Reviving my FIRST Ever Project Car!

My first ever project car just so happened to be a 1994 Acura Integra. Through the past 10 years of building this JDM legend, I have right hand drive converted it, swapped a JDM front end onto it, JDM 5 lug Integra type R swapped it, rebuilt the transmission, but somehow, never replaced the clutch haha. Shout out to my brother ‪@PrizzaNate‬ for helping me tackle this job in his garage!
Outro Song: Thisistoodifficult - Used to You
PrizzaMerch:
prizzamike.mys...
Become a Member to access perks:
/ @prizzamike
Spotify Playlist:
open.spotify.c...
For more behind the scenes:
Instagram: / prizzamike
TikTok: / prizzamike
Snapchat: @prizzamike
Discord: / discord

[@PrizzaMike]

Thanks for stopping by 🙏 Here's the background on my FIRST Project Car: RHD Integra kzbin.info/www/bejne/l4mvlHxuiLaGo6c

[@thesniperofcs]

What is the name of the outro song ?

[@PrizzaMike]

@@thesniperofcs thisistoodifficult - used to you

[@thesniperofcs]

@@PrizzaMike Thank you bro 🙏🏻

[@ajnorris1084]

You can see some bits come out of the engine when you first drained it

[@Dinguslordx]

Been waiting patiently for this! Super excited to see this car get some work done to it. Edit: Nick did an incredible job. I had no idea those wheels were going to look so good.

[@PrizzaMike]

Me too man! It's been too long since I've driven this car haha And Nick KILLED it! I couldn't believe how perfect he got them haha

[@ianjenkins4641]

It’s nice to see your brother helping you out. What a good lad

[@vlonerob]

Been watching for a while now and you honestly motivated me to buy my first project car and I love working on it. Keep doing you man!

[@PrizzaMike]

Appreciate you man! What project did you pick up??

[@Mcc_3000gt]

@@PrizzaMike3000gt?

[@vlonerob]

@@PrizzaMike I got a 1998 Nissan hardbody and it’s sick

[@mtvisaac]

@@Mcc_3000gt What a car for a first project. Love those things.

[@Cei-1i4]

Awesome seeing more work on the Integra, love the vids!

[@PrizzaMike]

🙏🔥

[@therealjhall833]

Your timing is absolutely perfect thanks Mike !

[@KiritoGekko]

Yo, sick to see that car is holding together. 10 years is an insane amount of time for a car to last. Just proves me right, they dont build em like they used to. Also was that the quarter panel for the Gloria i saw there? SICK

[@PrizzaMike]

So true! They really don't make them like they used to!

[@screamerchaotix5182]

3:18 That gold flake, tho!

[@jame.-s742]

didn’t know how much i needed the integra to come back. got a JDM 1998 Accord SIR-t. sounds the same makes all the same beeps, suspension all similar, had the binded bolts in the bushings and the seized rotor screws that stripped so i had to drill out, the zero clearance on the drive axels. it made the attempted CV boot replacement a huge failure but i’m glad i can see the other side LMAO

[@Dopamine_garage]

Great job Mike. Love how the car scene looks in your area. Great community. Here in UE, car scene will die pretty soon. Load of regulations is already here and more are coming. Love your "it is what it is" approach when it comes to cars. Once again, great content 💪

[@taeganjaydepoole8159]

finally Mike finally!!😭 i can say ive been waiting so long and patiently for this video on the little honda, and thanks for the video Mike keep up the good work

[@garycallahan7867]

Using one of the spray and wipe detailers on the pillar areas and the door gaskets will help prevent the frozen sticking.

[@whopperwitfries8754]

I love the integra content, got to see the z at final bout this year but happy the integra will be back

[@asosa7100]

You’re a trooper for replacing the clutch when there’s snow ❄️ out 😥

[@SERP92_]

yup, its hard in the winter, I just took out my diff and put in a welded one yesterday and I had to do it outside in the snow, I made a fire to keep me warm and used a flashlight to see what I was doing as its dark outside at like 4PM, took me two days but it was worth it!

