Replacing a 5'X10' utility trailer wood floor

[@billybike57]

Pretty decent resto!👍🏼

[@northmsoutdoors]

Thank you.

[@danielpadgett2831]

That was alot of yall awsome job really looks good

[@cedaroakfarm8596]

An easier solution, place a 4x4 on the opposite end, with that end under the opposit lip, bend the board down under the lip on the other end and tap the 4x4 out, it will snap in place, don't cut the frame.

[@northmsoutdoors]

It’s only a 10’ trailer. We could bend it far enough to get it in.

[@bc5822]

Just did mine yesterday. Clamp a piece of 3” angle iron to the top rail at one end, put a bottle jack between that and the board, jack the center of the board up with a floor jack from underneath then use the bottle jack to push the loose end of the board down into place

[@Otherwise_Tangerine]

Sounds like you should make a video...​@@bc5822

[@dixiechippers]

Did you paint the metal under the boards before installing the boards?

[@northmsoutdoors]

Yes, I did.

[@Oldtech51]

I use to build trailes and the strip of metal at the front of the floor was just tacked in. Only needed to cut the tack welds to replace the floor.

[@northmsoutdoors]

It was but it was tacked in a place we could not get to with the grinder to cut it.

[@northmsoutdoors]

Yes. It was no trouble.

[@opengl1]

You should really wear ear protection when you're cutting and grinding like that

[@charleswarner6680]

Well, done

[@northmsoutdoors]

@@charleswarner6680 thank you.

[@RyanRamos-n4l]

I didn't have to cut anything or weld anything

[@northmsoutdoors]

Yes, if the trailer is long enough you can bend the boards and pop them in place. Cutting and welding was just easier for me.

[@virbautista7333]

What type of screws you used it?

[@northmsoutdoors]

1.5 inch self tapping screws to screw into the metal supports.

[@EduardoJimenez-rk8nw]

Yeap that's how it's done ! 👍🙏🏆

[@frankswaney2779]

Now thats entertainment!

[@dianevitori201]

Great job !

[@dennystoddard3257]

not a good job

[@Popoutandhandle]

Good deal

[@gregoryclark3870]

Now coat the deck with used motor oil so she doesn’t rot

[@frankgrant4784]

I had money on the bug!