Ram headlights - OEM vs Replica?

[@triple_threat_lightz]

I always prefer to use OEM assemblies than TYC or any other aftermarket when doing retrofits/halos/custom builds, always heard the housings are better on OEM thicker like you said and the lens better quality and will not get yellowing lenses in the future, but yes it will always come down to how your budget is.

[@horrorfan4711]

I wish they made an adapter kit to go from projector back to halogen. I have a serious moisture problem on my 2013 ram sport projector headlights

[@tymatheny3617]

I have a moisture in my passenger side headlight. Did you notice his comment about the vents on the OEM? If the cap is pressed too tightly it won't vent moisture properly. I am going to try that before replacing anything.

[@200nick2]

Purchased a pair of TYC Projectors for my 16 ram. Horrible quality problems. Within 1 month both units started to leak in water from the top and retain it in the bottom. Had to drill holes in the bottom of the clear plastic to keep water draining. The projector cutoff, while sharp, is badly cut. Both head lights are skewed up to the left side and down to the right side, also the cutoff is not perfectly straight. When properly aligned both headlight beams match on the left side but have about a 1 foot gap (Depending on distance) on the right side. I will be hunting down a pair of OEM Mopar headlights for my truck in hopes they are of higher quality. Incredibly dissatisfied with the TYCs.

[@_ThePsychoRaven]

The TYC headlights have the halogen bulb only, correct? I have a 2015 Ram 2500 with quad headlights and I would like to get these.

[@RetroShopLights]

Correct. We have these on our site as well - www.retroshop.us, and we have the adapters to mate these to your truck. Let me know if you have any questions!

[@joevan96cummins]

I have a 2010 Dodge Ram 3500 ST package...it has a single headlight bulb, it is a base model...2 quick questions...(1.) could I simply upgrade to a 2011-2012 quad headlight assembly plug and play with factory wiring, (2.) do you have a kit that will allow me to run OEM projector headlight assemblies? Thanks in advance, looks like you make some quality products. 👍🏼

[@deviantarsenal]

You can change your headlights to the quads without any adapter. Simply switch em, plug and play. If you want the OEM projector headlights, you'll have to buy the $135 adapter from The Retro Shop before installing the protectors.

[@Henroocho]

What does TYC stand for?

[@danav3387]

Hi, how do I tell which lights will fit and work on my '12 Ram 1500 4x4. Everyone I see on KZbin demonstrating and installing projector lights all they say "This will NOT work if you have factory projectors" just got the truck it has aftermarket projectors that are extremely terrible, so I need to upgrade but don't know which way to go. I'm not sure if it had factory projectors or plain reflectors.. Thanks I dont want to buy something that won't work for my truck.

[@RetroShopLights]

These will fit, using our adapters. Your 12 would not have come from the factory with OEM projectors (as those didn't hit the market until '13)

[@andrewsmallwood1858]

Any complaints about condensation inside TYCs? Seems like I’ve had the worst luck with this and cheap eBay headlights...which was why I opted for CAPA certified TYCs and their limited lifetime warranty.

[@RetroShopLights]

Not when the dust caps are installed correctly. All good!

[@andrewsmallwood1858]

Makes sense...I noticed my dust caps on my TYCs were a lot deeper and better quality than the ones off my cheap ebay set... Just curious, what are your thoughts on the dust caps with LED lights? Most LEDs now have built in huge fan on the back of them...what are your recommendations are far as dust caps with LED headlights?

[@RetroShopLights]

@@andrewsmallwood1858 no go........I wouldn't use an extended dust cap.

[@andrewsmallwood1858]

Do you think they’d be more likely to take on condensation without the dust caps installed with the LEDs?

[@RetroShopLights]

@@andrewsmallwood1858 an open hole in the back of the light? Yeah, they'll take on water big time then.

[@alittlebitofeverything5090]

Nice looking headlight. Will Putco Nite lux or similar led replacement bulbs fit in the TYC light socket space? They are tight on the oem headlights.

[@RetroShopLights]

The TYC and OEM are pretty close to each other in that regard, you may not see a difference in depth.

[@alittlebitofeverything5090]

RetroShopLights Thank you very much. Quick reply!

[@deviantarsenal]

Do the LED turn signals on the TYC's also become a white DRL in the daytime or would I have to have switchbacks installed?

[@RetroShopLights]

The TYCs are amber, if you wanted white - switchbacks would be required.

[@MrGustavosco]

@@RetroShopLights On the OEMs, does the turn signals turn white when not turning? Like a day light?

[@RetroShopLights]

@@MrGustavosco OEM lights are amber only for parking, turn and DRL (if the truck is equipped with DRL) We have options to make them white for parking / DRL, but turns will remain amber on that (switchback option). This would be a custom set of headlights that we can do for you.

