Restoration CAT 966D Loader Complete Engine | CAT 6 Cylinder Engine Restoration in Pakistan

[@pakistanitruck]

Click here to find parts for your truck’s engine www.prodieselparts.com/?affid=4

[@tamimtahri3963]

😂😂😂😂😂😂😂😂😂😂😂😂😂

[@stigmarto]

No thanks

[@jumpinjojo]

This is not how I imagined the CAT Diesel engine rebuild center would look.

[@johnnym4400]

They could probably do that with their eyes closed, and have all the torque specs memorized by heart. I have to give them credit. Not to mention it's probably 110ﾟand they're working in direct sunlight...

[@fikesbiked]

Even the best have to outsource sometimes

[@nikaawan9555]

@@johnnym4400 exactly

[@johnnym4400]

You know it's hot in Pakistan when they're pulling apart a Caterpillar engine outside, and not in the shop. Us as Americans have to wear the fancy $300 boots the mechanics gloves, etc., These guys are out there with flip flops on, and they're kicking ass!! GREAT MECHANICS!!! Respect from 🇺🇲 !!

[@That_dawg420]

This is why yall keep loosing to farmers. Be simple

[@mikeguthrie5432]

I am always amazed at how industrious these guys are that overhaul these engines. No power tools, just hand tools and patience. YOU GO GUYS !

[@Mutic-mutabor]

Всем кто досмотрел до середины и подумал, что они его сейчас помоют и соберут, салют!))

[@vitkol3054]

Не царское это дело.

[@rodneymorash4013]

Это пиздец натуральный!!!))))

[@АбокарГасайниев]

@@rodneymorash4013 они блять моют собирают обратно не ремонтируют толком а если увидишь как они блок головки и цилиндры ремонтируют надо будет карвадол выпить сначала 😂😂😂😂😂😂😂😂

[@anthonylawlor9130]

Amazing mechanics, just imagine if they had some modern tools, a shop would be a big help.

[@Leonid_01]

Думаю предыдущий ремонт этого двигателя они делали месяц назад. На следующую капиталку они записали его через месяц

[@АлександрНиколаев-м8р]

Я в ахуе.я чот не понял,они по прикручено у шкиву херачили кувалдой?

[@MrArs174]

@@АлександрНиколаев-м8р похоже что да)

[@АлексейМаксимов-т5я]

@@MrArs174 почему они не нагрели шкив, могли развести на нём костёр.

[@forest_bears8223]

@@АлександрНиколаев-м8р а чё так можно было?

[@АлександрНиколаев-м8р]

@@forest_bears8223 судя по видео,можно.но это не точно.

[@user-rt7ak2li1p]

Вкладыши ставит солидный мужик в очках - главный механик

[@kirillshevchenkooo]

Вахахах

[@ДронДрон-ш2н]

Вкладыши помыли и снова в бой.

[@НашСемейников]

60 % пакистанцев окончили только начальную школу , а этот наверное среднюю осилил .

[@rage3225]

@@ДронДрон-ш2н если корни не износились, то почему бы и нет

[@DmitriyT1000]

Ну впрочем ко вкладышам, меньше всего претензий в этом "ремонте". Они ещё этих индейцев-сборщиков переживут, с такой жизнью. А вообще, все это крайне печально...

[@Alex-1105]

Как же они любят , мотор на земле перебирать . Тряпочкой , с песочком , масляные каналы промывать . Я понимаю , что это всё не от хорошей жизни. Но верстак , сварить то можно.

[@proikeastorm]

поверьте у нас точно так же любят заниматься половой жизнью, и на заводах при наличии верстака люди любят все делать на полу. сложное не объяснимое явление.

[@Miha_Poo]

Смотрел и думал об этом. Есть ещё пара мыслей которые не стану озвучивать чтобы не обидеть ни кого. Но если в двух словах, то не ужели настолько бедная страна что нельзя сварит верстаки и нормальные сьёмники? Побелка в стране закончилась? Цех в котором коленвал шлифовали тёмный, одна лампочка и стены "чёрные"... Но каким то невероятным образом у них всё получается и всё работает.

