Replace your Icom IC-7300 Noisy Fan | Listen to the difference (Silent) | Quick and Easy Swap out!

  Рет қаралды 1,641

Darren N4VFR

Darren N4VFR

Күн бұрын

Пікірлер: 15
@bigchew3149
@bigchew3149 Жыл бұрын
I have ben into Radios,Electronics & Computers for 35+ Years & i will be the First To Say Noctua Has The Very Best Fans Money Can Buy. I Have more Than a Dozen in Some of my Junk & They Just Work & Very Quietly to ! They Are Definitely Not The Cheapest Fans out Their But I Also Know That Ya Get What Ya Pay For !
@DarrenN4VFR
@DarrenN4VFR Жыл бұрын
I concur. I have one ready to get put in my Anan 7000DLE Mk3 whenever I get the chance to. 73's de N4VFR
@earicci
@earicci 11 ай бұрын
So, replacing the fan would be considered an unauthorized modification, correct? If the rig needed warranty service at a later date, but within warranty, would you be out of luck?
@DarrenN4VFR
@DarrenN4VFR 11 ай бұрын
That would be correct. Probably voids the warranty. That's the risk your taking if you decide to modify your radios.
@bennisvcat1340
@bennisvcat1340 Жыл бұрын
Hmm.. are you sure about the performance of this new fan. Did you measure the air blow from this new fan?. Where the fanblade pitch the same ? And what about the fan speed?
@JayN4GO
@JayN4GO Жыл бұрын
How are you liking your om2k capt ? Anything you don’t like about it ?
@DarrenN4VFR
@DarrenN4VFR Жыл бұрын
Hello Jay, I've sold my OM2000+. Very heavy, noisy cooling fans, and got my room very warm. Other than that, it was a nice amplifier.
@JayN4GO
@JayN4GO Жыл бұрын
@@DarrenN4VFR thanks Darren. I decided to pass on them due to recent review issues.
@DK5ONV
@DK5ONV Жыл бұрын
I replaced the Factory Fan with a Noctua at same Day I bought my IC-7300.
@DarrenN4VFR
@DarrenN4VFR Жыл бұрын
Right on Uncle Guenter!
@g0fvt
@g0fvt Жыл бұрын
Noticeably quieter, but it is worth bearing in mind that the original fan is far more powerful and rated for greater back pressure. Probably a great swap if you don't drive your radio with high power, high duty cycle modes. The 7300 does control the voltage at the fan connector according to demand for cooling. I know this is a popular modification.... 73
@DarrenN4VFR
@DarrenN4VFR Жыл бұрын
This radio which I modified the fan on is no longer used as my primary HF rig. It's new purpose is POTA and running 100 watts. So far no issues because of being outside where there is more ventilation for the radio. Additionally, one will not be running full power to an amplifier which will not overheat the 7300. 73's de N4VFR
@adamap2796
@adamap2796 Жыл бұрын
I don’t think I’ve ever heard my 7300 standard fan, it’s very quite.
@mikegianfrancesco9431
@mikegianfrancesco9431 Жыл бұрын
mine does not do that
@DarrenN4VFR
@DarrenN4VFR Жыл бұрын
You got a lucky batch.
Using Your Rig's Built-In SWR Meter: 3 Examples with the Icom 7300 (#330)
11:55
David Casler Ask Dave
Рет қаралды 17 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,6 МЛН
Icom IC-7300 Screen Replacement
20:01
Matt Schrader
Рет қаралды 10 М.
My thoughts on the Icom Ic-7300 after one year of use
17:49
learnelectronics
Рет қаралды 205 М.
Everything about the MLA-30 Loop Antenna
9:49
Pine Tree State Restorations
Рет қаралды 12 М.
ICOM 756 HF radio, cooling fan add-on
14:45
Klondike Mike's
Рет қаралды 7 М.
Icom IC-7300 Fan Replacement - Install and Sound Comparison
11:46
more jello please
Рет қаралды 14 М.
DIY Icom IC-7300 Travel Case
6:14
Transmitting Until Robots Replace Us
Рет қаралды 10 М.
Icom IC 7300 EU version open transmit/mars/11m mod
7:36
Filip Melík
Рет қаралды 3,4 М.
Ameritron AL811H converted to AL811HD with 4 x 572B tubes
18:09
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН