Restoration the Miter Saw I bought for $10

[@bharatdahya776]

Blade guard is essential. Put it on even if it looks dull as it could save you from serious injury.

[@daverice2426]

No kidding. I'm not a stickler; don't use a guard on my table saw for example, but it's too easy to see in my mind's eye how horribly south running a chop saw with no guard could easily go.

[@danmidkiff5416]

All of these restoration videos look like the items get dunked in the same mud hole.

[@matthiku]

Well observed! Sadly, it's part of the show nowadays in order to get more hits!

[@doodlecaboodle9298]

Yyyyup

[@creambeast8178]

It's not impossible tho

[@tessareeve6205]

They could also be recoveries from tsunamis

[@shaunmckay8550]

Are you using laundry detergent to clean them? I didn't recognize the blue bag

[@DrNumanG]

no music no trash talking no begging for anything just a perfect restoration!

[@gdiaz8827]

Wouldn't mind some audio or textual commentary

[@peterrowlands6406]

I'm always impressed at the time they spend making these things look old.

[@johnemmett2969]

Brilliant, by far the best video of professional repair work, without the ego bits. Great stuff…thank you.

[@RestorationVS]

Thank you for your interest in my work 🙏🏻❤️

[@KaquolMeliReno]

I love when people take old stuff and make it like new again!

[@RestorationVS]

Thanks for liking my video 🙏🏻❤️

[@keithimel2007]

Happy to see the armature and worm gear still available. I always end up with critical parts shortages.

[@HelloKevinWhite]

How is this even possible? Superb work! Right down to even naming your layers in Illustrator. You win, Restoration VS!

[@peterf5589]

You missed putting the clear plastic guard back on to stop any user from touching the spinning blade as the saw rises up, probably one of the most important safety guards!

[@ambsquared]

My thought too. Great for losing fingers or more. Why even put the guard mechanism back on if not using the guard itself.

[@esorth]

Looks like the original guard was pretty broken. But I would not personally be willing to run the saw with a blade installed without getting and installing a replacement guard.

[@richardcasey7521]

I didn’t see him grease the drive gears. Should he have or maybe it wasn’t video’d.

[@rsharahme3418]

That was broken and new was not available.

[@ChazzC]

@@richardcasey7521 29:46 - 29:52

[@alfredofigari3656]

Genial. Excelente. Muchas gracias. Saludos desde Paraguay

[@awaitingthetrumpetcall4529]

This is an expert rebuild technician. You can tell he has a lot of experience.

[@billykulim5202]

i dont thinks he should use penetrating oils for carbon brush plastic housing, penetrations oils are for metal screw

[@psilver063]

That saw could have been cleaned up without all that drama 🤣. Such stupid fools in this world! Look how clean it came with some soap and water, acting like he did something spectacular

[@magaliichazo4519]

Uuuuuuahhh increible ...no puedo creerclo que veo ....esa herramienta aca en Ecuador cuesta $400...y aqui solo le costo un bello tiempo en restaurarla y gratis ..que maravilla ....la pondra en venta ???😆😢😢😃😃😃hoy 2023.felicidades..

[@RestorationVS]

Thanks for liking my video ❤️

[@johnasendorf8409]

really good work... and I know finding a replacement for that broken guard is probably about impossible... but it's really a must

[@mattsanchez4893]

I cannot say enough about your ability to put the most complex gadgets back together again!!

[@billykulim5202]

how do he remember how to put together those screw and stuff, are he playback the recording video or he write it all down

[@MaxwellDiasfeliciano]

Fico novamente novo, uma ótima restauração hein?

[@GaryT1952]

Beautifully done...can't even imagine the number of hours you had into that project

[@RestorationVS]

Thanks ❤️❤️

[@chrisatkins7959]

34 minutes 53 seconds. He is fast lol.

[@gavinhill4121]

As far as I could see, it just needed a clean and the guard fixing. You cleaned it - nice job.

