Restore your frame for under $50

[@Metal_Massacre_Fab_Shop]

sweetpatina.bigcartel.com/product/black-out-rust-preventative-coating use code MMFS64 to get 5% off your order 👊🏻

[@lesliejones2740]

❤

[@asmongoldsmouth9839]

Why does no one acid-bath a rusty frame anymore? Or at least spray it down with Evapo-Rust after using the wire wheel? The rust WILL return. The sealant everyone uses, just blocks the moisture into the metal.

[@samuelthomas9758]

$50 if you already have the equipment and tools and the skills to do it.

[@Metal_Massacre_Fab_Shop]

👍🏻👍🏻

[@samuelthomas9758]

@@Random-ed2xf This is yt shorts buddy

[@ClausRust]

the the pqr-50 they used is $75 a can and that looks like a couple cans worth of it

[@MrOiram46]

Imagine the investment you’d have to cough up to gain the knowledge and experience tearing down cars down to the frame

[@robertbenjamin1513]

Mastercoat is better for a similar price point

[@mystupidopinion697]

Pluse countless $$$$$ replacing all the broken crap when you disassemble the entire vehicle!!!

[@Metal_Massacre_Fab_Shop]

Didn’t say restore your vehicle for that price. That’s how much the can of paint cost. 👍🏻👍🏻

[@samwhite1345]

Call it preventative maintenance and your savings thousands in towing bills 😂

[@BattleOfBowties]

😂 the paint is like $50 that's about it! Good job!

[@McCarthyism_by_Youtube]

50 if you buy them by the case using your tax id 😅

[@89smokeshow]

I also heat the frame up to get moisture out before I spray it. Looks good 👍

[@Metal_Massacre_Fab_Shop]

Nic I’ll have time try that

[@GenX_-um2ct]

I got it down to shiny metal with my pressure washer and a hydroblasting with sand. I did buy the pressure washer. But that is useful. Material and sand about 100 bucks. Then rattle canned it with self etching primer and black spray paint. Looks beautiful

[@Metal_Massacre_Fab_Shop]

👊🏻

[@JoseMartinez-of5rb]

3 obs trucks took em all apart sand , painted and put em right back together. Yea it’s a process but respect what god given you and it will respect you right back. Great mentality is what I see 👍🏽

[@Metal_Massacre_Fab_Shop]

Thanks 👊🏻

[@dc6233]

50$, I'd spend 10X that in replacing bolts, bushings and body mounts just getting it back together. If that stuff works like POR15 for 50$, that's crazy cheap, I do like my POR though...

[@Metal_Massacre_Fab_Shop]

I’ve never used the POR 15 but I’m very happy with the finish of this stuff

[@theamaturepro]

I agree. It's always the bolts and hardware that blow the budget for me the most. I've never found an undercoating that lasts over rusty metal no matter how much I prep it. Mostly just a lack of knowledge on my part

[@MccormickAutos]

So realistically its not under $50. The product itself is $55 for the smallest can, you need the tools, then you also gotta know how long it’s going to take, wether you’re taking the frame off or keeping it on

[@Metal_Massacre_Fab_Shop]

This video is over a year old. When the product first came out it was under $50. 👍🏻👍🏻

[@sosayweall1952]

I wouldn't bother wire wheeling it. Id just use a needle gun to get rid of the rust scale, treat it with rust remover wash it then paint. The needle gun leaves a better profile for paint to stick to anyhow.

[@KekeeBlack]

There is no way I'd take apart my whole truck and do all that prep work just to slap on some $50 paint. I don't see an advantage to this over a simple oil coat every year unless it's a show truck.

[@Metal_Massacre_Fab_Shop]

I guarantee this will look just as good or better than the “expensive” paint you would use 👍🏻

[@nathan7627]

the reason u would do this is if you were doing a body off frame restoration on an old vehicle.

[@connor4961]

Down here in the south we just spray rust oleum on there and let it ride.

[@jaydu2970]

@@connor4961does the rust go through?

[@connor4961]

@@jaydu2970 I don’t know what you mean.

[@Shadows-RC]

Wouldn't some sort of zinc primer then POR-15 be a better protective coating after stripping the rust off? Then, after it all cured, spray the heck out of everything with black Fluid Film or PB Blaster's Surface Shield. If a show truck...then no oil spray.

