I Made THE BAD BATCH From Cardboard Boxes!

[@jasonalcatraz5817]

Big time cosplayers: The best material to work with to get the best look is EVA foam, cardboard will never match it. RJR: Hold my box cutter

[@Valentina-uc2sr]

EVA foam for armor and these kinds of helmets sucks ass because it deforms pretty easily compared to hard plastic or something like resin. I have seen Mando helmets made out of cardboard and fiberglass and they look 100000 times better than foam ones

[@jasonalcatraz5817]

@@Valentina-uc2sr You can harden EVA foam with heat to prevent it from deforming, but it is admittedly easier to bend and deform with use. I'm no professional, but I've seen professional outfits last a long time.

[@flynna]

That's why more people are moving to 3d printing for armour, or often products like worbla. Eva is good if you coat it properly and need heavy looking armour such as for warhammer 40k

[@mutzel0780]

Eva foam is reallyyy cool, but it's expensive and cardboard is something you have at hoam. That's why it is so awesome!!! :)

[@milesfuller6161]

@@mutzel0780 "hoam"?

[@_CarlosTe]

THIS IS GENUINELY AMAZING!!!!!

[@Tekkmothebot]

No esperaba verlo acá señor Carlos te

[@juanjosecortesquiceno4683]

Lo emos encontrado, emos encontrado al señor Carlos Te

[@_CarlosTe]

@@Tekkmothebot hahahahahaha

[@_CarlosTe]

@@juanjosecortesquiceno4683 🤣🤣🤣🤣 aquí apreciando buenos videos!

[@Martinuquio]

:O

[@mythic6415]

“Impressive, most impressive” -Darth Vader No joke that’s insane it doesn’t even look like cardboard that absolutely incredible maybe even ur best helmets you’ve ever done u just keep getting better!

[@des_terminus607]

Those look sickk 🔥 Heres a suggestion: Arc Trooper Fives Keep up the great work Ryan

[@Dani_Hwk]

I need those templates!!! Amazing job dude, they look awesome

[@blikkie_ijsthee4543]

They look amazing! Can't wait for Echo and other future projects!

[@cadbane2411]

Echo: am i a joke to you

[@francisabellana445]

Welp

[@daggerwetzel1437]

Who?

[@Guitar289]

The rest of the team: yes

[@myka4329]

Cad lame

[@cadbane2411]

@@myka4329 i would be careful where i was sticking my nose if i were u

[@henryferguson2846]

THAT LOOKS FREAKING INCREDIBLE!

[@Axidic]

it looks like is 3d printed , looks good

[@MandoStudios]

That’s so insane, they look so good! I can’t believe that they just started as sheets of cardboard!

[@leilanihawk4530]

Why did I just realize the intro was like the actual Bad Batch intro.... THIS IS INCREDIBLE

[@ChristopherRo190]

How much would I need to pay to get the templates for the tech helmet. IT IS SOOOO COOL!

[@diyrepublic8436]

this was definately worth the wait! they all turned out incredible. probably your best and most accurate builds so far!

[@adamlarson6821]

Cardboard truly is one of the most underrated crafting materials! Great job! you are so talented! Subscribed! 😁

[@vorton5519]

AWESOME HELMETS! Looks like they came straight out of the series!

[@zacharyh3474]

I thought they had 🤣

[@probrix9159]

This kid is going to Hollywood as a costume designer

[@Baby_Bebbi_The_Fur]

Amazing!! I love how all their helmets turned out!!! You truly are talented. I especially love Tech’s since he is my favorite!! Can I share a fear I have about season 2 of the Bad Batch? I’m so scared of something happening to Tech in the next series. If they were to kill off anyone, it’d be Tech 😭 Reasoning: Echo wouldn’t be killed since he’s already technically died and has been through a lot, and was not one of the original bad batch. Wrecker wouldn’t be killed off since he’s the comedic relief, and has already been through executing order 66. Hunter wouldn’t be killed off since he’s the leader of the squad and the main Batch member (according to the show) and is the father to Omega Omega would not be killed since she’s basically the focus of the show, and is needed to keep the show rolling. Crosshair wouldn’t be killed since he’s the main antagonist and is technically not a Bad Batch member anymore. Aand who does that leave? The one who, according to the trailers, looks like he’s going to be more of an important character in Season 2? The “side character” smart guy: T E C H. PLEASE DON’T LET TECH GET KILLED.

[@fishstyx5945]

🥲🥲🥲

[@someadvids5655]

I wash all kids was like you making stuff with there own hands, its just such an enjoyable think to do, all the things you make are just fantastic and incredible mate! much respect! i think it seems to be a lost art nowadays, ive allways loved making stuff from an early age, much love to you chap, take care and peace all!

[@NotSoMagicMerlin]

Techs was by far the best I think Hunters might need a bit of an upgrade along with Wreckers

[@DarkDioStudio]

Amazing job. Your paint job was on point!

