Do you have to replace gaskets on the hub lock thing?

[@TEKNOFIED]

There was no old gasket that came off neither was there a new one in the bearing kit.

[@craigd123]

@@TEKNOFIED you should buy them. They are only 80c each at Repco. Keeps the water out

[@kyledobbie1679]

Heyy mate having a bit of trouble getting the locking hub back on and lined up any suggestions??

[@TEKNOFIED]

You need to turn the locking hub on as it goes in. If it isn't lining up and going on keep trying one tooth over until it goes all the way in.

[@KevinPDunn]

What if I was less liberal with replacing the old grease? Didnt put as much new grease in as I took out?

[@TEKNOFIED]

You really do need to repack the bearings and replace as much old with new as you can and put in a good amount. It will be the difference between how soon you will be replacing the bearing again. Instead of 10 years maybe 2 years.

[@LewisYakas-ge7hq]

Mean bro

[@nicholasrohland7194]

no checking pre-load?

[@angusmcardle9237]

Got it all sorted noticed a couple of things though my spindle from the cv had a little play in it and there was no screw in the end of it is that normal?

[@TEKNOFIED]

Yes a little play is normal.

[@angusmcardle9237]

@@TEKNOFIED sweet cheers

[@carlo1372xt]

Gracias .-

[@TEKNOFIED]

Your very welcome.

[@chuenengyang3685]

It helps me to replace mine.