[@Metal_Massacre_Fab_Shop]

This is a comparable product to POR-15. It has a rust converter built in. Pretty good stuff

[@Shadows-RC]

@Metal_Massacre_Fab_Shop Ah. A rust converter in it. Nice. I forgot about the rust converter. Good to get all remaining specks the wire wheels can miss.

[@BeardedKayakFishing]

Under $50 but don't include the time, tools and means to strip down to your frame😂

[@Alex-vz2jz]

What you charge yourself?

[@Switchh8]

If it stops and prevents rust after yall sanded idk what the big deal is on people. Sometimes the old saying is true "you get what you pay for" but you are doing your own work and fixing it yourself and if it has the same ingredients or similar properties to other things and it works then whats wrong with it? Better than not doing anything at all. Good work 👍

[@Metal_Massacre_Fab_Shop]

That’s what the product is designed to do. Thanks for watching 👊🏻

[@209chevymon]

Thats my thinkin too bro i with you on that 1

[@treasurethetime2463]

I never buy a truck with a painted frame. I know. I know. The intentions my be pure by the owner. Proactive. Preventative. I just assume the worst.

[@andyl9920]

Wanna do mine? Ill pay u $50

[@Metal_Massacre_Fab_Shop]

Sounds good 👍🏻

[@davids3487]

Good One😂😅

[@imonaroll9502]

After you paint it, you’re supposed to add a wax coating which is hard to find and lasts only 10years and must be removed and reapplied. ❤

[@Metal_Massacre_Fab_Shop]

Hmmm never heard of that

[@imonaroll9502]

@@Metal_Massacre_Fab_Shop if you can find a good paint shop they will carry it. GM has done it for years. If you’re going to grind it down to bare metal paint only will chip and rust instantly, but the wax coating on top of the paint will protect it even more with weathering and stone chips and dirt.

[@ffx95]

“Only 10 years” acting like that’s not amazingly long lasting.

[@imonaroll9502]

@@ffx95 10 years of daily use. Doesn’t apply to trailer Queens and Garaged cars. So will hold up for 40-50 years easy.

[@Tech-28]

Restore your frame for under $50 and 240 man hours of descaling, grinding and sanding 😆 looks good tho 👌

[@Metal_Massacre_Fab_Shop]

👊🏻👍🏻

[@Sperez-ue2lu]

What kind of wheel are you using to grind with

[@Metal_Massacre_Fab_Shop]

It was a scotchbrite wheel.

[@LegoRx7]

On average, how long does it take to dry? Restoring an '02 Lightning.

[@Metal_Massacre_Fab_Shop]

Not sure on the exact time. But it was pretty good after a day of sitting

[@calvins8234]

What is that stuff called that you got for the frame

[@Metal_Massacre_Fab_Shop]

It’s sweet patina black out paint. I have the link to it in the pinned comment 👍🏻

[@Harrythesquatter]

Doing gods work 🤙

[@Metal_Massacre_Fab_Shop]

👊🏻🤘🏻

[@jwalkerXx]

Not a single drop cloth, thats whats up.

[@Waterbirdbob]

I need this

[@Metal_Massacre_Fab_Shop]

Yes you do. Use code MMFS64 for a discount 👊🏻

[@anthonymiller7992]

Did you all get all that info? The most detailed restoration video seen yet! I spent a lot of time rewinding so I can take good notes. I'm ready to restore my frame!!! 😂😂😂😂😂 Just for the record, I was kidding. I assume they are advertising something???

[@Metal_Massacre_Fab_Shop]

Hard to get to many details in a one minute video. It’s more of a teaser for the full video 👍🏻

[@anthonymiller7992]

@Metal_Massacre_Fab_Shop kinda figured it was something along those lines, Couldn't help but have fun with it though LOL

[@grubby1975]

I hate when a wheel sheds wires! 😅

[@Metal_Massacre_Fab_Shop]

😂😂😂

[@edwardzint]

Where did you get the paint bro

[@Metal_Massacre_Fab_Shop]

Sweet patina sells it. sweetpatina.bigcartel.com/product/black-out-rust-preventative-coating

[@madmanmapper]

$50 to paint your frame. Assuming your frame is solid enough to use.

[@DIXIEMAFIA251]

Looks badass! U just earned a new subscriber!