[@meepztoons]

Yes yes yes, I need this to help me with my Echo helmet

[@andrewperez9284]

Every cut, and bend, and shape you make I keep saying "Man! he is so clever!" Haha, I must've said that about 200 times while watching this video. Incredible work as always

[@starwarsdeutsch8306]

I respect you for pulling off something like that 👍👍👍😎

[@cathademicscholar3680]

okay uhh WOAH your attention to detail is astounding, and your templates are SO precise, i'm really blown away!!! amazing work!

[@HylianLegend-fl3xk]

As a fellow cardboard armor man, I just wanna say you’ve been doing some amazing stuff!

[@_thomas1031]

These look SPECTACULAR, MATE!!🙌🙌🙌 Amazing detail and construction!

[@samsarmory521]

Good job, they look authentic to the movie!

[@bennettmartella8831]

These ones are easily the best ones yet

[@ichiro5644]

Echo: really….. Also Echo: *I’m worth more than 2.000 credits on Ebay*

[@shayanedesilva619]

😂

[@sausagethegodofcurry]

This is absolutely awesome! You wouldn't happen to have templates would you? I really wanna make wrecker's helmet

[@AncientLordProductions]

YOO NICE LEGO REPUBLIC ATTACK SHUTTLE IN THE BACKGROUND

[@shaycroke9346]

Them 4 helmets from The Bad Batch will have their new style of Bohemian Rhapsody next. 💯💯💯

[@yumanoid5753]

Amazing. These are very pretty and i applaude your craftsmanship!

[@RedBlueSteelCosplay]

This is really really amazing! Looks legit wouldn't think it'd be card board

[@stevenhuffman4525]

Awesome work. They all turned out great. The detail, especially on Tech's helmet was so good. I have been wanting to make a Wrecker cosplay. This gives me a lot of ideas on how to start.

[@issieplayzzz361]

Those helmets are probably no joke better than most 3D printed helmets I’ve seen! I have a suggestion tho, for a fives helmet but take your time, I know you’ll eventually get to him

[@RDR911]

You must’ve not seen any 3D printed helmets, then, cuz… 👀

[@issieplayzzz361]

@@RDR911 I have, followed and subbed to galactic armory who makes quality 3D printed helmets and armor and for a budget like $30 this is the most accurate helmet compared to a finished 3D print unless of course, you don’t have the money or knowledge to run them. Remember he’s 15 and this good at making stuff outta cardboard. Stop hating

[@sofiacosta5729]

All I wanted for my 14th birthday was a mando helmet, but my mom said it’s way too expensive. Little does she know I’ve been saving up the cardboard boxes..😈😈😈

[@mintfrost427]

Bro I rlly need these templates 😭😭 AMAZING JOB!!

[@calebcustombricks2631]

Absolutely amazing! I want to do something like this myself

[@beargod4166]

This must have taken a long time this is the best project yet!

[@xavierbowles5328]

This is so cool!You made cardboard look so realistic! This is absolutely stunning.You did such a fantastic job on this!

[@nicholaspeng6611]

SICK!!! The Crosshair one looks awesome

[@Samuelto2005]

I just see 2 problems: 1 in the teck helmet, the glasses have to be removed and then put on, and that can be a lit bit uncomfortable, I think they should be on the helmet itself; and 2, no helmet has foam rubber inside, so that it is uncomfortable to wear the helmet, and so that it does not wobble ... Apart from that, this video is a fucking wonder, and I'll make all 4 of them, in foam ... Wish me luck 😉

[@singlish76]

Plz sell these on Etsy!!!! Also can you make Echo's helmet next?

[@braydenhafen8912]

Can’t believe that helmets that good looking are made from cardboard! Keep up the great work 😄

[@morea-manclark5711]

Only 6 more hours left, so exited can't wait to see how they turned out!!

[@cheechx6701]

where are this guys deserved 1 million subs

[@KristianB07]

Bro those are actually sick!!! Techs is probably the most creative Imo, and btw nice house 👍

[@marvelageofcomics2998]

Would have been great if, along with the reference pdfs from the link below, you'd include printable cut-out templates with the proper sizes of all the pieces. THat would be a huge help.

[@ScorchedStopmotions]

Man that is so cool! Now all that is left is the armor!

[@kourtneyhoover7329]

I'm definitely going to try and make these helmets, however would there be a possibility you could make your template useable by other people? I don't know how well I would do with having to recreate the same template you used in the beginning. If not, I'll do my best XD Great job nonetheless!!

[@clonebois]

Holy cOW! that's so cool!! Cannot believe that those are cardboard!!! man, it's so cool seeing how the new crosshair compares to the original one you made!!! Great Job man!!

[@adamsutton1748]

Bro this is amazing! Some friends and I are making Bad Batch costumes for Halloween and this video is astronomically helpful with the helmet making process

[@Vinces_Animations]

I know it’s cardboard but I’ve almost convinced myself it isn’t!

[@arquitensproduction8001]

This is amazing! I never expect someone to create good and smooth looking props from cardboard. One question, though? How durable is this? As I usually bump into something when I'm wearing and some other stuffs

[@rjr_productions]

With the resin on it, these helmets are very strong.

[@arquitensproduction8001]

@@rjr_productions ah, I see. I have never worked with resin on cardboard before so I had no idea how durable its going to be. I'm still very new in prop making. Thank you very much for answering!

