Revealing our supercharged Duramax swapped Chevy at the SEMA Show | BANKS BUILT Ep 43

[@bankspower]

Here's the plan! We're going to fire up the engine IN the truck and take it to some car shows. Then, after we've put a few miles on the truck, we'll pull the engine and put it in the dyno cell for evaluation and fine-tuning. You'll meet our calibrators, Jeff and Aaron, who will tune and prepare it for mass production.

[@kyleolin3566]

I cannot wait to hear that beast run. One of the coolest customs I have ever seen.

[@CloudHindlen]

@@kyleolin3566 ditto for me too. Lol

[@heythere6922]

Thank you Banks, thank you so much!

[@theblackbear211]

I'll be waiting to see all of that!

[@mrnobody8540]

You're the Man ! Enjoy your builds

[@eboutilier6]

Wow what an awesome build! The Whipple sticking out of the hood was just badass to see! Thanks for taking us all along for ride Banks Team!

[@bankspower]

Thank you for your support of the build and watching along the way. We love hearing from our fans! Stay tuned for more, season 2 is just around the corner.

[@timothymroberts2949]

Awesome work from Gale Banks and his team at Banks power! Super high five to Eric and his mad skills! What a journey this build is taken. Looking forward to seeing what's to come. Congrats to the Banks Crew!

[@blackbuttecruizr]

Thanks @GaleBanks for bringing us along for the ride!

[@iainlangley]

I've waited a long time to see this build finished, and it was well worth the wait. Banks have done a stellar job of this, It is stunning, the dedication and commitment has paid off! Thank you for allowing us to see the process and finished product. I looked forward to seeing what this beast can do! Also, it was cool to see Uncle Rich in this video too.

[@campingwithhomer7371]

I bow to Mr. Banks, the team members and all the suppliers of this build. The KZbin videos of this build have been a great pleasure to watch and seeing it at SEMA was icing on the cake. Congratulations to Banks Power!

[@jeffwooton7138]

So glad to hear this is going to be a production engine. Not real sure my wife is happy about it, since her '18 Chevy can receive the top end love. But, she'll be repaid in "smiles" per hour. Excellent job gentlemen. All of you. Now, let's see it SHRED!

[@samlack3334]

It's a bit of a shame that so much of the final build process was lost in the crunch. We spent ages going over every detail in depth but in the end everything was thrown together in one episode. I guess this is an unfortunate side effect of strict deadlines. That being said I have thoroughly enjoyed your build series and I'm grateful to the team for all the effort they have put in to bring us along!

[@michaelguerin56]

Great result, guys. It is over 25 years since I last pulled silly hours to complete a building project OR got by with that minimal level of sleep during a military exercise and I fully respect that you did those hours whilst producing mechanical and structural engineering of that quality. I am looking forward to the future episodes of this series.

[@safespot69]

Gale Bakes truly a national treasure

[@stephenmoxley3004]

I was lucky enough to see this truck at the SEMA Show and was totally impressed by it. What an amazing creation. I was also fortunate enough to have a long conversation with Matt and found him to be a really nice guy who is also smart as a whip! I'm looking forward to see the continuation of the saga on You Tube.

[@motorheadronnie]

I've been a gearhead and tinker'r all my years and appreciate all the work the people at Banks do, and especially Gale's knowledge. Longtime follower and customer. "When perfect will have to do."

[@bankspower]

Right on, thank you for watching and following the series.

[@caterpillarslim1288]

I was really hoping to hear it run! Oh well I'm sure we'll hear it soon. The supercharger and intake horns look so sweet and the fact that the wheels pull air through the brakes is insanely awesome!

[@jfro1963]

You all have done an amazing job to get it all put together for those always impending deadlines. I am in awe of your team and cannot wait to see the rest of the development series.

[@PiDsPagePrototypes]

Looking forward to seeing what the emissions look like at the final power output. The interaction between Gale and Rich at the end - speed guys are speed guys, all over the world, we all think the same answers :D

[@MrCarnutbill67]

Those inner fenders are fantastic. Most people throw them away but these are a focal point of the engine bay. Well done.

[@ColeSpolaric]

I can't wait to see this actually driving!

[@bankspower]

We'll be smokin' the tires before Christmas.