[@RestorationVS]

Thanks 🙏 ❤️

[@ZeidGho]

Not having any heavy tools like the other channels, yet producing a better result is beyond amazing 10/10

[@RestorationVS]

Thanks 🙏🏻😊

[@pattijareo7423]

I like that this was done with relatively basic tools! No 3D printer or laser etcher, lots of ingenuity and elbow grease. It didn't seem fake to me (I admit I am no expert) the amount of grease and rust seemed realistic. I'm sure there were things omitted, but I enjoyed it!

[@RestorationVS]

Thanks for watching my video 🙏🏻❤️

[@ChrisDart4232]

Great restoration. Probably misunderstanding something but the blade guard does not seem to be nearly big enough!

[@shadyone6620]

On the "before" shots you can see bigger plastic cover that was on the metal blade guard. Seems like he didn't found replacement.

[@barbannco]

I love to see these restorations....amazing...we are such a "throw away" civilisation

[@RestorationVS]

Thanks for liking my video ❤️🙏🏻

[@Backyard_Racing]

Write subscribe in the dirt while you’re cleaning up people will love it. Love from America brother!!

[@joerosado86]

Great restoration buddy, just seeing how many different parts on that miter saw, then putting it back together gave me a headache Thank you

[@lalitmjoshi3407]

Awesome and brilliant restoration. Almost out of factory product. Many many congratulations.

[@RestorationVS]

Thank ❤️

[@Seemsayin]

You are a true fixer of things. Shame there was no replacement for the shield. However... also knowing how to recreate the decals, from scratch, is another world entirely. Graphics, as well as mechanically inclined? Damn... You're good.

[@natureboygolfer]

The decals were what got me too Seemsayin

[@Seemsayin]

@@natureboygolfer I really had to give him a big nod. For most... it's one or the other. He's got both.

[@user-iy1do4gv9i]

​@@Seemsayinبيبي👏ثثصصصضصضضضض

[@mdtcomm1533]

This is becoming a lost art. Thank you!

[@8bitkid408]

I love these restoration videos. So engrossing with the sound off, I can binge watch for hours. Thank you for making these excellent videos.

[@RestorationVS]

Thanks for watching my video 🙏🏻❤️❤️

[@miguesalvadortrani3047]

Excelente trabajo, quedó como recién salida de la fábrica, felicitaciones por rescatar y darle vida a esas máquinas. Saludos desde Argentina.

[@RestorationVS]

Gracias por darle me gusta a mi video 🇦🇷 ❤️🙏🏻

[@woodensurfer]

I wanted to see how you fixed the transparent broken guard.

[@justomedel6633]

Pura mula

[@fishoconnor108]

I love it, tear down and muck ooooh. Best part of any job for me is getting the grime and grease cleaned up after the tear down. Also excellent restoration through out.

[@RestorationVS]

Thanks for watching my video 🙏🏻❤️

[@paulkelly1702]

I give you an A+ for the restoration and the editing. Resurrecting a tool from the dead and editing not boring or repetitive. Subscribed.

[@RestorationVS]

Thanks for liking my video 🙏🏻❤️

[@JacobThibodaux-p1p]

Seems like a lot of work for something u can go buy new for about $100 bucks

[@OswaldOstfalen]

​@@JacobThibodaux-p1p And that is exactly the problem of our times..

[@hassanodeh8451]

اصلاح محترف جداً Very professional repair. 🌹 🌹 🌹 🌹

[@RestorationVS]

Thanks 🙏 ❤️

[@desmondhume8815]

Отличная работа!

[@mightymarf265]

I always love to watch restoration videos. It's such an art to bring back to life the machines and tools that our countries were built with. Regrettably, the background noises in this one were too distracting for me. Had to play it on mute.

[@RestorationVS]

Thank you for liking my video and please forgive the noise in my video 🙏❤️

[@mightymarf265]

@RestorationVS LOL! Of course, I forgive you that! If I have difficulty with the background noise in future videos, I will put on mute again. But I will still watch them! 😉

[@21thTek]

MAn you aren an expert, nice meeting you !!👍

[@mmztimelord]

Excellent restoration! - One thing to remember and not shown is "Alignment" of the tool. Making sure the angle stops are set to true vertical 90°, Miter center 90° and 45° either side. Also, the back fence must be aligned 90° to the blade. Otherwise your tool will build in progressive errors in your woodworking project.

