Review of the KMC XD Series Pulley Wheels on Dodge Dakota

[@NXT_LVL]

2:20 Those are like the H spokes for the Viper or even the RT wheels for 2nd gen. Which ALL the viper wheels are the same pattern 6 x 114.3mm (4.5") just the wrong offset. After 05 all the trucks were 5 on 5.5" if I remember correctly. Thats why I'm getting a set of the RT wheels for my SLT Quadcab, no worry about backspacing or having to run a spacer and worry about cutting the studs. You are limited in tires at the original 255 width, in fact only two brands sell the actual correct OEM sizes. But if your upscaling your wheels you do the tires too. Which broadens your choices, once you add in 265 and 275 as the width

[@devonp326]

Looks great! Love that look on the truck, glad I got to see the before and after in the shop. Looking forward to more videos on the truck.

[@martinbuilt]

Thank you, Devon, glad you like it.

[@davestewart9146]

The truck looks great and you look like your feeling better my friend 👍😁❤️

[@rperron3439]

Hope you’re feeling better Martin, looking forward to what’s next on the Dakota 👍🏻

[@martinbuilt]

Yeah it's been about like a month or more since I had covid and finally back to feeling a 100%

[@Kolonol1]

Thank god you went with chrome...you said new wheels and I saw them in the box and was thinking "oh no not you too"

[@danhambrick6331]

Those wheels and tires look awesome on the Dakoder...💪💪

[@piercerich9]

Love the dakota! Looks awesome. If i wasn't 6'5 id definitely drive a single cab!

[@martinbuilt]

Yeah I could see we're being that tall could make it rather cramped in a single cab Dakota.

[@DiaLFonZo]

Not a lot of informations on those wheels, thanks for sharing. :)

[@joanschmuecker3148]

That looks awesome! Nice job!😎

[@martinbuilt]

Thank you Joan I'm glad you liked them.😊

[@galaxyearth60]

I think you're looking for a wheel like the Dakota R/T wheel. And it fits your truck and it's factory and looks good.

[@martinbuilt]

Yeah, those wheels from the Dakota RT or Durango RT would have been great, but they seem to run twice what I paid for these wheels.

[@winstonemerson2439]

I'd like to lower my Dakota.How hard was it to get aligned after lowering,what is flipping the axle,and how doesmit ride?Thank you.

[@gilliland426]

i like the stock 16x8 aluminum wheels on my 2001 4x4 and 2004 2wd crewcab pickups. those black rims do look nice on your truck.

[@martinbuilt]

Yeah, I like the looks of the factory wheel. I wish I could have found the 17" ones from the R/T models. But these black wheels have really grown on me, and they are super easy to clean.

[@dominicdevito4200]

Hey Martin, if you find those caster and camber bolts let us know where you got them. I cant them from the dealer and I'm getting run around figuring out which ones are 2wd and 4x4.

[@TheIndustrialApprentice684]

Hey martin. Off topic question. Will the stock retainers and keepers work with the comp beehive valve springs you mentioned in an old video of your jeep?

[@martinbuilt]

Yes, they should work.

[@craigbutler024]

Pretty sure the dodge viper has the same lug pattern. I was looking at a set of wheels for my durango and came across a set of used 18x10.50 viper wheels and said they had 6x114 lug pattern

[@martinbuilt]

Yes that is correct, 18" wheel would be as big as I'd ever wanna go on my Dakota but I do believe the Viper wheels are staggered where the fronts are narrower than the rears and I wouldn't want to do that with the 4wd that I'm looking to make all wheel drive.

[@Artlopez105]

Like the chrome version

[@martinbuilt]

I like the chrome ones too, wish I could have made them fit.

[@Artlopez105]

@@martinbuilt Can you please tell me what I should do about the truck being on a incline or should it be on a flat surface before I install the engine

[@martinbuilt]

@@Artlopez105 as long as the engine is parallel to the truck you shouldn't have too many problem.

[@Artlopez105]

In you're opinion do I need to remove the cross member on the transmission

[@allensnook7760]

Wont that be the wheel bolt pattern on the wj.i ran into same issue and had to run spacers that changed 4×1/2 to 5×5.

[@allensnook7760]

I had the 4×1/2 on my 98zj and it rusted out so then i bought wj to replace.but liked my wheels.yeah e-bay and amazon only gives one dimension look n never much stats on parts so ive bought stuff only to return immediately sorry u had a bad day martin.snooky pa.

[@martinbuilt]

The JGC WJ has a 5 lug 5 inch or 127mm. The chrome Mopar wheels have a 5 lug 5.5 inch or 139.7mm. I'm glad I finally found a good-looking, easy-to-clean wheel for the Dakota.

[@JohnSmith-ot9sc]

Nothing looks better than steelies on a truck / jeep imo. Picked up a set of TM9's with 3.75 bs from 4wheelparts for my xj little bit heavier than the stock alloys but looks sooooo much better. You gonna drop that built HO in the Dakota?

[@martinbuilt]

I almost had another HO engine for the Dakota but, I pulled the head at Pic-a-Part and found that it had dropped a valve set and destroyed the piston and cylinder head.

[@JohnSmith-ot9sc]

@@martinbuilt LOL it's funny you say that I literally just left my local scrap yard and saw a 04 GC with an HO someone cannibalize for the cams it truly hurt my heart 😞. Scored a NP 231 with an SYE & front drive shaft hopefully it's not too out of balance 😀

[@mikegeiger6420]

Nissan frontier has same pattern. Sometimes that give more results. I'm putting AR931 on my Dakota. Black 6 spoke. There are a couple other options for 6 spoke that escape me though. Love your content Martin. Keep it up!

[@Artlopez105]

I am installing a engine in a 2003 Dodge Dakota 4.7 that I just had rebuilt I'm having trouble getting the engine in and aligning the motor mounts and the flywheel I think that the truck needs to be on a flat surface but I am not sure I am at a incline in my driveway I think that the truck needs to be on a flat surface but I am not sure Do I need to place the truck on a flat surface.

[@martinbuilt]

not necessarily, maybe check the level on the transmission. If you have the motor mounts installed they could be hanging up on the motor mount brackets.

[@takuachetiktok3787]

the tires size the u put are 265 right

[@martinbuilt]

245/70R17

[@takuachetiktok3787]

@@martinbuilt thank you

[@alexanderstefanxandraswedi5835]

Great video sharing

[@martinbuilt]

Thank you, Alexander 😊

[@getoutalive852]

Paint those lug nuts to match body paint and it would look awesome

[@martinbuilt]

Yeah, I'm planning on doing that. That blue is just a little too light of a color.😎👍 Thank you for watching.

[@SmudgyContent]

Viper wheels fit but kinda costly

[@martinbuilt]

Yes, they are, so are the 02-03 Durango 17" chrome wheels.

[@Danielprokopij]

Are you gonna swap in WJ leather bucket seats in that bad boy? 😼

[@martinbuilt]

No, but I have a set of buckets being recovered for the Dakota right now. Don't know when they will be done. It's been going slow.

[@craigmikesell7839]

Personally, I don't care for the blue lug nuts, but do like the overall look... think that I'd look into the repurposing of some oversized mudders for the fender flares, but I am more interested in off-road driving than looking citified, lol. Have you seen the repurposed fender flares made of used tires?

[@PhillyDee215]

😎

[@charlesnickell7257]

2006-2021 Nissan frontier wheels work on your truck