[@user-6x6truck]

@@Miha_Poo долго ли работает

[@alexandrrivo1208]

*_ну атомную бомбу всё же смогли создать, остальное уж как пойдёт !!_*

[@whs4039]

А никого не смутило что в конце пихло которое ставили в погрузчик было не то что в начале они разбирали? )))

[@ac9110]

The amount of improvisation these guys do. It's an inspiration.

[@olegkurizin4942]

Смотрю и каждый раз болдею от работы́ этих ребят

[@pullimgsm]

What the????? Trying to pry and pound the counter balancer off!! Without taking the center bolt out that holds it on. Oh boy

[@goose300183]

I really admire how they manage to do things without specialised tools, it can be quite impressive! "OK, we're going to need the gear puller to get this crank pulley off" Oh, you mean the welding torch, scaffolding poles and sledgehammers? Coming right up boss.

[@CaptHollister]

It's much easier when you don't care about the environmental impact of your work or the effects of your sledge-hammer blows on the longevity of the engine.

[@ronkilmer8991]

I saw the OSHA and the EPA reps hanging out in the CHI shop, ,, but no where close, I also noticed the workers are all wearing safety thongs

[@erik4264]

@@CaptHollister it’s not that they don’t care they just work with what they have.

[@fabianfabian8150]

@@CaptHollister dezyus

[@Forbiden_Ways]

All that just to not replace bearings metals

[@mastermindd]

There is a reason why the Indian subcontinent prospered for thousands of years. You guys are genious and hard working. I hope you'll prosper in the future. Greetings from Hungary

[@masoodfarooq3938]

They are from Pakistan

[@TURGENIY]

Мойка двигателя очень понравилась.Распыление химии весьма технологична! Лет пять и новый мойщик,а того в земельку...двигатель то дороже чем он.

[@wanttobeforever8107]

Такой новый 6-ти цилиндровый дизель от Cat будет стоить дороже чем жизни даже 5 таких смугленьких ремонтничков...

[@НашСемейников]

В этой химии ничего страшного нет , щёлочь гидрооксид натрия и ПАВ лаурит натрия ( содержится в шампуни ) . Максимум кожа слезет , местами . И волосы будут шелковистыми .

[@СалаватГубатов]

он еще тебя может пережить....

[@ГерасимГабанов]

@@НашСемейников Это поначалу тяжело, а потом привыкают )))

[@SamDru]

24:38 I trust this guys expertise on blue chair.

[@sayit462]

Pakistani truck. A Big Thank You for showing as those hard hard working People.

[@albinklein7680]

They use the old trick from my father. When working in the sand, never cover up the connections for the injector lines! The sand will cover and protect them. Good job!0

[@dipling.pitzler7650]

Absolutely! The lines have such a big diameter the sand will just go through into cylinder then out of exhaust . Lol

[@ابومحمد-ف3ف3ف]

أهل باكستان يستحقون التقدم والازدهار والقوة

[@scottschenk5456]

Primitive surroundings and tool's to us is an average workday for their skill! R&R is OK but their machinist has really good equipment and skills.

[@dagenhamdave2611]

Nothing like a clean working environment There’s no excuse. You can’t say they can’t afford it. To rebuild a cat engine costs thousands, to use work benches and work on clean floors cost nothing in comparison

[@pastytit]

Never mind that. Look at the oil everywhere.

[@stevenmcgregor2219]

They didn't rebuild it I watched closely the just cleaned up the parts turned the crank is all they did really

[@helvacihelva]

It's always healthy to have some sand in the engine.

[@monstermirror2]

@@stevenmcgregor2219 Lol. The block got new cylinder liners. New pistons. Oil pump looks new as well.

[@andresouza2314]

@@helvacihelva surely. Once I was tryed to assemble a engine without dust... They get locked at first hour!

[@МАКСИМОСКИЛКО]

Двое работают трое сидят !!!! Расклад ващпе огонь!!!!!))))))

[@АндрейГалкин-ф9п]

Кто не работает тот ест.

[@islamiclecturesdatabase6135]

MashAllah, Salam to my Muslim brothers in Pakistan from Bangladesh.

[@АлексЛекс-в1д]

охренетительный ремонт))) с кувалдой, не помеченными поршнями, и тут , внимание! Все плохо, потому, что нет русского мата!