[@harkiratgolar1879]

My friend, your crafting is magnificent! I'm immensely impressed, as always, at the commitment and effort you put in. Keep up this fantastic work mate; good job!

[@blazar1442]

Now we need the full armour, and blasters

[@infernothegreat1041]

I love all of these. Tech’s definitely my favorite

[@thomasvandegriff5938]

The helmets are looking insane as always, and also I’ve noticed your editing is also on point 🔥

[@clive813]

Those look really nice, can u like release a pdf or step by step instructions on how to make these or a template, they look really good and i would love to make these on my own

[@shlokasambhare2573]

And it’s amazing the amount of patience you have

[@TheGeronimojack]

Awesome work! I see that many builders are making SW helmets. Would you make an Imperial Snitch ( SW 1977) or Garindan mask (The Mandalorian)? I have not seen ANYBODY make that yet. You would be the first one.

[@CC-7567-REX]

You should sell cardboard helmet kits with all the given parts labeled and cut out

[@currenluft1680]

Man, you’re talent with cardboard shows now bounds😎

[@slimegir1956]

I’m confused on how you get it to fit so nicely together. Whenever I make cardboard things there’s always gaps that I have to fill with hot glue and there’s hot glue everywhere. How do u do it so neatly??

[@Mel-rf4jv]

Amazing!!! Ik u made a crosshair but can u make the imperial version of him plzzzzz?????

[@JGDeRuvo]

GREAT BUILD! Any templates?

[@Xcvbbnmlkjhg]

You should make Commander Bacara's helmet/armor. I think It would look SUPER SICK!!!

[@TheDovahlemon]

Would it be a good idea to use resin as well when it comes to your other tutorials that don't originally have resin in the build process like your mandalorian armor build so it gets a cleaner look with less of the coregations showing through

[@shavlabofair7993]

Awesome job my friend, will you post the templates?🤩

[@rustybricks2950]

Yoooooooo I used to make these but not at the same level! You’ve taken cardboard props to a whole new level my guy

[@unsal7milk]

His voice: Who the heck are you!? Puberty: vengeance

[@gigabrando451]

Woah you are truly talented man. You never fail to impress me Ryan 👍

[@shlokasambhare2573]

Ryan you are honestly the mossst underrated guy on KZbin. I have been watching your channel and talents grow for the past two years and the fact that cardboard is such a common material makes it even better no power tools or fancy equipment or anything I tried Rex and bobas helmets myself and I can’t say they are anywhere near what you do 😀

[@eastonnielson7090]

Love the work man keep it up. Can’t wait for Echo!😉😉

[@tyathedude]

That was quite an impressive display

[@iheartsw]

I can't wait for Echo!! I want to be him for Halloween!!

[@ightningy5375]

That’s awesome one problem you forgot Echo

[@rjr_productions]

I never forgot echo. Go check my community tab

[@ightningy5375]

@@rjr_productions ok I’ll do that also good job man!

[@drewdog969]

I like the editing style good job on the vid man

[@mint1372]

I would really love to see a new and improved full body phase 2 clone trooper armor!

[@fairyofdoom5009]

dude, this is freaking awesome. I've tried making helmets before and lost my sanity a few times lol, but you seriously are so awesome!!

[@FrontlineArsenal]

Thought about using foam?

[@matthewmcvey3494]

I don’t know which helmet you did the best job on because they look like perfect replicas

[@titangamer6824]

Hey i was thinking of making clone cardboard cosplay during the summer, this is convenient!

[@yerielsantiago9204]

Rip Tech 😢😢

[@savagefam1205]

They look amazing RJR in fact you are the best cardboard prop maker in my opinion

[@sharkpants5829]

You should make Echo's helmet next to complete the set! Maybe make that weird lobot part of his head as an attachment!

[@Ibens_Inferno]

It would probably take him over a year to make all of them, but making the armor for the batchers would be the coolest thing I've ever seen.

[@Xcvbbnmlkjhg]

I think those are some of your best work! Keep it up!

[@H_T_S-1]

THIS IS SICK🔥 Nice work Ryan! Could you sell templates for these on your etsy?

[@frankv6459]

Great job !!! Wish I had the talent to do this

[@donnycarlo11]

You should totally make a Fennec Shand helmet!

[@pinkred22]

Do you have the templates for these helmets that can be downloaded or something? I really wanna make one now

[@hanxxor]

You are a gifted artist!! Amazing helmets… Keep it up!

[@TheDovahlemon]

you should also do the heavy infantry mandalorian helmet! it's such a cool design

[@kennethaungst813]

these look amazing! any chance you can share the templates?

[@blueroomstudios1677]

DUDE. THAT IS AWESOME! so excited for this one!

[@inaktiv..]

Really hood videos and the Helmets are awesome. Can you do next Commander thorn please what will be very nice😅😅 and sorry for my bad english im from Germany😅

[@piecemaster14]

Oh my word I can't wait I'm so excited. The thumbnail looks awesome

[@sarodip4179]

Another great video! But have you tried to reinforce your helmets with epoxy resin?