[@Metal_Massacre_Fab_Shop]

Thanks and appreciate it 👊🏻

[@martingatavaski1351]

+$200 in grinding Discs, Wire wheels/ brushes, Acetone, paint brushes, maske, gloves, etc, etc..

[@Metal_Massacre_Fab_Shop]

👍👍

[@critical]

Tools, workshop, clothes, underwear,.. lol you can keep that going 😂 sidetracking

[@TheRitchieLeeShow]

Next time he’ll be wearing his Kevlar.

[@eusebiegherman8225]

one bolt eh? kool

[@johnspartan3405]

Sure. I give you 50 bucks. Make it happen.

[@Metal_Massacre_Fab_Shop]

Sounds like a plan

[@CarbonRevo91]

Can you get it in an actual factory color aka matte or flat black rather than gloss black?

[@Metal_Massacre_Fab_Shop]

Black only. But a top coat can be applied 👊🏻

[@TheDan0131]

POR15 for me thanks

[@fff-cf4fx]

What blows my mind is people 1-still brush on por-15. Instead of spraying. Hot mess looking. 2 now, use a product from a tiny new company without years of feedback....with a brush. I guess cause he sponsirs a lit of people on here. But Wtf. Get a cheap spray gun and spray stuff with a hardener on a frame. All that work.and then brush on paint.

[@Metal_Massacre_Fab_Shop]

What blows my mind is the finish this leaves when you brush it. I know it won’t change your mind and im good with that. But I would be willing to bet you would think the finished product is sprayed when it dries

[@fff-cf4fx]

Ok with that endorsement i almost hAve to buy the stuff to see. On the to.do list now lol.

[@Metal_Massacre_Fab_Shop]

@fff-cf4fx lol I think you will be pretty happy with the results

[@Metal_Massacre_Fab_Shop]

@fff-cf4fx I’ll try to snag a video of the frame now that it’s done 👊🏻

[@rexrexrex992]

It’s self leveling. No need to spray.

[@LordLorenzo834]

$50 .. Rolls wheels away from a metal carcass 😂

[@stephengibson3944]

Where do I get it the rust paint that is

[@Metal_Massacre_Fab_Shop]

sweetpatina.bigcartel.com/product/black-out-rust-preventative-coating use code MMFS64 for 5% off 👊🏻

[@RJ-is9ko]

Cost you in time $$$ instead

[@tedburkholder8156]

How many quarts would I need to do a truck frame?

[@Metal_Massacre_Fab_Shop]

I did this one with a single can I purchased a second for suspension parts and rear and still have a good bit left over

[@darleneprovence9493]

Nice job👏👏👏👏👏

[@Metal_Massacre_Fab_Shop]

Thanks

[@Tannerrebuilds]

I have no way to take my car off its frame

[@Metal_Massacre_Fab_Shop]

Judging by the profile pic. Looks like you have a unibody mustang. 👊🏻🤘🏻

[@luizfilipe4544]

Yeah $50 dollars and 1 month of free time

[@Metal_Massacre_Fab_Shop]

👍🏻👍🏻

[@michaelwoods3850]

This will rot ur frame

[@Metal_Massacre_Fab_Shop]

You have experience of this happening?

[@michaelwoods3850]

@Metal_Massacre_Fab_Shop no, I was researching on getting it done and experts said to not coat it. The coating traps in rust and moisture rotting it faster. I chose to oil it

[@user-ii3hj6ih5z]

Como se llama el aceite q le ponen

[@Metal_Massacre_Fab_Shop]

Sweet patina black out paint

[@bandittelevision]

Those 1 gallon cans are more than 50 bucks

[@Metal_Massacre_Fab_Shop]

This isn’t one gallon. But the price has went up. Since this was over a year ago 👍🏻

[@justinhoffman5726]

So you charge $50? Can I make an appointment

[@Metal_Massacre_Fab_Shop]

Sure thing. But you will still probably try to get it for 45 🤣👍🏻

[@incognito8p298]

Can you paint over what ever that black stuff is?

[@Metal_Massacre_Fab_Shop]

Yes you can. It leaves a pretty sweet finish by itself though

[@incognito8p298]

I simply have plans for a bright red chassis. That's all, I actually didn't realize that was paint. I'm going to be filling my pits and everything my frame will be showing on my build in places so I'll be needing a show finish

[@Metal_Massacre_Fab_Shop]

@incognito8p298 I got ya. This would be a good base coat. It’ll help stop any rust also 👊🏻

[@mblake0420]

​@@incognito8p298lol red frames are gross

[@mblake0420]

​@@incognito8p298red frames are gross

[@bradenkylegreen]

I need to do this to my dodge!!!

