REPLACING EVERY FLUID In My BMW E30

Today we are replacing every single fluid in my 1984 BMW 318i E30 with the M10 engine and a 3 speed Automatic Transmission!
This video will give you a brief explanation and how to on every single fluid in the vehicle. This includes using an engine flush and doing an oil change with new filter, coolant flush or drain and fill, brake fluid flush, transmission flush or drain and fill, removing the transmission pan, replacing the washer fluid, replacing the rear end gear oil, and flushing the power steering fluid with a new reservoir/filter!
I hope you enjoy or learn something new!
If you've missed the first 5 episodes in this series, check out the playlist!
• 1984 BMW E30 318i
If youd like to support the channel consider becoming a member!
/ @dayoffdiy
Or if Patreon is more your speed, we have one of those too!
/ dayoffdiy
Tools Used:
16 Liter Drain Pan
amzn.to/45OO0r1
Rhino Ramps
amzn.to/3EBuwdo
6 Ton Jack Stands
amzn.to/3RhJv3H
Copper Sealing Washer Kit
amzn.to/46ce5zP
Aluminum Sealing Washer Kit
amzn.to/3LnmMiS
Die Grinder
amzn.to/3RjyCyb
Die Grinder/ Drill Wire Wheel Set
amzn.to/3Rqs6Wv
Red Scotch Brite
amzn.to/3EJOOBe
Krylon Satin Black
amzn.to/48iX0pK
Assorted Hose Clamp Set
amzn.to/48apke9
Curil T Gasket Maker
amzn.to/468QuA7
Hose Pick Tool
amzn.to/3PE0fAJ
Brake Fluid Tester Pen
amzn.to/45SZUQn
Brake Fluid Bleeder Tool
amzn.to/3PEc4XG
AMSOIL PART NUMBERS & PRODUCTS:
AMO1G Synthetic 10W40 High Zinc Oil
FLSHCN Engine & Transmission Flush
AMOQT Synthetic Multi-Vehicle OE ATF
AGLPK Synthetic 80W90 Gear Lube
APICN ORMD PI Performance Improver
EA15K51 AMSOIL Oil Filter

[@DanBuilds]

I laughed at the progression of "We're not gonna paint the oil pan", "maybe I should paint it.", "okay we're painting it."

[@DayOffDIY]

lololol yeah that was my thought process spoken out loud LOL Im glad i painted it too.. I knew there wouldve been some "should've painted the oil pan" comments coming ! hahah Good to see ya dan!

[@jaynouby]

I feel like this video will blow up in views in the near future

[@DayOffDIY]

I sure hope so! I was thinking that same thing when coming up with the video idea... Lets see!

[@macgroober1396]

It's amazing to me how much these cars have appreciated. I remember my brother's friend GIVING him a 5 speed coupe back when it was like 7 or 8 years old because he needed a car. You're pup is adorable; she reminds me of a dog I had a while back. Keep up the good work.

[@haroonzangana8489]

Fluid changes are always satisfying, great job as always man.

[@DayOffDIY]

Sure is, glad to have them all adressed now too! appreciate the support!

[@goobysen9202]

you'd make a great teacher. love learning with your e30 vids. i really appreciate all the effort and handwork you put into your vids dude. C:

[@DayOffDIY]

Thank you! I love teaching, whether it was in the fire service or in the shop. I always enjoyed showing the newer guys the ropes and passing along knowledge. Appreciate the comment!!!

[@Mommyhas2smokefirst]

🙌🏻I’m in the club now😆🙋🏻‍♀️

[@DayOffDIY]

Brandi! Youre awesome, thank you for the unending support. You definitely have the most badges next to your username, member, highest number of hearts,and subbed for 6 months!

[@Mommyhas2smokefirst]

@@DayOffDIY 🥇that’s cuz I’m the champ Alec 🤣🤣⭐️⭐️⭐️ have an amazing weekend👩🏻‍🏫

[@DayOffDIY]

You too Brandi!!! 👏🥳

[@supremechris936]

Great video love the content. I am rebuilding a e36 328is

[@DayOffDIY]

Thank You ! Glad you enjoyed it, and good luck on the E36 rebuild! thats a great chassis

[@headshot2379]

just recently bought a 91 318i and this was very informative.

[@SHOoff11]

Love fluid change days, great video! My CL 6-Speed will be getting an entire fluid change here soon! Thanks again!

[@Aardvark49]

Dipstick tube next to oil pickup. Great work Alec!

