Review of Chefs Choice 615A Meat Slicer

[@xijin1194]

Fantastic,that’s what I need, I’m in UAE, hope there’s shipping service. Thank you for your video!

[@Twosleevers]

Thank you for watching, glad you liked the video!

[@davewilson1411]

FWIW, one thing I'd add to the video is that at least with meats and cheeses, you really do need to slice slowly. Three things can happen if you try to go too fast. First, the gauge plate that the meat rests against will flex, giving you an uneven slice. Second, you could strip the plastic gears out and have to replace them. Not a big deal as they are under $20 from ChefsChoice. Biggest issue though is that you can burn the motor out. In the vid, watch and listen to the part where the sharp cheddar is sliced. You hear the normal whir of the motor before slicing and a bit of a change in pitch when it starts to slice. But listen closely right at the tail end of that slice. You can hear the pitch drop even lower. The long explanation is that with it being a longer piece of cheese, the motor was working harder to get through the end of the slice. Kind of like an underpowered car going up a hill. The longer it's on the incline, the more it struggles. Same with this slicer. Hearing that sound once in a while isn't a big issue. However, IF you try to force meat or cheese through and your motor is making that deeper whine the entire time, your going to burn it up pretty quickly. It's not a Berkel or a Hobart. You aren't going to be able to just zip right through a couple of slices of ham per second. Then again, it doesn't cost $1500 or weigh 100lbs. It's a quite capable slicer IF you work within it's limitations and you don't try to push it too hard.

[@Hockeyfan9884]

As with the chuck roast cut , good presentation, prior to however , ALWAYS shut down the machine BEFORE picking up presentations . Safety first ! Great review by the way , thanks for sharing and will purchase this slicer .

[@Will-zg4ur]

Excellent. I wanted to make sure this had a long enough swing to fit some pork belly in it and it appears that it does with the ham test. Thanks a million.

[@DJ-hs8bp]

Just purchased and seems to work great! Thrilled

[@Bigheadedwon]

This is a great video, thank you for showing so many different meats being sliced. Looking for something to slice sticks of Pepperoni and cheese, this looks like it would work great.

[@druonysus]

But how do you clean the blade? I have one. Used it once and realized when I went to clean it that I'd need to clean the grease off the blade and I don't have more grease to apply. Where do you buy new grease, what kind is it. How to you correctly apply it?

[@barnaclebob123]

"18 instant pots and 14 air friers" im dying. thanks for the review

[@Tri-Cali]

Nice review. I like the different camera angles. Thanks for the upload.

[@PamelaKS]

Nice review. I’m sold. Thanks.

[@dancinginabundance]

Love your closing - 18 instant pots.

[@garrettgauthier6366]

I just got mine today! Haven’t taken it out of the box, but I got my from Williams-Sonoma and I believe the straight (non-serated) blade is included when purchased from WS. Thank you for the tutorial!

[@Twosleevers]

Garrett Gauthier thank you for watching!

[@wendysoulliere1305]

Did u get it in Windsor, Ontario

[@DianeGemma]

Great video. I'd love to see a video on how to clean this slicer.

[@aerialphotography8363]

Great video! Helped with me picking out a slicer! Liked and subscribed!

[@show4]

This is probably the best video I’ve seen! Of course I’m gonna buy it right now. Just can’t decide if I really need the smooth blade. Does it matter if you use food grade gel lubricant or grease? My dog is gonna love getting a bunch healthy chicken jerky! You almost have a Wilfred Brimley tone to your voice!

[@MrJusjones0110]

You can tell the support for the meat is flexing. Will have to rotate meat and cheese every couple of slices for sure. Or end up with a triangle left over.

[@chasemorantz6228]

With the chuck roast I wonder if it’s better to cook it first, then refrigerate so it’s firm before slicing. But something I’ve heard is an issue with meat slicers, especially the cheaper ones, is the motor will run very very hot and also meat gets stuck in the slicing area and it stalls

[@ChristianRodriguez-tv4ct]

I'm in the market for a slicer and I really enjoyed your review. Thank you.

[@KevinBReynolds]

Nice review. Thank you.

[@AesopsRetreat]

Out of ALLLLLL the slicer video's I've seen NOT ONE of these sliced at #1. Am I the ONLY one that likes paper thin meats that can be stack-able? How can I tell if ANY of these slicers are capable ?

[@MrJusjones0110]

They are not able to slice at 1 or less, when you push against them they lose setting .. there is a reason they don't slice at a one with something that requires pressure.. that said they are the best for a cheap and easy to clean price range.

[@TheRangeControl]

What are the distances of increment between slicing notches?

[@pusongpinoy754]

Nice presentation, what is the warranty of this machine

[@luigigdelucia1333]

This always works for me my Mom showed me this trick place your beef in the freeze not to solidify it just enough, you will have to experiment it will save the blade, make the sharpness on blade go further anyway experiment and happy slicing exxelent video God Bless

[@belimage]

Thank you so much for sharing. Now we know what slicer to get. Take care God bless

[@aliceeads5103]

Will it work on a 6" round roll of FROZEN meat? sliced thin.

[@IMOO1896]

Great demonstration

[@talkingstick2u]

Have your tried doing cabbage with this? Does it make good cole slaw?