[@Metal_Massacre_Fab_Shop]

It’s really nice. Crazy you can brush it on and have such a nice finish

[@laszloszell8753]

Put coat at rust. 😂

[@Metal_Massacre_Fab_Shop]

What lol

[@laszloszell8753]

@@Metal_Massacre_Fab_Shop sarcastic:P

[@Halfdaf]

Thats not even rusty.. where the hell you from, California?... thinking THIS is rust, lol

[@Metal_Massacre_Fab_Shop]

Didnt know I said it was really rusty. Thanks for clearing that up though 👍🏻👍🏻

[@johnh3641]

What kind of buffer is that? I need a wire brush attachment.

[@Metal_Massacre_Fab_Shop]

The pad is just a scotch bright pad I bought off Amazon

[@mondo9.2.5]

get spray guns harbor freight

[@SighsInternally]

and thousands in labor costs

[@Metal_Massacre_Fab_Shop]

👍🏻👍🏻

[@Jaythesparrow]

It says how to restore your frame for under $50, not the whole fucking car 😂 just gotta be willing to put the hours in. People be lazy and bitching..

[@Metal_Massacre_Fab_Shop]

Welcome to the internet. Where everyone is an expert lol always fun

[@theballintruth3369]

First step, have a lift

[@Metal_Massacre_Fab_Shop]

Or 4 jack stands 👍🏻👍🏻

[@chadrose]

Nah 70$ with shipping 😂😂😂

[@Metal_Massacre_Fab_Shop]

Thanks for checking 👍🏻

[@chadrose]

@@Metal_Massacre_Fab_Shop of course

[@nathanwebb4253]

C10 frame?

[@Metal_Massacre_Fab_Shop]

66 gmc

[@twistedpixel2558]

To hell with a wire wheel. If I'm taking it down to bare frame I'm gonna media blast and spray it.

[@Metal_Massacre_Fab_Shop]

Keep building superior cars 👊🏻🤘🏻

[@radiospank]

Yea this is what you pay body shops to “restore” and they do this half ass job 😊

[@Metal_Massacre_Fab_Shop]

lol if you say so man 👊🏻

[@thomasseliger2982]

should be called how to waste 50 dollars.

[@Metal_Massacre_Fab_Shop]

How was it wasted exactly?

[@philsketball]

Come do mine for $50

[@Metal_Massacre_Fab_Shop]

👍🏻👍🏻

[@dc6233]

@@Metal_Massacre_Fab_Shop "Sweet Patina"?? It can't be as good as POR15 for that price, heck, that's even less than a 60$ gallon of Rustoleum!!

[@Metal_Massacre_Fab_Shop]

@@dc6233 it’s a great product. But I’m not here to sell it to you lol. Just saying it worked great for me 👍🏻👍🏻

[@Metal_Massacre_Fab_Shop]

Check out the full video here kzbin.info/www/bejne/iJzcoH56ftmAo6M

[@ASSOOOJACK]

50 bucks lmao who tf are you lying to

[@Metal_Massacre_Fab_Shop]

Well no one lol. The can of paint I used was $50 dollars at the time of making this video. Sorry for the confusion.

[@ASSOOOJACK]

@@Metal_Massacre_Fab_Shop understandable have a good day

[@Fkn_Sendit365]

Restore throw that away that's a hazard on the road is all

[@Metal_Massacre_Fab_Shop]

Lol cool 👍🏻👍🏻

[@every__villian_is_lemons]

Under $50

[@Metal_Massacre_Fab_Shop]

The paint is 49. Sorry if that's misleading

[@every__villian_is_lemons]

@@Metal_Massacre_Fab_Shop nah I was just factoring in the tools, shop rental, labor hours, cost and effort to separate the frame etc... more like 50k

[@gt3jacoby]

@@every__villian_is_lemons not even close to 50k lmao, paying someone to do this would be in the ballpark of 6-7k at most

[@every__villian_is_lemons]

@@gt3jacoby damn sure not under $50

[@Metal_Massacre_Fab_Shop]

Haha guys it’s meant to be 50 for the paint. I had most of the stuff laying around to do it. Consumables can be bought on the cheap 👍🏻