[@Prespera]

Поэтому и плохо разбирали)))

[@АндрейГалкин-ф9п]

Ну да, был бы мат и кувалда не понадобилась бы.

[@DosSkP777]

Я думал блок разлетится , после работы с кувалдой

[@Доцент-ь3в]

Без мата....вся капиталка напрасна

[@ТимофейЕлизаров-ч1ы]

Руки оторвать за такой ремонт

[@buzzroadguy]

Anyone else hear think these guys would love a snap-on sponsorship?

[@-ph1l1pn0rth-7]

Much respect to you Eastern men, a clean job well done.

[@benjaminbarlas7068]

Clean? Lol

[@sachem31]

@@benjaminbarlas7068 not in the literal sense, a clean job means that it wasn't botched along the way

[@geraldguenard4095]

It is hypnotising to watch these guys work on such big equipment with minimum tooling. these guys are very dedicated to there job. bravo, congratulation. GERRY G. from canada

[@ИгорьД-п3г]

Съёмник не не знаем,вишь ещё не разобрали а уже Хон на цилиндры наносит круто а вы на нас Русских наезжаете учитесь😄👍💪💥🔥⚡

[@bradheins3554]

I used to wash parts with solvent with no gloves, like these guys.my skinn to this day is damaged esp during winter months & had cancer issues later in my life, i did enjoy machine shop work with hot tanks & the work was fun love the smell of grease to this day

[@omeronardoni5304]

Congratulation to all the staff good job. In Italian we say RETTIFICA of the engine. Greeting from Rome 🤝👍

[@pakistanitruck]

Thank you! 👍

[@awonabbas9501]

What a great fitting of an Engine well done ✅🙂

[@honestspirit56]

Love the video! But beating the balancer to death is not good! Please find or build a puller.

[@sqmotorsports9230]

Normally I love watching what these guys can do with limited resources but this one was rough. The whole beat on the crank pulley thing.... oy.

[@MarkfromNewYork]

Yeah that was intense

[@georgegonzalez2476]

Yeah, and this isn't the first time we've seen them taking the torch to the shaft, not to the hub. Nuts.

[@toms641]

i'm no mechanic, but I was watching an American guy rebuilding an engine. He said you shouldn't even lay a lay a crank down in the floor. Seems it will want to sag. It should stand vertically, or better yet hang vertically. These precision parts are made in places like America. Americans understand it better.

[@saintsarecoming13]

@@toms641 I'm a heavy duty diesel engine specialist for a rather large manufacturer and the whole "don't lay your parts down or they'll warp! Store them vertically!" Is all a load of crap. They tell you that you have to face the wrist pin snap rings up or down only, I tear engines down with them all different directions from the factory and I've never seen them come off from being installed this way. I lay assembled pistons on their sides and I've never seen it bend the rod. I've laid cranks down and I've never seen any ill effects from it. In this country we get so wrapped up in the theoretical BS that engineers shove in our faces that we forget how tough these parts have to be to withstand what they're subjected to in an engine for years.

[@ananthusg8015]

Most of these rebuilt engines won't survive a month brother, they just rebuilt it again and fails again

[@waliza001]

I love their puller in 8:39 and torque wrench in 26:57.

[@desertfox4921]

10 days warranty by 10 year old boys . This engine got more abuse in rebuilding process

[@forg0tin397]

All that sand will help polish the bearings and crank assembly.

[@charlescastillo8870]

Yes, and those Safety Opened Toe Sandals come in assorted colors to match there PJs

[@gthtw6140]

Я не понял, вы вал проточили, а вкладыши старые поставили? интересно сколько ваш двигатель отходит после ремонта.

[@MolodieVetra]

Под вкладыши фольгу надо было им положить

[@Venik56]

Вкладышы новые, если вас смутило что они их мыли - поясняю, их отмывали от консерванта.

[@ЕрмекБагинбаев]

@@Venik56 Не бывает консерванта на импортных вкладышах .

[@Venik56]

@@ЕрмекБагинбаев сколько комплектов вкладышей вы распечатали в Пакистане?

[@nadintkachenko5077]

вот такие видое мне по душе, а то эти 5 минутные ролики вообще ни о чём

[@keysautorepair6038]

The struggle is real people don't believe me give it a shot it's hard work being a mechanic.