[@DayOffDIY]

Thats what I thought too, but the dipstick is visible next to that tube... Still unsure... Thanks Vic!

[@tweedjohnny8740]

I am always so happy to see you do meticulous work. It's almost like watching you put a model car together wich was my favorite past time growing up, you know the 1/24 scale where if your OCD you paint every single part to construct a master piece! I would even get pieces of fabric out of my grandma's quilting bag and make a headliner & carpet for each! LOL 😅

[@DayOffDIY]

Johnny! I try! Reorganized the garage with you in mind, gotta have a good lookin back drop. It was starting to get a little messy and didnt feel intentional... Ive always wanted to put one of those together! especially with the mini engine that runs on fuel! lolol that would be a slick looking headliner. Ive always wanted a mexican blanket patterned headliner or seat cover. Hope all is well my friend!

[@shaunflaherty]

Hello from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿, keep up the good work👍🏻👌🏻

[@DayOffDIY]

Scotland! Cheers! Happy to know I have another viewer from across the pond. Have a great week!

[@Astra-rg8hx]

Man, that was great watching you renew all the fluids and The E30 is coming on nicely!!

[@DayOffDIY]

Glad you enjoyed! Pretty pumped on the progress. taking care of registration today

[@Astra-rg8hx]

@DayOffDIY Cool Man!!!

[@bogusienombre355]

Really nice content as usual. Always learn from videos. This was perfect timing for me.

[@DayOffDIY]

Thank you Bog! Glad I could help pass on some knowledge. Appreciate you stopping by as always, have a great weekend!

[@bogusienombre355]

@@DayOffDIY You have a good weekend too. Can you drop a line for some Stone crabs for me? Yum claws.

[@therandomnessofitall1707]

Hello from St Louis Mo! I like the fact that your videos apply to all cars really. Looking forward to the next one!

[@DayOffDIY]

First viewer I know of from St Louis! Thank you! I try to keep it general so it can apply to all makes and models. Appreciate the support!

[@collinortner3884]

new day off diy vid posted right as i go on break at work. perfect timing :)

[@DayOffDIY]

I love it when I take a work break and theres a new video out from one of my usual watches, glad I can do the same for you! Cheers Collin! Thanks for the comment

[@thiagocars]

You’re doing great man. Love the content 🤙🏻

[@DayOffDIY]

Thank you! appreciate the support friend!

[@mr.silens1641]

Awesome video! Love the content and especially how this E30 is starting to look and mechanically get better and better. I'm starting to get real tempted on buying an E30 as well.

[@DayOffDIY]

Thank you! Its coming along slowly but surely. Its a great little car, the M10 engine is really growing on me and has more pep than i originally thought! if you can find one for cheap id jump on it. seems like theyre quite valuable at the moment and i assume will only go up

[@brendannoonan6503]

Another great video, thought it was only me that experienced problems with an expected easy job that goes wrong. Well done

[@DayOffDIY]

thanks brendan! Its the rule of mechanical law, what seems to be easy will always become difficult lol Thanks for the support!

[@jskuether]

I grew up in Superior, WI back in the ‘80s. Love that you used products made in my hometown. 👍🏻

[@DayOffDIY]

thats awesome! Im actually looking into becoming an AMSOIL dealer so I can pass some savings onto my viewers if theyre interested!

[@ryanm.3681]

Great Video Keep em coming

[@DayOffDIY]

Thanks Ryan! Workin on the next part right now, attempted to smog and it kicked my ass, quite a few things did this week lol. Should have some new content out soon! hope you have a great week

[@ryanm.3681]

sweeeet @@DayOffDIY

[@buster8295]

Sage is the mellowest pup I have ever seen. Real sweetie.

[@DayOffDIY]

yeah shes great, she gets the zoomies real hard a few times a day and can get wild, ill have to capture some of those moments and throw em in the video next time lol

[@ejoautovideos]

New viewer here. Just want to say that your videos are really good. Nice format, good angles, commentary etc. Keep it up! 😊👍

[@DayOffDIY]

I really appreciate that! Thanks for the comment and the feedback, and welcome to the channel! I hope you stick around

[@johnbanks8269]

love the work you do. you're really evolving as a youtuber. keep it up brother you'll make it big time if you stay positive and keep working hard!

[@DayOffDIY]

Appreciate it John! It means a lot. Lets keep this train a rollin!

[@denisemcclafferty3930]

Hi! Loved this one. I think I had a tear in my eye seeing you driving my pretty little car. She seems to be doing well at her Day Off DIY spa days! I could not have handed her off to anyone better for her. Thanks so much. Denise.