[@mickfbr]

Those rims came out amazing, awesome work 👏

[@Sebs.garage_]

I've seen that type of failure a lot on B series. Idk if it's mostly a thing that happens to Exedy discs, or if it's because I primarily run Exedy clutches, but the cracking around the springs is pretty common.

[@benchi223]

My dad used to be in the garage for hours polishing wheels into mirrors nice job your buddy did there👌🏼

[@ashermorales8276]

my brother and i replaced the clutch on a del sol two of the springs fell out and chewed up all the flywheel bolts. thankfully the socket was still able to grab the bolts and we were able to get them off

[@calebskeeper3553]

I love ur content & ur work on these cars. U have great helping friends.

[@soup6081]

7:25 that exact thing happened on my buddy's RSX-S and it was starting to happen on my 93 Integra. I think over the years the metal gets weak and pushes the spring out

[@Halfangelsinner]

Ur so lucky to have a brother like Nate

[@ruisvx]

Bro, I’ve learned more things about fixing cars watching you thank you for making your videos so informative and look so easy makes me want to buy a second car just to fix it lmao 🙏

[@ManzitMatt]

Love ya Mike happy December. Almost in 2024

[@screamerchaotix5182]

Also, broken toes suuuuckk. I too spent October in a boot!

[@PrizzaMike]

Nooo, I imagine that must suck... I've luckily never broken a bone somehow haha

[@skulltrouper2289]

Totally love the Integra content! Its great to see that the OG integra is back on the road! And the cliff hangar at the end! Cant wait to see more Gloria content🤘

[@953000gtbe]

FINALLY we get er! Yeah....we hate winter....but.....gotta love winter for getting THIS type of content.

[@PrizzaMike]

The cold grind! 🥶

[@bigmanbuilds]

Ahhhh snap the og teggy is back! Would love to see you re do the quarter panels on it too. If you got the sedan back does that mean franzy is going to winter drive the 240?

[@RayRaspberries]

when you pull out these honda videos it brings me back to when me and my old buddies would go road racing. Living in california means weekends full of canyons shenanigans. I plan to buy another honda soon, I just love them too much.

[@MrGrentch]

Funny enough... Two years ago my Teg needed a clutch at 170,000 odd Kms. Hard to get into gear and heavy as feck(though I only noticed that after the new one went in). Luckily years previously, at a time here in Ireland you'd struggle to sell a Type R for 3k, someone had sold me a brand new in box Honda clutch kit. For _40 quid_ I'd heard clutches were really long lived in these, but thought for that money why not. I go to pick it up from my friend/mechanic after he'd put the new one in, and guess what? The clutch disc still had a bit of meat on it, but just like yours one of the springs had let go and was actually loose inside the housing. 😳 So maybe it's a Honda thing? 😄 My friend said he'd rarely seen that before.

[@Poprocker]

18:41 Your such a legend for the Title Fight

[@stevethegoat24]

Literally have just been patiently waiting for another teg video by far my favorite one of your cars the Gloria is a close second tho can’t wait for that quarter to come in so I can see the finish product

[@hereforthecomments1818]

Honestly I had 3 springs pop out of my brand new clutch after 2 weeks of normal highway driving. Its more common than you might think, the next clutch I go has been going strong for 5 years so it is what it is, car stuff.

[@zyiink]

Happened to me on my old e46 325ci was so annoyed I have photos I was so shocked bro haha only time I’ve ever seen it

[@ramonamoros817]

What up Mike. I like watching your videos when I get the chance to see them. I like the work you do on them car keep the videos coming. Would like to ask where your from. Them rims looks nice. He did a awesome job on them. I'm planning to get 17 rim and have the chromed.

[@laysarlizard5058]

Love the look on the OG teg! What are the rims called?