[@rockybosarge]

I really enjoyed the restoration of the mitre saw. I couldn't pull it off but you did a great job. Thanks for sharing.

[@RestorationVS]

Thank you for watching this video ❤️🙏🏻

[@jaysgood10]

Here is another restoration video of a piece of equipment that looks like it might have been plucked from the watery grave of the Titanic.

[@glenlongstreet7]

I fix tools. I have for decades. I am very impressed.

[@RestorationVS]

Thanks ❤️

[@Mr_Hed]

Хорош , красиво восстановил !

[@gonzochick360]

The only thing more miraculous than the job you did cleaning that saw up, was you putting it back together.

[@bigreeseify]

Pleasantly surprised... it's difficult to watch restoration after my mechanics.. that guy is amazing... but excellent job bro..

[@RestorationVS]

Thanks :)

[@juanislassolis2097]

muy buen trabaj0 graciasx compartir bendiciones maestro

[@RestorationVS]

Thanks for watching my video

[@gregariouswoodworks1270]

awesome restoration..be careful with the missing blade gaurd

[@alocin110]

I liked your video. Nice restoration as brand new machine. Thanks for sharing.

[@RestorationVS]

Thank you too 🙏🏻❤️

[@MrPatdeeee]

Incredible and awesome. Few could EVER do as half as you have. Thank for sharing a Gem to us.

[@RestorationVS]

Thanks 🙏

[@victorhugogonzaleznavarro626]

Please: DO TAKE A BOW!!! You've done a SUPERB job!!! Thank You so much for this video!!! MAY THE GOOD LORD BLESS YOU ALWAYS!!! 🛐🛐🛐🙏🙏

[@darkyatl]

nice restoration, but omitting the plexiglass safety precautions is an absolute no go...

[@jasonhobson-b4y]

Awesome work! I probably would have brushed it with a soft brush and hit it with blasted compressed air first, but it wasn’t really necessary!

[@joshlayonworks]

Oba dip in detergent 😂😂😂😂😂😂

[@TheMutanttomato]

Wonderful, wonderful restoration! Well done to you sir! Oh and, you restored a mitre saw from my home country, Malaysia! 😁

[@RestorationVS]

Thanks for liking my video 🙏❤️

[@131dyana]

Never thought that would ever work again. Amazing.

[@RestorationVS]

Thanks 🙏🏻❤️

[@abdullahk0405]

I liked your video but you need to do something about the screeching background sounds :)

[@tingle2958]

Homie is working within his means. I think the background noise gives it character :)

[@craigdonnell-sb3qp]

Turn the volume down if it bothers you so much

[@dinoschiesaro2549]

​@@craigdonnell-sb3qp in

[@themusicman-ij7op]

Those are happy birds 🐦‍⬛🦜🦉🪿🐥

[@КиРПОЗ]

Просто загляденье! AMAZING !!!

[@RestorationVS]

Thanks 🙏🏻❤️

[@fredflintstone505]

Looked awesome. The only thing missing was the blade guard. The original looked to be broken.

[@RestorationVS]

Thanks ❤️🙏🏻

[@JeremyNaus]

Nice restoration. Do you plan to add the sawblade guard again? I just get goosebumps watching the 'naked' blade go round when it's in the up position. Otherwise well done 🙂

[@nacekozo]

I was going to say the same!

[@markos6828]

Same as that!!

[@derekadams729]

Good job. Everything replaced that needed to be replaced.

[@RestorationVS]

Thanks 🙏 ❤️

[@gomezadams9900]

You forgot to replace part of the blade guard during the rebuild. As it is at the present time there is no protection to prevent serious injury if your hand comes anywhere near the blade while is still spinning down. It would also be nice if this model had a blade brake when you release the trigger.

[@Smeetheking]

I have seen someone cut half their hand off because they decided to remove the guard. I hope if this saw is being used that it gets a proper guard replacement.