[@RandomDude989]

Torque spec for the main bearings is "tight".... lol.

[@jack_timber]

Plus half a turn😱

[@johnhall3824]

This would cost aprox. $17,000 at Stower’s Cat in Knoxville. I wonder what these guys charge? I wonder how long a warranty they give? 15 minutes or 15 years. . . 😅😂🤣

[@andresouza2314]

Cat will sue them for unauthorized maintenance 🤣

[@javedsultan4830]

@@johnhall3824 it lasts a life time.. charges less than 200 dollar

[@clcampbell85]

pffff…torque wrenches are for infidels

[@jamesswetland5019]

Cleaning in the dirt pounding on the fly wheel with a sludge hammer. This is really fun to watch!

[@The-r4k]

Love what these guys do in Pakistan, I don't think there's anything they can't fix there with basic tools

[@jepper80]

Sometimes I wonder if they use the sledge hammer too much.

[@nanarchiste1307]

22.39 basic tools lmao

[@hunter51553]

Jimmy get the sledge hammer nah not the 5lb get the 30lb we gotta take off the crank pulley. Lmao

[@yalnzqurd6821]

آذربائیجان کی طرف سے آپ کو سلام!!! 🇵🇰🇵🇰🇵🇰🇵🇰🇦🇿🇦🇿🇦🇿🇦🇿

[@MrTonyballony]

I’m glad they all have protective sandals

[@ozloon2000]

Japanese safety boots

[@doiron12]

those are steel toe

[@mohamede.1842]

Tabaarak al Ra7man mashALLAH. Talented Improvisers who happen to be very good at their job. Zindabad Pakistan

[@Craneman4100w]

Wow, in every context possible, wow.

[@Dmitrii-yg3bv]

Мотрист такой деловой на стуле сидит, ему всё подают как стоматолог, но когда они стали трубой коренные шейки тянуть я чуть с дивана не упал.

[@Парень-э7п]

Мне тоже в голову пришло что моторист считает себя высокий по чину а тот запчасти подвал ровно и брежно

[@Human-iu2wp]

Так в Союзе и тянули коренные , и головы , и я тянул в своё время . У кого тогда в гаражах были динамометрические . Один раз где-нибудь раздобудешь его , затянешь трубой , динамометрическим проверишь , так несколько раз , в итоге подбираешь определённую трубу и руки запоминают усилия и в каком месте за трубу браться . Всё бегает потом без проблем .

[@Venik56]

@@Human-iu2wp да, на тех движках что союз делал этот номер проходил, сейчас без "динамы" затянешь кпп, так последний поршень или клина даст или масложер начнется

[@user-rt7ak2li1p]

Съемник шкива оригинальный

[@antoniomontana2232]

На конусе сидит. Прикипел. Никакой съемник не возьмет. Просто сразу надо было нагреть.

[@ЕвгенийСанин-у9ъ]

Не только славяне могут в поле, монтажной, мотор откапиталить 👍, однозначно 👍👍👍

[@Dyadya_Serezha]

Так много индусов приезжало учиться в СССР, насмотрелись наверное 😂

[@elman8598]

@@Dyadya_Serezha Те были индусы...а эти пакистанцы.

[@Парень-э7п]

@@АнтонСтроев-ъ4ы я думою такие хирурги тоже у них есть

[@vitkol3054]

@@elman8598 Одно и тоже.

[@elman8598]

@@vitkol3054 Тогда ты не грамотный.....

[@lightningstrikestwice2935]

Loved the cylinder ridge remover! Not a ratchet or power tool in sight! Good God are we spoiled!

[@lichee6181]

Cat 3306 Turbo👍🏼👍🏼

[@Draxindustries1]

Far more interesting watching these truck engine rebuilds than elsewhere in the world, US /Europe ect. These guys have basic hand tools yet they get the job done. Excellent engineering work. The only thing IMHO they should have done is washed the engine down before dissaaembly. Great video as always.. ❤️

[@MrZimmaframe]

Not Engineering, but mechanics

[@Draxindustries1]

@@MrZimmaframe Of course its engineering. They stripped & machined the engine parts just like any other engineering shop would do.

[@FrozenHaxor]

Engineering work? Please...