[@tony_dr]

Love that intégra so much ! Beautiful

[@fatboilxke9037]

“Hate to drive these cars though winter” FELT THAT! I feel so bad daily driving my evo X through this bs

[@sixeight8621]

I love these integra videos. It makes me always want to go to do work on my civic even though it drives perfectly fine haha. You are so inspiring. Keep up the great work. I also appreciate all the part numbers and tips you give for these hondas.

[@feeblymonkey]

Been watching for a little over a year now and I must say every video you release is perfect entertainment 🎉

[@thezootfather]

Those wheels cleaned up nice! Props to yer guy!

[@SOUTHSIDESUPERSTAR]

Man it's so cool to have a brother that's into the same stuff and help at times. Wish I had that

[@vics.diecast.garage]

Wow those rims are 🔥🔥🔥🔥 Can’t wait for more work on the Gloria

[@mybrainmeatshurt]

I got no excuse for not working on mine. Something I learned with my '95 when starting a car after sitting a long time is to turn the key to ON so the fuel pump runs for a few seconds, key off, then repeat that cycle a few times, then she'll fire up without beating on the starter.

[@cb7mike726]

Yo Mike 3:25 on honda's you do not have to take apart the entire front suspension. You can pop the lower ball joint with a fork and hammer and you will have enough wiggle room to take the axle out. You then can slide the whole knuckle out of your way.

[@neilbradford4958]

Amazing job on the wheels Mr Nick

[@ronaldlefavour1987]

love the vids bro. RIP BIG BRO PAUL

[@mackie_p]

Hype on skate feature chrome guy to be back lol!

[@GRMonty]

About time you did something with the integra. Would love to see you work on her more

[@sustym1748]

I wanna see that integra bodywork in good shape and one color one day!

[@NoooNamee]

I missed this car so much, good to see it back

[@leventejavorka7511]

10:28 juice is looking kinda fire. Keep up the good work Mike. Finaly a guy who is honest about his videos... I always wondered how do you take care of all your cars...

[@SlammedS12]

Man i want to be just like you I love how you rebuild so much stuff. right now im rebuilding a mazdab2200. you inspire me so much to keep building stuff keep it up man.

[@rodrigo4379]

Damm i love integra content man! Can´t wait for more videos :D

[@giannismaritsas3475]

Original work truck back in business 🥳

[@yesimhuman]

Polished 32 wheels look great! mad respect to Nick

[@lloydshondabordello]

Awesome video Mike. Those R32's look amazing... I know they're not for the Honda daily, but I hope they are (used to have R33's on my EP3R)

[@maxuniverse6002]

Dude, seing you work with your bro looks like you are working on cars with yourself, he looks just like you its insane 😅

[@FluePeak]

Prizza uploading on a saturday is just the best gift i can get :)

[@Izuna_Elenore]

Worktegra makin a return!❤🎉

[@toiletgaming2005]

15:11 the screws are actually quite weak and a hard hammer blow will snap the head off and the rotor will come flying off

[@freshii366]

my e36 recently lost its clutch suddenly and completely. The center spline broke free from the disc itself. Center spline at transmission speed, clutch disc stuck at engine speed, bad grinding noise. New parts in soon. Weird failure mode i think

[@LOVE-VIBES-X-PROJECT-CARS]

Nice work man glad to see it's fixed

[@PrizzaMike]

Thanks man, just need to put in the rest of the trans fluid! Haha

[@chaack70]

springs in clutch are there for reason. if you dont have springs in clutch plate, you need springs in flywheel

[@jasonbaldwin6760]

The take off clutch noise your boy described was a common failure on the 9th gen Si's. Mine had it at 70k and when it was replaced I went with Exedy Organic and 11lb Flywheel. The noise will drive you insane.

