Old video but thank you, saved my butt, it’s getting harder and harder to find guys like you that fix their own stuff, thanks you for this
@ogsgarage78899 ай бұрын
An oldie but a goodie still applies. Glad it helped you out. Thanks for the good comment.
@davidchristian602 Жыл бұрын
Got to give you a big THUMPS UP!!!! You were the only that showed it with disc brakes. Jimmy been sitting for a year dreading having to do it. It finally took the wife saying I call the scrape yard n there coming Tuesday to take it. And your video. Had it down to the T. Thanks again
@ogsgarage7889 Жыл бұрын
Glad to help...Thank your wife for tough motivation!
@nelsontucker4366 Жыл бұрын
Just viewed your video I've done the same thing many times but it's been years. I also noticed Rush Limbaugh playing in your shop. I sure miss him too.
@ogsgarage7889 Жыл бұрын
Ditto
@jheetman4 жыл бұрын
i liked the part where he said "Once you get that brake caliper off you'll be able to pull this rotor off". He was lucky, it often takes a lot of hammering and sometimes heat to get rotors off.
@ainstaink83122 жыл бұрын
I put a light coat of grease between the bearing hub and rotor
@testuser3167 Жыл бұрын
You forgot to add the additional profanity often required to remove them ;-)
@cjbigsexy99904 жыл бұрын
No videos of rear stud replacement for this vehicle on KZbin I suppose!!!! Thats what Im looking for!!!!
@clowe81 Жыл бұрын
The most realest repair job I’ve ever seen in my life. 😂😂 You definitely deserve praise for show casing this video. Question, do you have videos on just replacing the two hubs on the rear of a 2008 4x4 4.2 liter without removing axle?
@ogsgarage7889 Жыл бұрын
SORRY I DO NOT. Thanks for the good comment.
@testuser3167 Жыл бұрын
I think the hubs are part of the axles, so you can't do one without the other???
@ogsgarage7889 Жыл бұрын
@@testuser3167 Hello, That's correct
@Stayfit503 Жыл бұрын
Great video God bless you🙏
@pj97313 жыл бұрын
Nice to hear Rush Limbaugh’s voice in the background. R.I.P.
@ogsgarage78893 жыл бұрын
Ditto's
@MicroSoftner3 жыл бұрын
Miss him unbelievably , radio is no way as good!
@salvadororozco49633 жыл бұрын
Gracias por compartir su conocimiento Saludos desde México
@TheANDREU6032 ай бұрын
Спасибо за видео! Вас смотрят в России.
@danieltierney64892 жыл бұрын
Hello from Sycamore! I’ve been dreading this project, really worried the ends of my axles are going to be pitted since the axle keepers have been bad, everything I’m touching is original. 03 Trailblazer with almost 230k Wish me luck ! Lol
@ogsgarage78892 жыл бұрын
Great news, Those axles are tough, but best to check them before putting new bearings and keepers. Overall the job is not that hard. Do the deed and you'll have the power. Good Luck
@eddie2dope1 Жыл бұрын
Just got done pulling the rear bearings out and I went to put the new ones in and they just slid right in... is that how that works? I thought I would have to hammer them in???
@ogsgarage7889 Жыл бұрын
They should not slide right in...sounds like those are the wrong bearings for that hub. I would not use them like that.
@calculator4796 Жыл бұрын
Tried this but I pulled the seal out first. Then inserted the bearing puller and tightened up the nut with washer on the outside. However after a few whacks of the slide, the outside wall of the bearing failed and pieces flew out and the roller bearings were free to fall out. The metal casing of the bearing is still in there and will not come out with that puller style. Is there any other puller that will work? The inside wall is intact all the way around. I have tried the L shaped piece with the slide hammer but it just will not budge.
@ogsgarage7889 Жыл бұрын
Hello, As long as the puller has somewhere to grab you should keep trying to remove the chase with your puller. It could take a lot of hard whacks. As I mention in the video they can be tight and stubborn. Perhaps you need a stronger puller. There are screw type pullers perhaps you rent that might work for you. Let me know how you do.
@evandee85622 жыл бұрын
hey i have a question i saw that you remove the little bolt with a 5/16 wrench the but you were undoing the bolt clockwise is that the camera or its just me? Also with the hole that the cylider goes in is damaged ?
@ryandefelice73145 ай бұрын
Was it jumping/hopping?
@alano28754 жыл бұрын
Great tutorial. I've got the mystery growl Right Rear. Question: The bearings run directly on the axle shaft right? What are the chances I'll have a bad bearing and not need a new axle shaft? I like the idea of just replacing the axle to be sure I'll get 'er done in one day, but I don't want to completely waste money either. Advice? Buy Axle or Find out when I take it apart?
@ogsgarage78894 жыл бұрын
Hello Alan, The bearing does run directly to the axle and could possibly be defective. Chances of the axle being bad are slim unless the bearing was dry or damaged and spun scoring the seat. If the axle is not scored or have a lot of wear I would not replace it. If you check the bearing and it's okay check your spider gears for wear or play. I'll assume you have oil in there.
@alano28754 жыл бұрын
@@ogsgarage7889 Thanks. I'll give it a go. Plenty of oil. I'll get in there and figure it out. Thanks for the advice!
