Honda CBR 1000RR Chain and Sprocket Replacement Rear Wheel Removal

[@Davy-lf4cj]

Best sprocket and chain removal tutorial on KZbin👍

[@mack2036]

Thanks a million! You helped me finish my first replacement of chain and sprockets! All went well except for when I removed the radiator hose. Woops haha

[@lucasr822]

Yo man idk if you still read these comments but thanks for the video! Saved me time and money

[@mystichboy]

Man thanks so much for this video, I started to change my chain and sprocket today and got staked with the job, I was going to get it done by the mechanics but you helped me a great deal, now I'll finish the job that I've started tomorrow... Cheers

[@TheNeetomosquito]

your videos are a life saver for newbies like me, thanks a bunch man.

[@kevlarperez]

Thanks for the video. I changed mine last night on my 1000rr. Video is a perfect tutorial.

[@williamalmonte4541]

Thanks alot got this video, saved me alot money. I was a lil nervous since it was my first time actually working on a bike but i followed all the steps and it came out perfect

[@RideWNC]

Awesome! I knew you could do it.

[@tingpranav999]

just about to do this on my Blade - very helpful video - thanks Mike !

[@Thelos7878]

Only thing that would have made it perfect would have been listing the sizes of sockets used on front sprocket and rear axle locking nut. Damn good video, just what I was looking for. Thanks for posting!

[@RideWNC]

Sometimes bikes may have different sized nuts and bolts. I don't usually give tool sizes or torque specs. It is good practice for riders who are learning to wrench on their machines to look at a bolt and know what the size is at a glance.

[@liammcabee6246]

Thank you so much for this video. Very informative and you are a well spoken individual!

[@davidpshaw1969]

great video. thanks for sharing. love the little tips of wisdom. do you have a video showing replacement of the spark plugs?

[@thomassmekens4462]

Thank you for this - replaced my chain for the first time without props thanks to this vid

[@adriancummings2664]

Bolt cutter was the best tip 👍

[@robbidi123]

Also hold the brake down to align the rim before tightening the axle.

[@criticalw88]

Great vid, pay attention to the insertion direction of the clutch push rod.

[@MikeTheBike58]

criticalw88 Why? the Haynes manual I used to do mine doesn't state it has a right or wrong way to insert it. Only to lightly lube rod before inserting it back in.

[@bbruce1978]

Great work and you were very detail as well

[@islandlife4141]

I followed your video. It help 100%. I endend up with what looks like a breather hose, like thicker one, with a white plastic insert. Any idea where it goes, i have not a clue

[@cadidlehopper]

I have the same issue currently, just put everything back together and have no idea where this same type breather hose goes you described. Did you ever find out?

[@patrickb8846]

thank you for this video, helped me changed the whole swing arm...and using only hand tools is official

[@RideWNC]

I hate that job. I hope you greased the bearings while you had the swing arm off. Most riders will never dig into their bike that far.

[@patrickb8846]

@@RideWNC i did, my cbr has 36k on it, the spool broke off from it falling it over thats why i replaced the swing arm

[@RideWNC]

@@patrickb8846 I hate tip overs more than replacing a swing arm. :-) Glad you got it fixed.

[@gordonjmuzik]

When I took the cover off there was a aluminum washer with a oval 1/2 shaft attached to it just laying in that area & I wasn't sure where it came from. Since it fit over the rod & into the groove under the cover I figured it went there but I'll break it down & take that out tonight when I get off work.

[@jawadjaffery4586]

I tried changing the gear lever upside down for gp shifting but the hydraulic clutch comes in the way… can you please show any way of doing as you said you have been doing that before. Many thanks !

[@roadrash8334]

so I followed al your instructions. went great. went to ride and my clutch isn't working. I pulled in the clutch lever shifted to first then it just started rolling while I had the clutch in. felt like I had let the clutch completely out and was just ideling. what did I do wrong? how could this be happening? I did what you did.

[@strattonhadley9001]

if you're still active here do you remember how you fixed it/what was wrong?

[@jimjam8948]

TYVM perfect illustration 👌🏻 ✨️

[@islandlife4141]

Great instructions my friend. Can you make a video of a 2005 cbr1000rr with only 3000 original miles, what would you upgrade, leave the same??