[@DayOffDIY]

Denise! Im glad you enjoyed! Shes driving a lot better, still working on getting the car registered. It does not want to pass smog... Did you ever have an issue with SMOG? and also, did you ever have the catalytic converter replaced?

[@denisemcclafferty3930]

Hi Alec - I don't recall having any difficulty with smog, but with one of my cars that sat for quite a while, didn't pass smog, so the mechanic told me to drive it for a while and then come back, and it passed smog just fine. I wonder if the BMW place still has records on me because I have no idea if the catalytic converter was replaced. @@DayOffDIY

[@KostasStergio]

I like your videos you've got a nice vibe. Keep going those videos.

[@DayOffDIY]

Thank you! appreciate the feedback big time. A good vibe is what im striving for! cheers

[@rossparkes]

Another great video man, love how satisfying it is to flush all those systems out! Sucks about the pressure brake bleeder tho!

[@DayOffDIY]

Thanks Ross! Pretty pumped with how this video came out. Yeah time for a new brand brake bleeder... At least I got my moneys worth out of it. Good to see you!

[@whappy212]

Another banger🔥👌 good job alec video is topnotch like all of them😎

[@DayOffDIY]

Thank you! I was pretty pumped on this one, had a good flow to it I think. recently switched editing software which i think really helped too. Cheers! appreciate the support my friend!

[@polloloci21]

For some strange reason- I was so happy to see the painted oil pan. 🤷🏻‍♂️

[@DayOffDIY]

me too! Was hoping the viewers would appreciate it

[@polloloci21]

@@DayOffDIY I did- I’m sure others did too.

[@ferjaniahmed3742]

Good work

[@DayOffDIY]

thank you! appreciate it

[@bocekokone]

Much love from Eastern Europe (Bulgaria). I really like your content because its educational and great to watch! Keep it up.

[@DayOffDIY]

my first Bulgarian viewer ive seen so far! thank you so much for the support. Always makes my day to know I have a viewer on the other side of the world that likes my videos... cant believe it sometimes! have a great day!

[@tinajohnson7534]

Watching you remove that oil pan made me not thrilled that I have that job to do on my e46. Your pan was SO much easier to get to. I'm trying to decide if I need to take down the subframe to get to mine. But then I could do engine mounts and a new power steering pump too, so maybe you've talked me into it! LOL! Great video and love seeing old bimmers that are so well cared for.

[@tinajohnson7534]

Power steering pump just went out after almost 24 years. So that is definitely on my list of must do's. The task of dropping the subframe on this car seems daunting since I've never done this. The reason why watching videos like this is so helpful. @@davidwesternall873

[@DayOffDIY]

Hey! Thanks for the comment. Yeah this is the easiest oil pan I think ive ever done! LOL. Ive done too many E46 oil pans, but i must say that out of all the chassis that require dropping of the subferame, the E46 is probably the easiest. I wish I had a video on it, ill try to do one in the near future. You should be able to replace the P/S pump without dropping the subframe, and that can help build up confidence leading up to the pan gasket. Like david said I like to use an engine support bar to support the engine for dropping the subframe. I got one at harbor freight for around 100 bucks. To drop the subframe I remove the nuts from the engine mounts from the top, then down below I disconnect the control arm bushings from the body, remove the sway bar, disconnect the steering collumn shaft, and then its pretty much just the 4 bolts for the subframe. It seems daunting but its not too bad once you get into it. Keep in mind the level sensor attached to the control arm. it needs to be disconnected if fitted with one. Id also absolutely do engine mounts while in there. I hope that helps if you do decide to tackle it, and thanks for the support and feedback!

[@tinajohnson7534]

@@DayOffDIY Awesome! Thanks for the advice. I'm heading out now to start to tackle some of these issues, so hopefully it will go well. I might just do the PS pump first and tackle the rest later. Every little thing I so on this car does build my confidence.

[@DayOffDIY]

I think that’s a good idea! The PS pump replacement isn’t too bad! Remove the fan, remove the underbody panel, belt, and a few bolts. You got this! Let us know how it all goes! :)

[@elsimoe7816]

Before watching i know i will love this. Thanks for the ggreat content brother

[@DayOffDIY]

Thank you! I was pumped on the outcome of this one!

[@Mateo.Sutalo]

"Alright, I've got some tacos in me let's keep going!" 😂😂 Love it!!!

