Using a Mastermind GT/22 with a Fractal Audio Axe-Fx II

[@BrandonofRedemption]

One of the best midi boards I have seen to date.

[@CARLOSVENTURES]

I agree with Erick. Please make a video with ULTRA-FRACTAL AUDIO. I am almost buying a RJM device!!!!

[@2112GK]

In explaining the phantom power set up, you say to take the cable from the GTs midid output and instead plug the nectar into the phantom power box. Then you say on the other side of the box use a 7 pin connector to plug into the Mastermind GT's MIDID output. How can you have tow cables into one output jack on the Mastermind GT. did I miss something? Please explain as I am strongly considering getting one for my Axe and want to know it can be properly powered.

[@rjmmusic]

You use one 7-pin cable from the MIDI output of the GT to the phantom power box. Then, a 5-pin cable from the box to the Axe-Fx MIDI input.

[@ErickGonzalesF]

Make a video with the Ultra!

[@darkx2001]

Do I need the axe fix to use the mastermind? Is the mastermind useless alone? Please help I am so lost.

[@neddistanz]

I am running a mastermind gt22 into my rack rig which consists of a marshall JMP 1 preamp a TC electronic G-Force into a power amp what I want to know is if I get an AxeFx II will I be able to use my Mastermind to recall scenes that I program in my presets?

[@rjmmusic]

Yes, you can use a GT to recall scenes, no problem.

[@neddistanz]

@@rjmmusic ok i have it all set up and have not been able to find a way to change the scenes using my existing button configuration - please help

[@rjmmusic]

@@neddistanz Please send your settings file to [e-mail] and I'll have a look.

[@jaronensley]

I am digging the background music on this video, who is it? Where to buy?

[@rjmmusic]

That's our friend Dave Weiner (www.daveweiner.com). He plays in Steve Vai's band and has a couple of great solo albums, which that song ("The Mojo Rhyme") comes from.

[@jaronensley]

Thanks

[@AndySimmonsOfficial]

Hello! Can I change channels from my amp with the GT/22 the same way I do it with the normal MIDI foot controller?? Thanks

[@rjmmusic]

+Andy Simmons If a normal MIDI controller can do it, the Mastermind GT can definitely do it!

[@andrescappiello1514]

Can I use it with my Fractal AXE FX Standard? I though that I've seen AXE FX STD in a LCD Screen

[@rjmmusic]

I have not personally tried it with a Standard, but it should work.

[@thelstancroix7555]

I've been searching for presets for bass guitar, would this be a viable preset pedalboard for bass?

[@rjmmusic]

It depends on what equipment you're using. What do you have that needs to be controlled?

[@thelstancroix7555]

RJM Music Technology Inc, I mean to have a bass guitar running through it, and if there are any bass heads, cabs, pedals, etc. available with Axe Fx 2 to use for any bass rig/set up.

[@thelstancroix7555]

RJM Music Technology Inc, which could be used through the pedalboard as well, or would I have to purchase something like this specifically for bass? I'm a bit confused as I've not seen anyone really test this on bass.

[@rjmmusic]

We don't have a lot of bassists, but it would work just as well in a bass Axe-Fx rig. Your Axe-Fx presets would be configured differently, but the Mastermind GT setup would basically be the same. You might select different effect blocks to control, but the instructions in the video still apply.

[@thelstancroix7555]

RJM Music Technology Inc, oh, okay, thanks. I'll look into it.

[@andrescappiello1514]

Where can I buy it on Argentina? Greetings!

[@rjmmusic]

www.gearhaven.com.ar can help you out!

[@ryankharl]

Hello can i do this with my MMGT 16?

[@rjmmusic]

+Ry Karl Yes, definitely!

[@ryankharl]

Thanks.. I tried it a while ago but when i press start, the LCD is not loading the presets. What should i do?

[@rjmmusic]

+Ry Karl Make sure MIDI Bidir is turned on in the GT's MIDI settings. Also make sure that your MIDI cable has all five pins wired through - not all do. Also make sure you're running the latest firmware on both devices.

[@ryankharl]

Hello, i checked and the MIDI BIdir was already turned on. My set up goes like this, i have an mini amp gizmo, effect gizmo and a fractal Axe II connected. I have checked the midi cable and it is 5 pin. However, i cannot tell if they are wired through :) Yes, i am running the latest software.

[@rjmmusic]

+Ry Karl The Axe-Fx has to be the directly connected to the GT, no other devices in between. If for some reason it can't be connected directly, you can connect the Axe-Fx's MIDI output to the GT's Remote In using another MIDI cable.