[@RideWNC]

Bring me the bike and parts and I will do the video. I do almost every bike the same. I install everything I like. Knowing the color helps. If it is a black or black/gray, I would go with color which would stand out just a little to the guy who knows bikes. Gold Shorty levers, Red Galfer braided lines, EBC HH pads front and rear. If the chain has started to rust, I would do Gold Chain, black steel Vortex rear sprocket. ProGrip Superbike grips with heat pads on the bars. Heated grips is the best mod every street bike needs. Sometimes it is 60* out and the summer gloves are just not keeping your hands warm. Orange or red 90* valve stems. Bridgestone S22 front -190/55-17 on the rear to make that bike corner better. Possibly a Corbin seat to make those long rides more comfortable. I don't like cutting off the tail section to clean up the rear. That ruins the bikes ability to keep water off of you on wet roads. I do like replacing lightbulbs with LED. LED turn signals and flasher relay. That gives you the extra power to run the heated grips and heated gear. And no bike should be on the road without a radar detector.

[@stefanwong5297]

nice video.helped a lot.just noticed you put a 190/55/zr17 instead of 190/50/zr17.doesn't that effect the handling of the bike or just for looks.thanx

[@mikehillman3144]

Fantastic video! I just did my sprockets on my ‘05 1000rr and did -1 and +2. I now need a speedo healer because my speedometer is all jacked up. Can you tell me where the harness is at? I just put new fairings on this weekend and couldn’t see it anywhere. Is it under the tank?? Thank you

[@justaguy4real]

4:45 so interesting how splines are the very basic 'grip' that gets machines and parts moving/turning/spinning

[@alesqs11]

Excelente tutorial !!! gracias por tu aporte

[@kakhaberseturidze]

Nice video. I saw you just cleaned out a clutch push rod... it doesn't need to be greased? Cause i'm not really understand how it works) thanks...

[@pistarddulundi.7902]

Slt et merci ,j ai pu tout faire moi-même grâce a ton tuto👍✌

[@islandlife4141]

The big one on the rotor size.. that's where I messed up. Ordered new rotor, caliper, and caliper holder, and screws, tore those up

[@601nate4]

Awesome video bro!! What size socket was the axle nut?

[@dedricbullock5567]

Thank you plenty

[@zopitogelsumino3986]

Buongiorno,io ho cambiato tutto corona pignone e catena,ma o rimesso la pompa frizione ma la leva frizione va a vuoto non stacca più,sto facendo lo spurgo ma non va,se mi dai un aiuto mi fa piacere Grazie

[@woody3476]

11:05 such a corny joke, but it had me bust out laughing 😂

[@anferny8]

Amazing video, thank you so much for this.

[@austinneumann4362]

For some reason I am having trouble getting the cover off like something is not clearing, do u have to angle it a certain way?

[@gordonjmuzik]

I did this last night...thanks to this video...but when I got ready to take my bike out the clutch lever on the handle bars was too tight. I tried shift but luckily the kick stand was down, so it died but then it wouldn't let me shift into neutral. In this video his elbow was in the way but is there a silver piece that goes inside the slave cylinder housing? Or did I improperly mount the linkage?

[@RideWNC]

Gordon Jackson There is only the counter shaft cover, the Slave and the clutch push rod along with the bolts holding the slave and cover on.

[@nomusplenus]

Just to repeat everybody else - gr8 video!

[@SRDkottenmouth]

Thank you very much, what year was the bike?

[@RideWNC]

Kotten603 Since the bike has OEM black plastics, I will say it is a 2007. They are all about the same drive line, from around 2005 to present.

[@kedde2005]

About to do this on mine (cbr1000rr 07) since i want to clean at the front sprocket. Anything specific to do while taking that slave cylinder thing of? and that rod thing.. Im a little nervous about it, but i know my way around bikes, but this is a first where i see that thing blocking the front sprocket. Cheers!! :)

[@RideWNC]

I think you will be OK. Take pictures of every step. Then you have something to go by when reassembling it.

[@HalfdeadRider]

Nice vid mate, hope the cat is doing good :)

[@damianc6712]

thanks for the video my friend, it help out a lot

[@jonnyflrs90]

I forgot to take pictures and mark wich bolts go where. Can you let me know where each bolts go? I think the two long ones go on the cover to the right and the two medium go in the slave cylinder and the short one goes by the hydraulic fluid hose?

