REPLACE YOUR PADS IF YOU HAVE 6 PISTON BREMBOS!!

[@jasonphillips5475]

The dealership wants $500 plus to change the front pads. Best believe I’ll have this vid playing while I change mine! Thanks Bro! ✊🏾

[@jasonphillips5475]

What size socket are you using? 21mm or 22mm?

[@christianhardwick6530]

$69 at Brake Check yesterday 2/2/22 oh. Just noticed the date !! Wow 2019 Scatpack plus only has 24k miles. Crazy I had to replace pads so soon. Will need new rotors next.

[@afrosamurai4465]

Those OEM semi-metallic pads cause so much dust and they eat up the rotor.

[@artsontop]

Center pin/bolt torque is 24 Ft lbs Apparently some folks have broken these with over tightening, this unique hardware is hard to source.

[@hotheadjay3255]

I have warranty on my scat pack and I got warranty do brakes come included ?

[@spike.strat1318]

As i’m sure you already found out, warranties do not cover wear parts, brakes, belts, tires, filters, etc.

[@Knife_Grind]

I’m trying to change my front rotors and pads on my 2021 Scatpack with 6 piston brembos and I hoping these would fit

[@SRT_CHEE]

I’m here for the same thing

[@CBU-j2v]

How fast did the new pads warp the rotors?

[@AndreBaez]

Bro you have no wheel locks on your car I’ll send you a set of locks for free man before you end up on bricks

[@392_RHINO]

What's the difference in z23 and z26 pads guys?

[@luis831_2]

Is their any other steps before driving off?

[@jamesv9707]

Can u tell me the part info for that nylon lug wrench u used, that thing is perfect

[@Onlyphams]

I’ve got the same dilemma with the brake caliper bracket do they both work?

[@gscatty7446]

Did you notice and squeaking, and also, did they cut down on brake dust?

[@avirgilio71]

Another helpful tip is to wobble the rotor around when removing and reinserting pads so you don't need to hammer them in 👍 They are free floating rotors so take advantage

[@marcb1278]

Good vid post. Thanks. But just for kicks, I would have just use an adjustable wrench for hammer just to complement the drill bit. :-)

[@youknowwhyimhere2307]

What about the rears?

[@shinobi9922]

How's the brake life with these pads? Do the last long or wear out quick?

[@SRTorque]

I've put close to 30k miles on them. Still plenty of pad left.

[@hunchokj2164]

How long does the rotors last?

[@kevinmc4500]

I didn’t know Ray Romano did brakes, lol

[@madvillain_105]

Are the part numbers z26 1405 and z26 1053 for the front and the rear?

[@SRTorque]

Looks correct to me.

[@madvillain_105]

@@SRTorque awesome thanks sir!

[@jakechoi4193]

where did you get your rotors? they don't look stock rotor for 6piston brembos either.

[@SRTorque]

Rotors are 100% stock for a 2017.

[@jakechoi4193]

​@@SRTorque Thank you so much for the quick response, yes I did more research and those are stock rotors for former 6piston Brembos.

[@Jeff-ej4wp]

Can you recommend any pads made in USA and not made in china like Powerstop?

[@davidjones2962]

Lol bro don’t be afraid cuz it’s made in china bcuz best believe these companies aren’t

[@johnk815]

If you really want to be ocd torque lug nuts starting at 50 then 75 then 110 each time in a star pattern.

[@BMan100]

Welp...just have to rest the rest of my AutoGlym Rim Protector until then lol. 2021 Scat Pack Challenger with Dynamic package...still in transit....

[@RCbashingtheKRATON]

next time turn the wheel..that will help you out alot...my brembos on my camaro are horrible two.. looks like i will have to get a set after i see how they work for you...good job bro

[@SRTorque]

So far so good, drastic reduction in brake dust and still stops just fine for daily driving.

[@Javier.O.]

I have a widebody and I’m currently debating brembo pads or the ones you installed. Any help ?

[@SRTorque]

I believe all widebodies have 6 piston brakes, I'd definately get some powerstop pads over brembos if you don't want dusty rims 24/7.

[@Javier.O.]

@@SRTorque is there any performance difference between the 2?

[@Javier.O.]

My oem currently squeal at 21k miles

[@SRTorque]

I noticed a small performance reduction. Forgot about it after a few says. As a daily driver/show car I was okay with the trade-off.

[@apeturephoto]

Imstruggling to find the wide body parts that aren't OEM. Have you had any luck? I bought the Z26 and they said they didn't fit when I tried to get them installed.

[@90barns]

Have you seen a significant reduction in dust though?

[@SRTorque]

It was a huge reduction

[@davidandersen4218]

Thank you!

[@mannyjmoto1234]

Most people fix that with Ceramic coating ur wheels. Keeps the brake dust off

[@SRTorque]

This is an old video. My wheels are now ceramic coated. It might help but it definitely doesn't make the wheel brake dust proof.

[@BMan100]

....AND I!......put on AutoGlym Wheel Protector so....I don't see any brake dust at all lol good vid though.

[@evosrt5317]

Good video 📹 👍 bro

[@johnk815]

What’s your long term review on the pads? How’s the dust, life and performance? Thanks

[@SRTorque]

21k miles now and there appears to be plenty of pad life left. Dusts way less than stock, it's not even close. Performance is slightly less than factory but I don't notice it anymore. I'd recommend.

[@johnk815]

Thanks

[@donfinkey692]

The lube does not go on the pads! It goes on the edges of the pads.

[@trunkslorenzana]

it goes on both bro lol

[@quackyduck1499]

@@trunkslorenzana you put it where the piston hits the back of the pad and around the edges.

[@dlnelson7759]

A 28min video and it only takes 5 min to change the pads. Didn't even consider watching 😕

[@mikeprice8307]

Entertainment