[@LittleDan1]

Love the videos man keep up the great work always finding myself rewatching your videos waiting for your next upload haha

[@drstallings_314]

You make that work look so effortless. I look forward to drifting with you next season

[@TheGogal88]

Mike's videos prove that all you need is one battery and a dream to accomplish your goals!

[@embergaming4226]

Let’s go Mike!!!! Love your freaking videos such an inspiration

[@MyWolffy]

I’ve had the same exact thing happen. Common actually. Springs fly out. Wild but yup I’ve had it happen oddly enough.

[@psementalist]

A Saturday morning isn't complete without watching PizzaMike

[@dubiousf00d]

Crazy to think its been 10yrs! Still feels so recent

[@southvibess]

hey nice video Mike!! glad to see some integra action once again))

[@ENYVIXITY]

Lest go the integra is back love to see it

[@mitch9427]

Bro that’s some great work & nick did an amazing job on the wheels he’s a great contact to have because think of all the parts he could polish cam covers & all kinds of things 🤯🙏🤝👌

[@bobthegoose2005]

Bro i love your videos keep it up❤

[@luckivick]

I remember when I Manual swapped my civic I was just finishing and I put a longer bolt to the top of the transmission and cracked the bell housing 😭 had to get a whole new transmission

[@Ryoneftw]

Now that's a cool Integra!

[@fk8bebop]

this has me motivated to drop my prelude transmission and install a new clutch 😊

[@aidenharemza2395]

So nice to see this car again

[@Salimji26]

I had 2 springs snap on my clutch as it was leaving a yearly inspection we have in the UK, I somehow managed to drive it for 2 weeks after

[@Aflameyt]

this is the Integra that inspired me to get one as my first car. nice to see it on the channel again

[@craigmiller7063]

Rollin on a maypop on that front right. The cords are showing.

[@13geeky]

What he did to those rims are absolutely insane, truly a work of art

[@beernon]

i just passed the nursing board exam and mike dropped a new vid, man, today is a good day

[@reagancarper8898]

Even on my gsr with the vtec solenoid in the way my cam seals constantly leak as well as the valve cover lol

[@JesusHernandez-cz9mm]

I can’t wait to see all of Mikes cars in a nice paintjob but He should do a budget black Turbocan paintjob on one of them

[@skinnynotsoskinny]

Those wheels on the Integra, I need!

[@xil_ef8829]

Finally some Integra action 🔥

[@giorunsthis6693]

Let me put you on even more lol, go for the S2K filter it’s bigger for more oil and fits on k and b series cars

[@PrizzaMike]

No wayyyy, I gotta check that out! Good info

[@giorunsthis6693]

@@PrizzaMike keep up the content man, love the videos

[@z-bruh3960]

Hey bro, where's your Wednesday video? Been waiting patiently

[@JesusHernandez-cz9mm]

Me too

[@briankalter3233]

@@JesusHernandez-cz9mm same here, it's been a whole 48 hours. maybe 2 uploads on saturday? lol

[@atangaming6830]

LETS GO THE INTEGRA

[@killysworkshop8080]

dude, do you have patreon or something similar i want to donate to your channel as i enjoy watching your vids. particularly your 300zx build the 300zx is one of my all time favorite cars.

[@evanproud4090]

The moment we see the gloria in full will be a great moment indeed

[@greatonest.vgreatonest.v8193]

Love the brother team work you guys do. Fire 🔥 that you to can help out each other 🤙🏾💯🤙🏾

[@GarageToys]

I spy Honda of Lisle. I always try and figure out where you’re at from the scenery.

[@TristanTunis]

Wheres the new upload ive been waiting patiently for 3 days😢

[@el59james]

me too

[@RJIGGLES]

The parts truck rides again!

[@DaveDoes_]

Hooray, 1 car with all the same 4 wheels. Well, hopefully!

[@terryjohnston3333]

Love the vids bro keep up the good vibes

[@drewzzii2998]

do u plan on cleaning up the engine bay on the Z? Specifically where u made modifications for the s13 suspension