@jeremylove11222 ай бұрын
Jesus christ it's like listening to the clear eyes guy
@Wheel-15 жыл бұрын
Was that the problem ? I Have a noise similar but almost seems to vibrate like at 30 mph makes weird sounds going down highway
@ogsgarage78895 жыл бұрын
That was the problem for me. Noises could be dry or bad bearings which could also cause vibrations at higher speeds. Mostly it would be in the front wheels. Still you could have more than one problem ranging from bad ball joints to bent rims causing the vibrations. Check your differential for oil and proper additive.
@Wheel-15 жыл бұрын
@@ogsgarage7889 Thanks for the quick reply
@ogsgarage78895 жыл бұрын
I don't know if that helped any. Another thing to look at is the drive shaft universals, at low speeds your good, but higher speed they vibrate.
@jeffreyguralski10693 жыл бұрын
Thank you sir
@toolinhand5 жыл бұрын
Good info. Subbed.
@AVVS0meness3 жыл бұрын
Hey thank you for the video! I'm attempting to do this replacement on my Saab 9-7x which is very similar. I thought it would be the exact same operation but I found a spring locker in the differential and I can't remove the axles like you showed. Is there a way to remove the differential locker?
@ogsgarage78893 жыл бұрын
Hello, I'm not sure exactly where that spring lock is located. I'm not familiar with the differential on that model Saab. Perhaps if you describe the lock and it's location I can help you or perhaps someone who is reading this can give you better advise...please let me know.
@AVVS0meness3 жыл бұрын
@@ogsgarage7889 My differential looks the same as yours except for these springs in the middle. Here's a picture - imgur.com/a/0HHyMTt
@ogsgarage78893 жыл бұрын
This guy might help you, give it a try. www.justanswer.com/saab
@AVVS0meness3 жыл бұрын
Thankfully I figured out how to take apart the differential! Thank you for your help. I am now removing the bearings. How long did it take you with the slide hammer? I’m having a really hard time pulling out the old bearings.
@ogsgarage78893 жыл бұрын
Hello, Yeah it takes a while unless you have a real heavy duty puller. You can try heating it with a torch. Keep at it, Good Luck@@AVVS0meness
@joshuwal213 жыл бұрын
i have a ? I’m not a mechanic just keeping my junk on the road lol if i swap the hubs out with the bearing do i have to mess with pumpkin and gears ?
@ogsgarage78893 жыл бұрын
No. If you're just changing the hubs and that's the only problem leave the gears alone.
@stonercazz420 Жыл бұрын
big ups
@terencescott39574 жыл бұрын
I'm getting a wobble at start then it turns to a vibration when I get up to speed. I saw in another video that hearing howling is a problem. I hear that all the time. If I have to do bearings where do I get that puller?
@ogsgarage78894 жыл бұрын
You can purchase a puller at any auto store. Harbor Freight has them also.
@terencescott39574 жыл бұрын
@@ogsgarage7889 Thanks OG..
@EnriqueSanchez8 ай бұрын
what is the tool called the one you use to hammer it in?
@ogsgarage78898 ай бұрын
Hello, It's called "Bearing Race and Seal Driver" You can purchase them at auto stores or Harbor Freight or purchase it on line. They range from 20.00 and up depending on how elaborate you want to get. The one I'm using is the Maddox MD10-1 Kit. Maybe you can get them cheaper used. Good Luck
@cloudoftime4 жыл бұрын
You do not need to take the spider gears out, and you shouldn't. Just leave the gears in place.
@ogsgarage78894 жыл бұрын
Wrong! Check your gears for shaft wear, chipped and broken teeth...always! When you have things apart check everything!! You don't want to put everything back only to find you have an egg shaped shaft hole or broken gear teeth.
@cloudoftime4 жыл бұрын
@@ogsgarage7889 Not wrong! If there is no evidence of shards or broken or worn gears (you don't need to take apart the spider gears to added this, simply turn the shaft to check the various areas) then there is no reason to pull it all apart, requiring that it must all be lined up correctly again. Sorry, but this is just unnecessary.
@ogsgarage78894 жыл бұрын
Wrong again! Worn gears do not always show shards of metal and you cannot turn your drive shaft around to check your drive shaft gears for egg shaped wobble. They are easy to remove and check. Highly recommend you do that. No reason not to it takes minutes. If you wish not to go at it at your own risk.
@cloudoftime4 жыл бұрын
@@ogsgarage7889 I was able to turn my gears. You can check for wear when you do that. Everything was fine. Easy to inspect.
@johnalder2 жыл бұрын
alex jones in back ground
@tmaccc24 жыл бұрын
You have any idea how manY times you said uh 62
@ogsgarage78894 жыл бұрын
Wow! You have no life, do you?
@tmaccc24 жыл бұрын
@@ogsgarage7889 yes sir I do. I even studied English in school. Anyway good video!
@gldixon864 жыл бұрын
Thank you I will be doing that this year
@ogsgarage78894 жыл бұрын
Let me know if I can help.
@karrenrenner4645 жыл бұрын
Tune the radio off!!!!! Rush Limbaugh???
@ogsgarage78895 жыл бұрын
Seriously, that's what you got out of the video?
@gunzmith29r5 жыл бұрын
this is why democrat communists kkks are the laughing stock of the entire world
@Одиссей-в3л5 жыл бұрын
Дядя похоже к стакану не раз приложился.
@DaDeerHunah5 жыл бұрын
I hate the trailblazer. 94 corolla was the absolute truth