[@Murzington]

If you're doing cabbage just use a mandolin slicer. It will get you good thin shredded cabbage for slaw.

[@talkingstick2u]

@@Murzington I bought the slicer and made 10# of cabbage into sauerkraut. I could easily do 1/2 of a small head and 1/4 of a large head of cabbage at the time and didn't have to carry the weight of the cabbage in my hands as I would with a mandolin. It works great! Also works great for sourdough Rye and I'm loving my perfect slices of the heavier bread and for that alone the machine is well worth it. I can quickly slice and freeze half of my loaf. On the downside however, I tried to do thick slices for Vidalia onion rings and the slices get only so far into the blade because the back of the machine juts out (the way it is designed) and doesn't allow for the slicer to carry through the motion. I had to make thinner onion rings. So basically the machine does NOT cut thick pieces.

[@ML-sm8zc]

It's such a noisy device ! My God, I can imagine my neighbours reacting at all this noise at 5 or 6 AM for cutting my bread to make toasts ! And the thickness seems to be a big problem also with those devices. I like my ham cut ultrathin and I think those devices couldn't cut that thin.

[@nevermined2233]

any issue with the plastic gears? why would they use plastic gears?

[@Twosleevers]

No issues but I asked myself that same question.

[@davewilson1411]

@@Twosleevers They use plastic gears to keep the cost down. No real worries if they get stripped as you can buy replacements for under $20.

[@ElGrecoDaGeek]

It helps to chill/semi-freeze raw meat.

[@vickitino007]

Can we slice chicken breast into three horizontally parts... 🤔 I have a burger business... Please suggest and help me... 🤗

[@Twosleevers]

Vikrant Kshirsagar yes it’s will so a nice, even job

[@KINflix]

what's the glove you are using?

[@JoannaHarrington]

It's called a cutting glove

[@brianhancey457]

Works well with cooked meat. I had bad luck with raw meat (eye of round for jerky). Not very easy to clean. The piece that the blade connects with is plastic. It has broken. I can't find a replacement part. I had to throw it out. I had it for a few years with light duty use. I have replaced it with a small commercial deli slicer. I am much happier.

[@marideathydeelz5334]

That’s fancy. You did a professional job, Mr. Roger. I am heartened by your safety, but as sure that I wouldn’t be. I will have to purchase slices, although none as thin as “your damn near a potato chip.” 😁

[@dramc-ov3cp]

Hey Pops, how about thin slicing that ham, like a deli does for sandwiches, can it do that? Everything you showed I can do faster with a knife.

[@Twosleevers]

dram2500c yup it will slice paper thin ham as well as thicker slices. Honestly it’s a great machine

[@Sharkboyhecky]

Mine broke

[@Sharkboyhecky]

I’m so sad that mine broke where the fastening middle screw that holds the blade. I can’t seem to find the replacement part for it. It’s a very simple fix, I just can’t seem to find the piece online. Please help guys

[@MyTaylorb]

The motor is inadequate. It is straining to cut everything.

[@davidwebster621]

capicola or copicola does not have an "R" in it.

[@thomawhite]

Even though this vid is 2 years old - just a warning! If anything goes wrong with the slicer, you can throw it away. There is no customer support. None. I tried for 3 months to get a replacement part. Service department wouldn't even reply! I threw the thing away.

[@victormuller4462]

noisy and slow due to a lack of power.

[@emila6]

I love this guy lol

[@Twosleevers]

One true name I do too! He’s a keeper all right 😍

[@emila6]

@@Twosleevers true

[@spydirty2530]

Kapprakollor

[@beverlycahill8196]

Univex meat slicer

[@TheAllang123]

Great video. Please turn that noisy machine off before we hear your golden words of wisdom!! Thanks.

[@Twosleevers]

TheAllang123 thank you for your feedback! Super helpful

[@surrealchereal]

Nice video, but I have a couple knives and I live simply... I don't even have a Kitchen Aid mixer, I use a spoon! I don't know about the price, it seems like a lot just to cut stuff, but maybe if I had a huge family... It would be great.

[@bcfran3g844]

I am only me. I have the 615. It cuts evenly, and way better than my hands can do.

[@bakelitsuisse7707]

Great video! What a noisy motor... I own the Berkel HL 200 and can’t even hear it!

[@edwardk12687]

I mean it's not really fair to compare a berkel to this thing lol

[@bakelitsuisse7707]

@@edwardk12687, indeed, your are correct hands down...

[@bigdog107no2]

Total junk, after the third use, the plastic drive broke!

[@ScinnerNo1]

All these cheap machines can cut. But the more expensive once can cut real THIN slices, like you would get a serano ham sliced.

[@Twosleevers]

ScinnerNo1 we get really thin ones with this. But maybe not paper thin

[@ashbueno2699]

Do you think this would be sufficient for cutting up beef thin enough for carpaccio? Any recommendations of a meat slicer that would be good for that?

[@BHUT-JOLOKIA]

Noisy!

[@Drippin94]

Bought this meat slicer and it sucks! Terrible broke on the first slice of cheese. Is this an unbiased review? Why is there a fuse bad design!