[@Draxindustries1]

@@FrozenHaxor Please? Why would you reply please? It IS engineering work.

[@FrozenHaxor]

@@Draxindustries1 You should figure stuff out before throwing out big words randomly. Let me quote Wikipedia for you since you're too lazy to do it yourself: Engineering is the use of scientific principles to design and build machines, structures, and other items, including bridges, tunnels, roads, vehicles, and buildings. The discipline of engineering encompasses a broad range of more specialized fields of engineering, each with a more specific emphasis on particular areas of applied mathematics, applied science, and types of application.

[@rulezznv7495]

ИСКРЫ ИДУТ ПРИ РАСТОЧКЕ... АХАХАХХА ЖЕСТТЬЬЬ )

[@ryannavarre4161]

I've been wanting one of those double ended non ratchet socket wrenches. Now that I see it's a slide hammer also I'll have to get 3.

[@unclee464]

mother nature will be happy with their environmentally friendly processing

[@vader449]

Great video I enjoy watching you guys fixing stuff

[@bilallsalod7081]

Lol the whole episode looks so comiclac but these guys are good especially when you have to work in a harsh enviorentment. Salute to you guys 🎓

[@thebaconwhisperer14]

I thought for once they're on a paved road/lot/ally but then I realize it's just so much oil soaked in the ground that it only looks paved.

[@MrDonKastilio]

Надо ребятам с цеппелин рус показать, как движки перебирать на катах)

[@JustMe-mg6vw]

I didn’t figure they could use primitive means to turn the crankshaft.....but great respect for their ability to take the process as far as they do w/ limited technical tools....

[@durango8882]

Truly amazing.

[@snarknado6430]

Primitive 😂😂🤣

[@buellb0y]

That lathe is the exact same machine that would have been used in the “western world” back in the 1950’s.

[@snarknado6430]

@@buellb0y Right tho?! Pretty insulting to say primitive

[@Mechanicalshort77]

kzbin.info/www/bejne/gn-rl6mmfM1khKM

[@rickyscheiderer6442]

I think these guys do ALL Cat remans..

[@anndivine9989]

Did I dream that or did they re grind the crank then use the old bearing shells, how is that going to work.

[@williamb6869]

i imagine they use oversize bearings do you know what is ????????

[@jackdaniels9401]

Its going to work baby..like hard nite of making love. over n over n do it again until the shaft weaks. then u use herbs to make it work again..👽

[@johnfleury5430]

Cat's technicians quote unquote parts changers is the real designation should learn a lot by watching this team

[@nickc7494]

Utmost respect to the work performed!

[@seyhsamil5351]

Wonderful great masters👋👋👋 I love you Pakistan. Hi from Turkey🤘🤘🤘☪

[@ThisManTriggeredMe]

Did I miss something? How do you resize the crank and also reuse the old rod bearings? Wouldn't they be too small after grinding the crank?

[@buellb0y]

They didn’t resize the main journals, just the rod journals. Those were the main bearings they were reusing. The video doesn’t show the rod bearings going back in.

[@Thewicked]

its also a completely different motor they placed in the Cat...

[@deanlhouston]

While everyone else is admiring these guys for making do with rudimentary tools... I'm shaking my head at how they just dump the used oil and coolant and other fluids right in their workspace and just keep slogging through that slop every day without batting an eyelash. I mean as creative as these mechs appear to be, doesn't seem too far fetched they'd come up with a way to keep their workplace clean. It's not just unsightly, it's totally unhealthy, not just for them, but others too because when it rains all that oil seeped into the ground is going to run off somewhere. If you're gonna show a "pride in work" video, then have some pride in your work and keep your workspace clean.

[@mattisyrtos5434]

A very good team, it is always a pleasure to watch these videos....

[@bonesofsteel7162]

This is more entertaining than Bollywood movies....👍great job guys

[@vishalkanda7483]

Perfect way to mess up any engine.

[@dhiyael9127]

from Malaysia..good team . work.👍😍👌

[@ИльяИванов-ч4ь]

Это каменный век. все на земле, на кортах, тех жидкости в землю, все на глаз

[@khurshed1939]

Это не каменный век а условия такая и жизнь такая.Респект им .