[@michor10]

Excellent video. Thank you.

[@abspeedy1779]

Great job!!!

[@DavidM2002]

This must be an older bike ? Didn't they switch to a cable clutch in 2009ish ?

[@RideWNC]

That is a 2007. 2008 got the cable. I have a video out here somewhere for a 2008.

[@nyjayjr2803]

what chain & sprocket kit did you use ?

[@Ch0k0TB]

Im about to change the chain and sprockets but i see different types of front sprockets. Some are bulkier in the middle where others are flat. Does it matter when the teeth count is the same? In you occasion its the same situation.

[@RideWNC]

Just buy a good sprocket. You will be ok. Some have a rubber bushing. Not important.

[@Ch0k0TB]

@@RideWNC thank you very much!

[@joeblack5517]

Im having the same problem other people are having .when i pull in my clutch lever i have zero pressure. Ive put on taken it off, i just dont understand.

[@RideWNC]

Flush the fluid in the system. Make sure to bleed the valve up top by the lever. This is where your issue is.

[@fightworn_boxing_memorabil8259]

With which nm at sprocket ?

[@Jrevo420]

Great video

[@joesmoke9624]

Excellent and well presented

[@Slaveryis1greatthing]

Great video brotha

[@vincetaylor3948]

Really good video much appreciated

[@anthonya.santana8278]

thanks for the information

[@91TwinTurboZX]

Does the front sprocket have any play? Not front to back but side to side.

[@RideWNC]

Usually.

[@williamalmonte4541]

Thanks for the video.

[@bad_vaporizer]

thanks for the story about the cat. lol

[@savvas77]

do you use blue loctite on the front sprocket?

[@RideWNC]

Never. You want to get it off easy next time. If you tighten it down, it won't come off. No need for Locktite.

[@maxime0999]

Got myself some coke (8:40), and accidentally did the valve adjustment....

[@ivanitu]

Hi dude. Can you help me? The pipe that you remove at 1.37 , mine just disconect on the top and i dont know where to plug in. Neither find answers in internet or his utility. You know whats his function?

[@RideWNC]

Bottom of the gas tank. Breather/Overflow. You do want that connected.

[@scarf459]

Thank you sir!!!

[@snitzel01]

nice

[@roadrash8334]

if the bike is put into first gear while that goldish rod is out will that do it?

[@RideWNC]

+Will Hamilton Are you asking about the Clutch push rod? Nothing... Hit the shifter and knock the bike back to neutral.

[@roadrash8334]

+MikeE RideWNC that's what I did. I was just curious if 5hat may have messed something up

[@roadrash8334]

+MikeE RideWNC I pulled the clutch lever a bunch of times and it built up the pressure in my hydraulic clutch to make it work again. same thing as your back brake when you take your tire off you gotta push that brake a bunch of time befor it works properly again. I pulled the clutch probably 50 times then tried to ride it and it has been perfect ever since

[@bears893]

what program are you using to edit your videos?

[@RideWNC]

QuickTime to chop it up and Sony Vegas Pro to add voice.

[@waynetucker5204]

What axle grease do you use?

[@RideWNC]

I use Lubrimatic Marine Grease. Remember, you are not lubricating the axle. You are protecting it and making easier to remove next time. Nothing should be spinning on the axle, if there are wear marks on an axle, you should be inspecting the wheel bearings and considering replacing them.

[@toddmarino]

what size are those sprocket nuts?

[@RideWNC]

Looks like 17mm.

[@lililililililili8667]

There can always be more Rs there is the CBR 1000RR R SP now

[@RideWNC]

DID 530 chain and 530 sprockets from SprocketCenter.com

[@larobfaithful]

Where are you located?

[@RideWNC]

Murphy, NC - Close to town.

[@islandlife4141]

Looks like the hose sticking out at 24:45

[@RideWNC]

Pretty sure the is the gas tank overflow. I don't currently have a 2007 CBR in the shop to look at.

[@leeyork5473]

Frick’ n Hilarious!! Gotta get those cats neutered

[@9011combo]

I like the stupid white cat story lol