[@D3AThCAl2DS]

@@bankspower Christmas isn't Christmas...without Christmas smoke. Its beautiful Gale.

[@jackiejoe8930]

Great video. Go to see a leader (Banks) thanking his team (all the supporting vendors). I wish I could have seen Lockjaw in person, and all the great minds all in one place at SEMA thanks for sharing. Now im still drooling to know what Gale learned to have him go to a supercharger.

[@RGHTBrainDesignDrive]

The Legend! This was so great to see at the show this year. Thank you guys for doing all you do.

[@johnnieo66]

Definitely one of the coolest projects at SEMA, leave it to Gale, ever the pioneer and innovator, hats off to Gale and the boys and all the other suppliers. Great stuff. Gale is the real deal and no doubt a survivor of the phases of the industry, Fantastic.

[@nickhowell168]

I had to create a playlist just for this build. Absolutely phenomenal.

[@bankspower]

Love to hear this. Glad you enjoyed the show.

[@patbullard9276]

I’ve been right with you on all of the utube videos and want to congratulate all of the team from Banks and the many highly skilled professionals who worked so hard to make it to SEMA. Great videos and a great build and I look forward to the continuing developments.

[@JayRussellDuramax]

What an amazing truck! Well done everyone at Banks and beyond who build this! Thank you so much for sharing it with us! I'm SO excited to see that engine on the dyno!

[@seanlever9361]

So looking forward to hearing it run and seeing a drive can't wait

[@bankspower]

Same here, we are going to fully send this truck into existence with a massive burn out when we crank it up for the first time.

[@snakeman48]

That is one awesome truck Team Banks. I watched the whole series from day 1 and can't wait to see the rest you guys have in store.

[@sailortristan]

Thank you to everyone involved for such an excellent build series! I can't wait to see what's coming next:)

[@bankspower]

Our pleasure! Thank you for watching.

[@bamafan-in-OZ]

Well done to everyone involved. It is a function piece of priceless artwork. It has been so awesome watching this build, thank you for sharing this experience.

[@drewparcel1727]

The wheel design is similar to what I have been wanting to do for a long time and surprised I have not seen it before. My idea was to use the wheel design when in forward rotation at speed to pull air from under the car and force it outwards to help suck the car to the road for better handling. My idea would provide cooling to the brakes as well. I've never tried to produce anything, just a wild dream I had years ago and have always wondered if it could actually move enough air to work. I enjoy seeing the very creative design here especially when you can create 1 part to do more than 1 function. I know I am a little late to the party in watching this video but I had to leave my 2 cents. Great work all around guys!

[@ODGColornChrome]

Well done gents! That is an awesome build! I want a pair of the hood hinges!

[@MJPilote]

Only Banks has the resources to pull that off in that timeframe. I have seen some fine fabrication but everything is always shadowed by how much this company can get done in so short time! There is not a single compromise on any of Banks builds our product it's just perfect, Gale is the lord of diesel! All hail Gale!

[@69Shinglers]

Need to hear it run! Looks beautiful guys GREAT JOB!

[@frediefarmer]

Awesome build.. love the blower..👍🏽👍🏽

[@kparchment]

LOOOVE the engineering behind this truck. Crazy how a supercharged 6.6 diesel makes that much horsetorques n little to no soot. Kudos!!!

[@stuartsmellie4966]

Loved seeing Rich Rebuilds talking with Gale, that could produce some fun projects!!

[@Taillighttim26]

That's one nice truck all the custom details are not only great looking but also have a performance enhancement to them

[@davidstrickland1260]

Amazing job guys. So excited to see that motor on the dyno. Gale Banks you Sir are a invaluable piece of history and continue to be on top. I would love to pick your brain about a couple of projects I have going. I try my best to absorb all the knowledge I can from your videos Thank you Sir for sharing.

[@luisdasilva2324]

I love this so much I work 13 hour day every day I literally come home and can’t wait to watch love y’all so much can’t wait to see that beast doing real street pulls 🖤🖤❤️❤️

[@OvensGarage]

This is an awesome video series, you all did such a great job on the truck! Can't wait to see more.