[@ИльяИванов-ч4ь]

@@khurshed1939 что значит условия такие? они сами создают себе условия. условия у них как в каменном веке.

[@khurshed1939]

@@ИльяИванов-ч4ь Причина много для нормальной условия,это у вас в России есть возможности,большенство у нас тоже так собирают нету нормальный автосервиса на кусок хлеб зарабатывают не смогут покупать себе современный технологии (станки всякий,и т.п.).Или ты думаешь им так нормально?

[@michaeltarasenkoop2389]

Just look at all that safety equipment ! Sandles glasses. Head gear. Gloves steel tipped shoes. Dirt floor smoking. Near gas cleaning fluid but they get it done ! With what they have to work with !

[@jtg2737]

Not to critique here but I would like to see a torque wrench being used for tightening the connecting rod caps and engine head. I have yet to see a torque wrench used in any of the videos that I have seen and my question is how long do the engines last? It seems that a lot of work is done and that due to this the engine will not last due to improper torque specs. unless these mechanics have arms that "click" to the proper torque specs?

[@albundy8139]

Not to mention that they re-used head bolts, and the main caps, which I've always been taught to get new when rebuilding an engine.

[@CheaddakerT.Snodgrass]

Well considering it probably cost $149. To do this rebuild they are probably doing a great job and well worth it

[@northmanlogging2769]

@@albundy8139 new head bolts and main bolts is a fairly modern thing, mostly with high HP high compression diesels, as they use too small of bolts in the first place, older gas engines, and diesels they get reused all the time.

[@sergiohernan5574]

Como decimos aquí en México esos vatos a madrasos desarman el motor por eso no les duran las máquinas

[@northmanlogging2769]

@@albundy8139 I'll add, that manufactures like to sell parts... generally parts you don't actually need.

[@duramax78]

Matching the crank and using the same main bearings, I’m no mechanic but really, also not keeping track of where they go,,, wow.

[@aguimarmello9893]

Gostei ver a limpeza e cuidado no encaixar peças do motor , profissionais na mecânica. Brasil..

[@АкжолШамилов]

Салам алейкум из Кыргызстана 🇰🇬🇰🇬🇰🇬

[@170119911]

Точил, точил коленвал в итоге новый поставили

[@TURGENIY]

Не получилось чуток...соток на 500)))

[@kirillshevchenkooo]

Прикол

[@user-6x6truck]

@@TURGENIY 😂😂😂😂😂

[@DaMIR163]

да че там уж , при разборке кувалдой долбили по шкиву коленвала )))

[@Venik56]

@@kirillshevchenkooo прикол в том что на видео точили коленвал для 4-х цилиндр. движка, а у них 6-и. Думаю что после такого снятия шкива там получился прогиб

[@willywijtvliet6502]

super vakwerk een revisie op straat gedaan mooi om te zien

[@svenvanwesterloo173]

Echt een fantastisch kanaal om te kijken!

[@willsalazarramirez5139]

CHICLAYO PERU 🇵🇪 💪 🇵🇰 🇵🇰

[@lrdisco2005]

Hard working men with minimal tools.

[@roto89]

I’d love to see kt3406e’s reaction to this.

[@trevorholbrook3569]

It looks like organised chaos. How do the manage to keep track of all the bits. As to the state of the water table below. There’s me thinking living in a hard water area is bad enough…….

[@PenTann4]

Да какой это ремонт! А разрисовать трактор? А бампер метровый приделать?

[@СтаниславКурмыгин]

очень плохо подошли к делу

[@shibinasa1258]

അൽഹംദുലില്ലാഹ്,, iam india from down south kerala

[@matsur81]

Не пойму что произошло, они так долго мучались со шкивом коленвала, в итоге он легко снялся?

[@Ermolay77777]

это монтаж! )))

[@СебастьянПерейра-з7щ]

Болт наверно. Йобаний шкивок...час проебали

[@matsur81]

@@СебастьянПерейра-з7щ Я тоже думал болт, но они его вначале сняли, а потом когда ебашили он опять стоял. Они думали, что придерживая шкив ломами и бия по наживлённому болту коленвала, они разъединяться.

[@DmitriyT1000]

После такого демонтажа шкива кувалдой, этот коленвал можно выкинуть.

