RNS Tripamster XL2 TUTORIAL

[@filippocolombo4705]

Bellissimo e utilissimo tutorial, e Michele e una persona di rara disponibilità. Grazie. 👍👍👍

[@Raid2roues]

Hi Michele, Sorry for all my questions but I ve still one😅. First congratulations for your 2nd place, it's Amazing! I m doing the last work on the bike before my first one at the Swank. And maybe you can help me ... Do you think the better way of trip master wheel calibration is: Auto or adding a circonference but which one, what is the way to mesure it? Thank you very much

[@skuomno]

Hi, thanks so much! About circumstance, usually the administration let you mesure with one kilometre the perfect value before a race. In long raid i suggest to use auto cal feature because it understand if you need more or less circ value due adjust during race. If you want to set the perfect circ value of your front tire you have to measure it with a soft meter and set the value on the instrument. 😉

[@Raid2roues]

@@skuomno thanks a lot👌

[@Raid2roues]

Hi Michele, maybe you can help me. I just bought a second hand Rns xl. Sadly it arrived at my Home with the upper button in Bad way. There is a littel gap between the button and the aluminium case. I try Switch between modes and it seem that it don't work 😥. I contact the seller about it but still no answer....😣 Maybe i make something wrong. There is two battery inside, screen work (it show trip1), i can Switch with lower button between 100 and 10m but no more else😥. Do you know if it must be connected to a 12v power, to can do it? Or maybe like i think, the upper button is disconnected and just don't work😴 and i spent a part of my budget for nothing... If you have any advice 🙏 I took a look inside and i don't know if i can remove the waterproof "glue" there is inside to can check the connectors... Thanks for your vidéo and your time

[@skuomno]

Hi, what I can suggest you is to use a thumb control. In this way you can use all functions directly from your handlebar. Yes, without the upper button you cannot use a lot of functions. Please don't remove the silicon seal inside, that protects all electronic stuff. The RNS is compatible with the cheap ico thumb control, so you can try that first.

[@Raid2roues]

@@skuomno thanks a lot! i thought about it, i m waiting for the remote that will arrived soon, i will try👌 I Hope it will work,Thank you✌️

[@skuomno]

@@Raid2roues nice! Let me know!

[@Raid2roues]

@@skuomno hi Michele, I tried with the remote and it work 😁!

[@marco-phen-loffredi1203]

Molto chiaro e utile !!!!

[@skuomno]

Marco -Phen- Loffredi grazie!!!

[@marco-phen-loffredi1203]

puoi aiutarmi per la connessione (solo pos e neg) del trip RNS ?

[@cabrassobreruedas]

its fine!

[@lucaciaroni7661]

Se lo volessi levare e per sfilare i cavi senza smontare la moto li tagliassi rovino qualcosa delle parti orginali della moto? Se non erro è una cosa a parte giusto?

[@skuomno]

Dovrebbe avere i connettori, alimentazione, frusta ruota e pulsantiera. Non c'è bisogno di tagliare i fili.

[@giampirex66]

Ciao ...ma l’orologio una volta settato non rimane in memoria ?se spengo la moto mi si azzera

[@skuomno]

Ciao, cambia le due batterie a bottone all'interno.

[@giampirex66]

Michele Cotti aka Skuomno ok grazie mille

[@giampirex66]

@@skuomno Devo smontarlo dal supporto o c'è una finestra?

[@giampirex66]

Michele Cotti aka Skuomno grazie...sai per caso anche i cr delle batterie?

[@stradepolverose1167]

La retroilluminazione come si regola?

[@skuomno]

Non si regola, si accende quando è alimentato esternamente.

[@stradepolverose1167]

@@skuomno Grazie molte Michele , sempre molto preciso👍ho cercato dappertutto senza trovare nulla a riguardo . Io ho XL3 Ma credo sia uguale ...neanche il suo manualetto d'istruzioni riporta quanto tu hai appena chiarito Grazie ancora.

[@skuomno]

@@stradepolverose1167 grazie Antonio!