Resiners Product Review-(Are they worth the money?)

TUTORIAL DESCRIPTION:
In this tutorial I am reviewing two products from ‪@Resinersofficial‬. Their airless bubble removal machine and their epoxy resin. For this review I decided to use another resin to compare in the machine that was equal in comparison so that it was a fair review. I mixed up 3 oz of each resin, I marked the cups to tell them apart and put them both in the machine and used the 5min timer. then removed the resin from the machine and both had no bubbles except a few surface bubbles. I spritzed them with alcohol and they dissipated. The next test was to use the resin's in a mold, so I added the resin's to my 6 cavity heart mold and marked the mold to separate the resins.
I poured each cavity with the selected resin, added the same alcohol ink and white and swirled them. Let them cure the same amount of time. The Resiners does take longer to cure, which it does state that in the instruction manual because it is a very low viscosity resin. All in all the machine does remove bubbles like it says it does, this would come in handy on the table top versus my big vacuum chamber that is across the room, more convenient. The resin is as described, clear, high gloss and bubble free, it just takes longer to cure. I would recommend these products to fellow resin artists. #resinart #resin
***************************************************************************************
Support my channel by buying me a coffee!!!
buymeacoffee.com/resinmeup
***************************************************************************************
LINKS TO DISCOUNT CODES:
INTO RESIN: 20%-www.intoresin.com/discount/MA...
ISTOYO: 10%-istoyo.com/discount/MARY?ref=...
LET'S RESIN: 10%-letsresin.com/discount/Mary10...
TEEXPERT: MARYKLAUS
RESINERS: ray20
***************************************************************************************
LINKS TO PRODUCTS USED IN THIS VIDEO:
RESIN:
resiners.com/products/resiner...
AIRLESS BUBBLE REMOVER:
resiners.com/products/resiner...

[@jenniferr8195]

Mary, better late than never and it's always good to hear the review from an artist we trust, even if others have reviewed it already!

[@resinmeup]

You are so right Jennifer as always, thanks for reminding me. 😊🌻❤

[@carolynfrancis-mclucas6185]

Sylvia says, "Why do I get blamed for EVERY hair"? 🥺 She's being very vocal about it. 😆 Feed me Mary (Seymour), feed me all night long.🎶🎵🎶 Thanks for doing this resin comparison and bubbler review. It saves us time and money when we see the products in action. Plus you showed us how the bloom did in Resiners resin. And mentioned, after prep work, that both resins were a good temp for blooms. Thanks again.😊

[@resinmeup]

Your welcome Carolyn🌻😊❤

[@pulsetkr45]

thanks for the comparison....i loved all the hearts...lol...

[@resinmeup]

Your welcome and thank you🌻😊❤

[@user-nc3vf5fr9b]

Oh Sylvia, you sound just like my Gary! I really miss his meows and he was also very persistent too! Thank you for the comparison. I already have the machine, but I may give their resin a try when I order next. Terri

[@resinmeup]

Your welcome Terri❤😊🌻 there is a discount code in the description box if you decide to order. 😊

[@caroltweddle9247]

❤❤❤

[@resinmeup]

❤😊🌻

[@bonneeley5670]

What machine do you presently use? And is it the same dimensions as this one? do you always check the temp on your resins before you pour them into you your moulds? And what is the temps you are looking for? And do you use different temps for different types of resin? I am a newbie just watching, trying to figure out what is what. And what to invest in before taking the leap. Thank you for the comparisons.

[@resinmeup]

Bonnie, I have for years used an industrial size vacuum chamber that has a 3 gallon tank and is attached to a pump. If you go out to Amazon and just search vacuum chamber, you will see what I'm referring to. This little machine has everything in one and is way smaller, its more of a desktop size and meant for smaller amounts of resin and lower viscosity resins( lower meaning thinner). I don't ever test the tempature of my resin unless I'm doing blooms, but in this case since it was taking a bit longer with the machine, I wanted to make sure my resin wasn't getting to warm and possibly overheat and cause a flash cure. Does this help?

[@lauriebennett6257]

Mary, my question is, which resin did you use for your white? Was it just one, or did you use the T Expert with the T Expert white and the Resiners with the Resiners white? It looked like you just used one. Could that be why 3 turned out right and 3 dropped into the bottom? Combining resins? Or am I way off base?

[@resinmeup]

Laurie, I mixed each their own white.😊

[@miriampalmer-golembiewski8483]

Where did you get the heart mold from?

[@resinmeup]

Miriam, I made it myself.

[@miriampalmer-golembiewski8483]

@@resinmeup Wow!! I love those hearts.