[@DayOffDIY]

straight running on tacos over here LOL been doin a chile relleno burrito recently too, epic new discovery hahah hope all is well mateo! Good to see you as always

[@tehedx]

Nice, leaking washer fluid. Yours actually was leaking a lot. Mine had a leak in the headline washers. When it was standing still, nothing dripped. But when you brake and the water gets pushed to the front, it leaks. Go figure that one out :D

[@DayOffDIY]

lol thats hilarious, but also a righteous pain in the ass im going to see about epoxying this tank back together, it split on the bottom. Not really interested in sourcing a new one for a ridiculous price.

[@tehedx]

@@DayOffDIY Yeah I can understand that issue. E46 seems to be the oldest model for dealers here to supply parts for, if you go older it is becoming 'rare' = expensive. Now don't play beer pong with those cups.

[@mitchellbarnow1709]

Alec, I feel just like I'm back in High School auto shop class or/and at Humboldt State University now Cal Poly Humboldt! Congratulations for taking on KZbin as your primary income source, I must've missed that video.

[@DayOffDIY]

Hey Mitchell! Glad you enjoyed it ! It was a fun one to make. Yeah ive talked about it only briefly throughout a few videos, ill make one dedicated to the whole switch in the near future! Have a great day and thanks for the comment as always!

[@mitchellbarnow1709]

@@DayOffDIYHave a great weekend Alec!

[@Frankysbeemer]

Nice work as always my man. Also, i put a towel under my ramps to prevent it from sliding when im going up so try it out next time! Take care and cant wait for the next video!! 👍🤘👍

[@DayOffDIY]

Thanks Franky! Thats a great idea... cant believe I havent tried something like that yet, both sets of ramps keep slipping on my concrete floor. Appreciate the comment and support as always friend!!!

[@visvaldasbausa2575]

Nice job man! Comment for support. I need to do same job to my f11

[@DayOffDIY]

thanks for the support! Should be a totally different experience on the F body, I miss those chassis, especially the newer E chassis

[@robsweekendgarage]

Loving the progress. It’s gonna give someone many more years of reliable service. I def love the bags of gear lube. So much easier than the bottles or even the pumps. My 85 318i actually has a fan shroud. Maybe there was a mid year change or someone retrofitted it. You’re right in how hard parts are to find for these early e30s and esp the m10. I’ve had to cancel a few orders as they haven’t been able to provide ship dates after weeks on order. Keep the content coming!

[@DayOffDIY]

Thanks Rob! Thats the goal, even if I dont keep it at least everything will be taken care of for the next owner (with the exception of the paint i think lol) the bag of gear lube was a game changer! interesting... I wonder if it was just a 84 thing or what... no issues so far but im still thinking about the fan replacement since you mentioned it. Same goes for you my friend! your views and subs are growing and youre getting more comfortable with the camera!!! BTW- I just switched editing software from Splice to Adobe Premiere Rush on mobile. If youre using splice from my recommendation earlier, id give this adobe program a try, its much more comfortable to use, and more intuitive. Cheers!

[@robsweekendgarage]

@@DayOffDIY thanks Alec. I will give the Adobe software a try. I have been using splice and figuring it out. Since I kinda have just been shooting straight thru haven’t had much editing to do. But I want to start showing more of the process rather than just shoot overviews. Thanks again for the compliments and support. It’s a fun adventure!

[@krokokiel6360]

Ever time you go into a Taco Bell, I wished we had that in Germany too… so jealous

[@DayOffDIY]

hahah let me tell you, if you ever come to the states, DO NOT go to Taco Bell lol. There are much much better tacos all over the place than fast food. I do love my tacos, but i look for the authentic ones :)

[@e30restauration11]

Hello, just for prevent rust and bending on the chassis you better jack it on the inner frame rails in the front ;) Greets from Germany

[@DayOffDIY]

good idea! thanks!!!

[@lieutenantdan8170]

Man that transmission fluid was brand new

[@DayOffDIY]

Straight up! couldve rebottled it and reused it lol

[@jdm132]

Very cool just got mine last year so very helpful diy

[@DayOffDIY]

Glad you enjoyed it!

[@littleboydesign]

My 1984 318i came with a fan shroud 😅

[@DayOffDIY]

really?!

[@lloydmubika]

I do not buy washer fluid also .i mix water and little dishwasher it does the job

[@DayOffDIY]

never tried dish soap! might have to give it a shot. I know it can damage wax and clear coat, or at least strip it, so i wonder if it will affect the paint after blowing off the glass and onto the sides and roof of the car...

[@littleboydesign]

I use only 5-30 Castrol regular oil

[@DayOffDIY]

in the M10 engine?