[@redrufus444]

It is useable now! Good Restore!

[@RestorationVS]

Thanks 🙏

[@richardthompson7600]

Excellent restoration, it's 10 out of 10 from me. I'd be able to take it apart but putting it back together-no chance. Keep up the good work.

[@ldemiguelrodrigo3204]

Estupendo trabajo. espectacular. Felicidades.

[@CwazyWabbits]

Looks great, however you have replaced the original negative rake blade with a positive rake blade. You should really only use negative rake blades on chop saws as a positive rake can pull the wood up off the deck and result in a jam or worse. Positive rake blades are for table saws and circular saws.

[@saladiva]

It always amazes me how these guys know exactly where all the nuts, bolts and screws came from. They must have a photographic memory. Nice work BTW.

[@carmium]

That or they'v fixed so many things it just seems "obvious"!

[@irtheLeGiOn]

They are recording it.

[@mykstreja8648]

More like videographic memory -- as in the SD cards in his camera. Plus, he's probably using a compartmented container, like a tackle box or an egg carton to keep the little parts sorted out.

[@seadog158]

Wouldn’t it be great if someone filmed it all for him?

[@claudiacarvalho3426]

Trabalho perfeito. Parece até que saiu da loja hoje.😊

[@masamitsukoshio380]

It's a thorough job, and it's nice to see. thank you for the wonderful video

[@RestorationVS]

Thanks for liking my video 🙏🏻❤️

[@anonamoose3530]

How do you make those amazing stickers?! Perfect touch to the saw. Looked better than factory. What printer and sheets do you use?

[@donparker1823]

Fun to see the transformation on this. Nice work!

[@RestorationVS]

Thanks​ ❤️🙏🏻

[@darrelldillon5658]

Very fine work, I would be proud to own a tool rebuilt by you. Your family must be well taken care of an extremely proud of your skills.

[@RestorationVS]

Thank you very much 🙏🏻❤️

[@scottprater-f3l]

Wow.. I wish I could learn how to do stuff like this

[@RestorationVS]

I'm really glad you enjoyed this job​ ❤️

[@igorigor4925]

Покажите хоть раз первую часть видео, ну где Вы берете нормальную рабочую пилу и доводите её до состояния в котором она на начале этого видео. 🤣

[@Marik-180]

да нуу, наверное опять в кустах нашли, или на дереве XD

[@DennisFreitas-bn7nh]

Nice 🙌👍

[@RestorationVS]

Thanks 🙏🏻

[@TheMsCrystalblue]

Wow! Fantastic restoration! I kept thinking how my Dad would have loved to meet you. He loved fixing old tools and did a bit of imaginative repurposing of some. Thanks for the video and the reminder of my Dad.😊

[@RestorationVS]

Thanks for liking my video 🙏❤️

[@bobcontreras5638]

Nicely done, good work.👍. It came out beautiful.

[@RestorationVS]

Thank you so much 🙏❤️

[@robertobezerra8376]

Trabalho lindo parabéns 👏👏👏👏💯👍👍🇧🇷

[@RestorationVS]

Thanks 🙏 ❤️ 🇧🇷❤️

[@lotharfunke8749]

Great show knew you gonna pick up that drill press. I have the same saw s all has to be 35+ years

[@CogentConsult]

Wow! Really nice work! However, because you left off the clear plastic blade guard, using this tool without that guard is now incredibly dangerous. You need to make a new clear plastic blade guard before using this tool. I’ve taken verbatim testimony from far too many people who cut off their fingers because they removed that clear plastic blade guard because they thought it was a hindrance or unnecessary, and nothing could be further from the truth. Keep up the good work! And make a new blade guard!

[@Emreozann]

Power full nice work thanks

[@RestorationVS]

Thank you too 🙏🏻❤️

[@taunteratwill1787]

No safety guard to speak of, rather dangerous device! 😎

[@phillipwarner4498]

Nice pace on your video, not too fast, not too slow. Also, I'm very intrigued by the background sounds! And, of course, outstanding work.