[@ArielCalonne]

Wow! Gotta say, Gale Banks is a hero --

[@roycehamer2800]

I have watched this series and I doubt that it could have been more interesting. Also Gale to me is a deity with the way he operates. When I was much younger I had the first private shop with a chassis dyno in Canada and what Gale Banks has accomplished was also my ambition however my family (partners) did not share the same vision. I hope Gale stays young for ever I love what he is doing.

[@nosefirst]

Got hooked on the video series, it would have been worth the trip to see it live at SEMA.

[@jasonhughes3587]

Watched every minute of the build, this is probably my favorite truck of all time.

[@bankspower]

We are humbled. Thank you for watching and for the compliments.

[@CubsRule1231]

Our family members at banks Dwight from skips automotive machining wished we could be there with you all for unveiling of lockjaw Your workmenship just gets better by the day God bless your American made methods

[@mikewest5529]

Mr Banks could sure make a great president!! He’s got that swagger!

[@dh2360]

God bless the Banks family and their employees! Their diesel concept is the future.....

[@r.f.barleeus7397]

Really amazing!! Great job for all the people that worked so hard. Again great great job

[@bankspower]

Thank you so much! We loved building this truck, and we love hearing from our fans. Stay tuned for more action coming in season 2.

[@theblackbear211]

Man, you guys put your heart and soul into that truck! But it sure shows! Great job!

[@bankspower]

You got that right! Thank you for watching!

[@BH-po6wu]

Gale Banks one of the best in the industry hands down.

[@bankspower]

Thank you!

[@shaunhuckabee5904]

Such a phenomenal build by the Banks team! Can't wait to get my coins up to have Gale build an LML and L5P for me! Durtymax for the WIN!!!!!!!!!

[@dougfinn8002]

So far this is a fabulous silent movie …can’t wait till you add the sound!!

[@mesh1248]

U guys did an awesome job, the time and effort that this involved is mind blowing

[@walterwhite2270]

To Gale & Eric and the rest of the team...Well Done. You should be proud of what you did with Lockjaw. Gale we all know you are very much into diesel but couldn't you make some of your stuff for GAS engines....OK..i will go time out in the corner for asking that.... :)......thx guys I really enjoy you shows

[@williamdice2546]

He has said in other videos that he is not a diesel guy, but a forced induction guy. Diesel just lends itself to forced induction better than gas, so it has gotten his attention more.

[@jacobmoses3712]

What things are you talking about? Ram Air intakes, headers, i-dash, twin turbo gasoline V8? There are some things. I'm sure there is more on the website

[@davidstephens1092]

Well done to everyone involved.

[@levicharles996]

Finally a full reveal 👍👍👍👍 can’t wait to hear this monster fire up and shred some tires

[@donaldcovington9448]

Such a nice rig you have built I would love that combo on my 83 Chevy 3/4 4x4

[@helistorm98]

Finally! Sema was 2 weeks ago!! What an awesome build

[@paulcopeland9035]

Well, if you are disappointed ask for your money back......Oh wait!

[@LeeCazier]

Great job looking forward too seeing it run

[@jhans3278]

Thanks guys for a great built and great series of videos. Was Lockjaw driven on the street prior to SEMA? I haven’t seen any road tests.

[@heythere6922]

Thank you Banks, thank you so much!

[@maydieh]

Can't wait to see it on the dyno

[@jakemichalski2357]

Truck is amazing the engine is just crazy I can’t wait to hear and see it run #Bankspower

[@bobcook231]

EXCELLENT WORK !!! THE BEST THERE IS !!!!!!!!

[@aSinisterKiid]

What an incredible build. This is such a cool concept. It must be a dream to drive.

[@Metalwolf765]

One of the coolest projects ever thrown at KZbin! Congrats on making it to SEMA with a real driveshaft- can’t wait to see the rest. So great that you take us through the engineering and thought process instead of slapping parts on and calling it good. Keep it up!

[@mickdemi6]

Crazy cool truck one of a kind. And to think it is only just starting. 👌👍

[@mattward330]

I really really wish the Data Monster was available in like a 5" to 8" screen option. This truck is absolutely amazing. I've always always wanted a supercharged Duramax. Incredible!