[@Quark15616]

@@DmitriyT1000 Нихера с ним не случится. Он в процессе работы колоссальные нагрузки выдерживает, а тут, подумаешь кувалдочкой помахали.

[@ZeeshanAli-js1qp]

Pakistan Zind abad. Keep it up bro.

[@Murphys2ndLaw]

A testament to how much abuse these Cat engines can take by the people… “repairing” them lol

[@johnmorgan1629]

Loved the use of the literal impact tools and manual (click) that'll do torque wrench as well.

[@Mstrofpup]

This is basically how its done anywhere tbf..

[@googlgfacef218]

yeah, only quality made engines worth repairing. NEVER REPAIR CHYNA ENGINES.

[@LucidDream34]

@@Mstrofpup I can say I've never rebuilt an engine and threw the rods and piston on the ground

[@alfilingenieros1253]

FELICITACIONES A ESTAS PERSONAS QUE TRABAJAN TODOS LOS DIAS....SALUDOS DESDE ARGENTINA

[@AttitudeAdjuster]

Amazing to watch a team work on large engines and proves that when things go bad then we still have people who can get things going again

[@edwardmartinez9459]

All the time wasted when a puller can be ordered and used in a tenth the time. Time is money.

[@michelletaylor5691]

For a while anyway....

[@lightningstrikestwice2935]

@@edwardmartinez9459 evidently not! Look around you! Do you see any automation power tools or anything else modern. Human capital is cheap!

[@MikeB-Android-Teacher]

@@edwardmartinez9459 - *They didn't even replace the bearings after having the crankshaft shaved which means that they're no longer the right size! What a waste of time they're basically just washing parts!!!*

[@edwardmartinez9459]

@@MikeB-Android-Teacher I agree but in that country that's the best they can do.

[@garrisong]

These guys do such amazing work and quick, all without ratchets and ratcheting wrenches or impacts. Very impressive.

[@user-rt7ak2li1p]

19:51 - сосредоточенное курение - идет выбор соток ))

[@zilzila]

Да-да, я тоже обратил внимание на это :D А далее, на 22:36 у него такой взгляд - он прям видит как рвутся связи между атомами при снятии стружки! И, таим образом, на атомарном уровне контролирует процесс съёма

[@rusrider7146]

Мы раньше тоже так с пацанами днепры и уралы перебирали. После обеда начали к вечеру поехали.

[@Matty.Hill_87]

Whta you guys can do always blows my mind, huge respect

[@ja1a100]

My dad had a parts washer like that, I was only six but I thought it was a lot of fun!

[@njm3211]

Yikes! One has to wonder how many times this engine's been rebuilt before. Much respect for them however.

[@eduardodudu5695]

very nice to see good people doing his work away from religious or political stuff as they really are, and not how many of us assuming they are.

[@socialimpact2094]

Excellent work ! The master and his crew deserved all the credit. Prerfect example of “Hard working + Talent “. The missing part in all Pakistan Repair videos is the “ professional working culture”. I grow up in a similar society back in 1970s .I worked in a car mechanic shop ( cleaning carburetors, and spark plugs etc). These workers do not have the concept of “ safety “ that we ( in USA) know. They learned skills simply mimicking their uncles / masters. The current “working environment culture “ is comming from generation to generation. For them “ this is the work conditions “. They are happy with what they are doing . The system will not change unless there is a enforcement by superiors (i.e. government ) This is something can be achieved if the government comes up with better training, affordable power tools, improved “ working condition” standards, training and imposing the laws. We are talking about “paradigm shift” here. So, once implemented there will be improved efficiency and better human health, and prosperity of the society. Like it is happening in developed countries. For example ; In USA history “Civilian Conservation Corps” had achieved the paradigm shift and improved standards for the workplace safety.

[@MolodieVetra]

В России тоже самое происходит. Работаю машинистом экскаватора точно такие же условия ремонта

[@azouzzouaoui9281]

السلام عليكم ورحمة الله تعالي و بركاته

[@johnnysixter2356]

26:55 On voit qu'ils respectent bien le couple de serrage préconisé par le constructeur. :D Excellent !

[@jean-michelaltruy7637]

super mécano !!

[@CaptHollister]

Sans parler de leur respect pour l'environnement.