[@RestorationVS]

Thanks for liking my video

[@jianwangnj]

Good example for how miter saw works.

[@luisangelcampos1681]

You lacked the disc protector, otherwise excellent.

[@jasdog71]

Good job, but agree the disc protector is necessary, not to protect the blade but to protect the user from the blade!

[@silaskelly604]

I have been kinda proud of my sweaty feet. Four hours walking around in tennis shoes and water would be sloshing over the tops. . . . . But I do believe your hands have taken it to a whole new level! Really enjoyed watching your restoration. Thanks.

[@RestorationVS]

Thanks for watching my video 🙏🏻❤️

[@jrremodelandrestore7918]

Please order the plastic guard and install it.

[@peterlafayette5595]

Your very talented, interesting to watch. Keep em coming.

[@RestorationVS]

Thank you very much 🙏🏻❤️

[@jamescraig5421]

One hell of a great restoration Bro. You just keep up the great work you are doing.👏🏻👌👌👌

[@mukundmolekule]

You are a very good professional to rebuild the saw i liked your skill

[@RestorationVS]

Thanks for liking my video​​ 🙏🏻❤️❤️

[@pazzy4501]

All is fine except the protective blade clear plastic, you should have made a new one, this is soooo dangerous

[@josepcb2882]

.. si no lo veo, no lo creo. Felicidades. Saludos desde Barcelona Catalonia

[@frankbiz]

Amazing work! I'm sure it took many many hours to do this. Incredible! 👍🏻

[@RestorationVS]

Thanks for watching my video

[@Sam-rm8sr]

I would have NO clue how to put all of ut back togethor again after pulling it out 😭 your so smart and have awesome skill and awesome videos, thank you for posting these videos!

[@Sleepy2368]

I came to the decision during the disassembly that this is a project I would probably never want to take on myself 😂 Great work sir, as always. It's a great pleasure to watch your videos!

[@IfDawidCanYouCan]

What a perfect transformation.... Brilliant....

[@RestorationVS]

Thanks for liking my video 🙏🏻❤️

[@francoispaulin8469]

C'est formidable mais c'est dommage de ne pas avoir pu réparer la protection en plastique qui était cassée mais aurait pu être restaurée au minimum pour assurer la protection de la lame de cet appareil qui sans cela est extrêmement dangereux.

[@josecepeda1463]

Ver restoration es aprender mucho más buen video 💯💯💯💯💯💯💯💯

[@RestorationVS]

Gracias por darle me gusta a mi video 🙏🏻😍

[@agwbcfjc2]

A great deal of skill and knowledge, and the video itself is near to perfection! Excellent job, sir! New subscriber!

[@RestorationVS]

Thanks and welcome 🙏🏻❤️

[@t3chninja_official]

That's a fake account if I've ever seen one.

[@breadmenv]

@@t3chninja_official exactly, no one in their right mind would pay any amount of money for that turd of a saw. Even someone who could “restore” it.

[@vladmirfreitasviana]

Boa tarde companheiro Estou vendo e aprendendo, a sua capacidade como profissional, parabéns

[@RestorationVS]

Obrigado por gostar do meu vídeo 🙏🏻

[@windmillacres679]

I'm probably wrong. I honestly know very little about the electric service in countries outside of the USA. But. To me, it looked like the original plug was for a 110v service, and the final was for a 220v service? Where am I wrong? Someone please educate me. Thank you.

[@windmillacres679]

@phi katho I understand that. I am fairly sure the final plug used 220v. But doesn't the first plug look like a US 110v ac plug?

[@pravo57]

Отличный ремонт.

[@RestorationVS]

Thanks 🙏 ❤️❤️

[@POOKIE5592]

That should've been free, not $10.

[@Ànyel-x9h]

Perfecta trabajo muy profesional

[@RestorationVS]

Muchas gracias

[@benw4401]

Buys garage sale miter saw, dunks it in mud water, pretends to restore it. Cool.

[@jasonbubb1275]

The gears were toast. And the blade was locked up. I'd say thats a restoration.