[@bankspower]

You might get what you wish for. 😉

[@usafvet6766]

I can't wait till the DROP in Diesel Banks Motor. 🙏🏻💪🏆👍🏻👍🏻🇺🇸

[@xozindustries7451]

I’m glad you guys got it done, great work. I hope to see it out on a track. A little better scheduling for next year! 😂

[@lagoonrd4173]

Like to see the tuning process ... before and after what the numbers are

[@jimjones8300]

Absolutely INSANE!!! I love it!

[@bertm6400]

Much respect to Mr. Banks and his team

[@marklengal9990]

Can’t wait until the motor is on the market

[@davidfrancies8105]

What a great build! Would you ever build a budget friendly setup? Thank you for the content

[@codychickadee5095]

Stunning build. I was hoping for an old 2 tone instead of the patina but oh well. And of course a slick manual transmission. But I'm a dreamer.

[@walterwhite2270]

i believe they discussed painting it in one of the episodes but Gale wanted this to be original....now a days if you are not putting in a dual clutch auto transmission (that can can do manual with electronic levers) you will be left at the line, especially with that much power....

[@CloudHindlen]

I can't wait to hear it...and the Gale Banks fedora hat test drive too. Lol...I am kidding, I'm kidding...Lol

[@jacobmoses3712]

He said he would so I'm looking forward to it

[@sonofthunder.]

congrats on a beauty brought to new life, can i get a lockjaw sticker?great team work

[@duramax78]

Sad too see gale getting old, but he’s doing what he loves, that’s awesome

[@paulcopeland9035]

Why is it sad? If you could accomplish 1/10th of what he has done, it would be a full life! It is inspirational to see him quick and able as he is. Bravo, Mr Banks!

[@duramax78]

@@paulcopeland9035 hah 1/10:,,, id be lucky to accomplish 1/100th Paul, I never meant no disrespect to mr. Banks at all, the guy is a beast and does more in his 70s than I do in my 50s. But you can’t tell me he isn’t slowing down, which we all do. Sorry if you don’t see my point of view Paul.

[@paulcopeland9035]

@@duramax78 Yes, you are correct. 1/100th would be a full life. I see your point of view and of course we all must realize that age is inevitable. However, slowing down for him is like top gear for most of us!

[@duramax78]

@@paulcopeland9035 totally agreed, hope you have a great day Paul, cheers from Alberta.

[@bakfixx]

Great job. Long live the internal combustion engine.

[@rickw1427]

When are we going to see this thing run? This project is looking good.

[@pyro323]

They had me at supercharged Duramax! 🇺🇲

[@joshmckinney1831]

Gale will be hard to replace one day. Such a smart guy! Hope everyone takes the time to learn as much as they can from.

[@bstiphout1]

I've never seen zombies..... untill now 🤣😂

[@bankspower]

😂😂

[@johnwinston7281]

Great job ! What's the weight of truck ?

[@MaxPower_Designs]

Oh i see Ronnie in the back at the end looking forward to hear this on C10Talk!

[@ChrisNCars]

I want all this! Keep it an 8lug, heck yeah.

[@RAWRMotorsports]

Been following this l5p for awhile now 👍🤘💥

[@dantheman9395]

I hate that it won’t make it to the east coast. Can’t wait to see more

[@twray9029]

When are the T-shirts coming out? If you are going to be on KZbin you have to put out shirts to support the build, and if not the build, a charity.

[@jamesellsworth240]

“If it ain’t broke, don’t fix it” If every Banks customer lived by that, Banks would have no business. The aftermarket industry is all about fixing things that aren’t broken. I’m so excited for the top speed run, by the way.

[@craigdoherty2974]

Wow the fab on this , great job !

[@kylem8841]

Need a billet tie bar between the bed hinges to minimize the wobble due to the cantilevered weight of the bed.

[@tedium37]

It's badass artwork!

[@riflemanjim]

Lets hear it run!

[@chrisrigoni]

Amazing build !

[@Hunter1998ice]

Those wheels are so cool

[@MuscleCarGarage2022]

True Mastery in the art of Hot Rodding

[@timothyearp631]

Looks awesome. When is the crate program starting?

[@brettburgess677c6]

Are you guys going to finish this build and drive that thing?

[@erikkekkonen2941]

this stuff is way above my head but fun to watch !!!!

[@CobraP1989]

Lok jaw is badass I wish I could drive it or ride in it you guys made one badass truck