[@Waskapmutni]

I would like to point out two things with these headlights. I do love these, I've had them for almost three years in my 2012 Ram 1500 laramie longhorn edition and I think they look so much better than stock - HOWEVER - when I recieved the lights, I discovered some marks in the chrome on the left headlight in the upper left corner. I looked at it and discovered that this was caused by the plastic pressing towards the chrome. Now while I did find this a bit annoying, I decided not to hassle with the return because I live in Sweden. HOWEVER - as time went on - the little scuffmark in the chrome just became longer and longer. If anyone is curious - let me know and I can send you a picture of what it looks like. I might even be able to find a picture of what it first looked like when I had just recieved the lights. I don't know if there have been other issues similar to this with these lights, but thought it was worth mentioning. The other thing is that - there is condensation buildup all along the amber turnsignals - but ONLY during rain. I've driven the truck through fog, snow and rain - and if it's raining - there will be condensation all along the turnsignal - but only limited to the section of the turnsignal - almost a line-like limit. It has been like this since installed. Again - I don't know if this was just with my headlights specifically or if others have had or have this problem. I'd never discourage anyone from getting these - especially not with the price-difference. I love them, I have a couple of months ago thrown in a HID-conversion for the projectors and had I known back then how amazing HID is and how much of a difference it makes, I would have gotten the HID-kit along with this - which I recommend anyone considering these lights to do.

[@alecwright6344]

Yeah I have the tyc headlights just like in the video. You guys know if there’s a way to change the cutoff line. I assume most cutoff lines should be pretty much horizontal. Well on these from left to right they go horizontal, then diagonally up and then horizontal again. Kinda feel like I can barely see the left side of the road.

[@RetroShopLights]

That step you are seeing is inherent to a projector's design. You can't "easily" modify that, nor would you truly want to, I'd start with checking your aim. They may be too low currently.

[@icu_corey_rn_903]

Do u know if the OEM headlights will work with the conversion harness sold by headlight revolution. Only asking because I feel like the OEM is going to hold up better against condensation and oxidizing because they always do it seems 😂

[@RetroShopLights]

Yes, though.......the adapters that Headlight Revolution has - we produce them and sell to them. Those can be purchased here - shop.retroshop.us/ProductDetails.asp?ProductCode=13%2EAdapt

[@changchung]

Thanks for share. which one is brighter in the turn signal light?

[@RetroShopLights]

OEM is slightly brighter.

[@changchung]

RetroShopLights thanks

[@hyperthreaders]

Are you hearing anyone complaining about yellowing on the TYC's? I don't see it on any of the OEM projectors I see in the wild but not sure about the TYC's.

[@RetroShopLights]

Few and far between, but yes - I have heard a few people mention that the clear coat isn't lasting as long on the TYC models.

[@jonathandelrosario5072]

change of another model of front lamp for ram 1500

[@gmoney8555]

Can the turn signal be replaced or fixed on these headlights?

[@RetroShopLights]

we have switchback boards to replace the OEMs, if your OEMs are damaged or not functioning.

[@armchairgangstac907]

Is it true that TYC produces the projectors for Ram? I’ve read that multiple times.

[@RetroShopLights]

you mean for the OEM units? No, no truth to that at all. Magna produces the OEMs.

[@thomasloughery3452]

Can I install a set of TYCs on a 2012 2500?

[@RetroShopLights]

yes, with our adapters - which are an option on the listing for the headlights.

[@thomasloughery3452]

@@RetroShopLights Xp0070?

[@RetroShopLights]

@@thomasloughery3452 yup!

[@thomasloughery3452]

@@RetroShopLights thank you

[@josehigareda8545]

Would this fit a 2015 lonestar

[@jeremymcfail9700]

Yes, any 4th Gen Ram, with our adapters.

[@sethfulton7011]

so you’d be better off getting the replica & putting in morimoto’s retro quik projector for a better-than-OEM projector for less money

[@RetroShopLights]

Yes, especially now! Years ago when we did this video - the cost difference on the TYC vs OEM was about $250......its WAY different now. OEMs have skyrocketed. TYC & Retrofit is the way to go!

[@ironman2362]

Do you have after market. Headlight that will be compatible with 2013 ram 2500 larmine. Diesel that already have the projector set up

[@RetroShopLights]

Yes, we always have them in stock, on our website - www.retroshop.us - TY!

[@djb201071]

MB’s”$

[@MFJones24]

Will these fit 2019 big horn?

[@jeremymcfail9700]

classic......yes.

[@MFJones24]

Jeremy McFail so not the all new?

[@RetroShopLights]

@@MFJones24 no, these are for 4th Gen trucks, not 5th Gens.....

[@mweezy]

Hi! I have a 2010 Ram Crew Cab and was wondering if those OEM or the After Market headlights will fit it. Thanks,

[@RetroShopLights]

Sure will, with the use of our projector adapters. We have them on our website, www.retroshop.us - TY!

[@mweezy]

RetroShopLights Thanks for the quick reply! I checked your site and couldn't find the same style of these headlights. I was able to find the adapters though...

[@RetroShopLights]

Replicas are on the main page (we have 6 of our most sold products on the front page of the site) - OEMs can be found on page 3 of the 13+ Ram section, or.....you can contact us via email for more info, or call us.

[@andiiramii2775]

what are the low beam bulb size on the TYC?

[@RetroShopLights]

TYCs take a 9012 bulb.