[@KhaoticKrozier]

Another great video! Where do you get your scotch-brite?

[@DayOffDIY]

Thanks Andy! I had a bunch saved from the shop days but just ordered a bulk box on Amazon, I put a link for the same box in the description of the video! Good to see you again friend

[@bogusienombre355]

can you please list the Amsol products you used on this episode?

[@DayOffDIY]

Gladly! AMSOIL PART NUMBERS & PRODUCTS: AMO1G Synthetic 10W40 High Zinc Oil FLSHCN Engine & Transmission Flush AMOQT Synthetic Multi-Vehicle OE ATF AGLPK Synthetic 80W90 Gear Lube APICN ORMD PI Performance Improver EA15K51 AMSOIL Oil Filter

[@bogusienombre355]

@@DayOffDIY Thank you much.

[@randyo308]

Great videos. Well presented. Tbh I’d love to see your clean maiting surface 😂😂

[@DayOffDIY]

Randy youre officially the first person to hit on me in the comment section 😅 heres your award 🏆

[@randyo308]

lol I'm honored. All joes aside great content!@@DayOffDIY

[@DayOffDIY]

thanks randy!

[@Deftones445]

11:11 my doctor giving me a circumsion when I was born

[@DayOffDIY]

lololol

[@Berti_00]

What torque wrench are you using.

[@DayOffDIY]

Its a snap on 3/8" electric torque wrench. let me find the link for you. shop.snapon.com/product/TechAngle-Models-(2%25-Accuracy)/3-8%22-Drive-Flex-Head-TechAngle-Torque-Wrench-(5%E2%80%93125-ft-lb)/ATECH2FR125B

[@lukemallory7832]

What got you into BMWs? Love the videos!

[@DayOffDIY]

I got a job offer at an independent BMW / Mini cooper shop, worked my way up the tank there for 6 years and then joined the fire service

[@DayOffDIY]

Thanks Luke!

[@harpindersingh7197]

Which amsoil version should i use for my n52b30?

[@DayOffDIY]

A full synthetic 5-30 is what I would do. What i recommend is going to www.amsoil.com they have a feature if you make an account called my garage and if you punch in your vehicle info it will give you every fluid and filter spec recommended for your car including torque specs, so it makes it really easy! Im working on becoming an amsoil dealer so i can pass some savings onto my viewers hopefully soon!

[@harpindersingh7197]

@@DayOffDIY ohh thats great! Thanks bud

[@joelleer5982]

Im doing a 1988 325i Its in really good shape . Where you at anyways? im out in Modesto ca.

[@shehzadatif1]

I would rather push the brake pedal than trying to get that broken tool working.

[@DayOffDIY]

i hear ya, it was a pain in the ass! I was by myself in the garage though so no second person to work with

[@valodik5794]

HAHAHA this make me laugh every single time 6:59

[@DayOffDIY]

:)

[@wnturck]

Is this car rear wheel drive? How hard would it be to do a manual swap?

[@DayOffDIY]

It is rear wheel drive, I think it would be easier than a modern vehicle that’s for sure!

[@NOAHCASAS]

@0:52 LMFMAO U.S. OF A. WHERE THE HELL DID YOU GET THE (OF) FROM IT'S ONLY U.S.A. LMFMAO HILARIOUS

[@DayOffDIY]

if you spell it out, Its called United States OF America :)

[@notRafa1]

where do you guys in europe buy your car parts?

[@DayOffDIY]

not too sure, maybe someone can chime in. I use FCP Euro in the states

[@notRafa1]

@@DayOffDIY Will check it out. Nice vídeos by the way. +1 sub 💪🏻

[@notRafa1]

one quick question. you removed all the oil from the engine and put new oil back in. BUUUUUUT. shouldnt you remove sparkplugs and just make te engine rotate to pump the new oil into the system and then you put sparkplugs to turn it on? (it seems likke without this you are running without oil for the first start )

[@DayOffDIY]

technically if you had a brand new engine this is what I would do, but there is residual oil on the bearings and in the rotating assembly so theres enough lubrication for a safe start up. Also the oil filter housing usually holds some oil to keep the oiling system primed

[@joe-ix1pm]

Changing fluids in a non U S of A car.

[@DayOffDIY]

thats correct, but at least the products going in are domestic

[@jollyroger4494]

Algorithmus Algorithmus Algorithmus Algorithmus Algorithmus Algorithmus Algorithmus Algorithmus

[@DayOffDIY]

MVP!MVP!MVP!MVP!MVP!MVP!