I CUT the back off the PATROL… But it was WORTH IT!!

[@shxdow-of-death2071]

Hands down best 4WD KZbinr

[@RoamLyfe]

Appreciate that heaps mate!

[@brocknairn8668]

100% the best

[@kadenmackriell4751]

My top 3, 1. RoamLyfe 2. Tj&mac 3. Either builtnotbought, or 4wd247

[@RobWilliams4x4]

Best designed rear bars for offroad in terms of toughness and clearance. Had on on my old GU but made by a mob from Beenleigh called Patrol Customs, not sure if they are around still though. Good job with the fit up 👌

[@RoamLyfe]

Thanks Robert! They look so tough!!

[@Julius.H23]

It still amazes me just how much you know and how much you know what to do! Patrol is looking PHAT 🤙🏾

[@marty754]

Great video , and a nice 'light weight bar' install, I love pipe work bumpers in general. Will have to fit one of these to my Y61 eventually. I think a steely on the spare makes more sense as my DT2 dirty life rim on my factory spare in seriously heavy just with 285's LOL , maybe steely is the way to go for spare in future. All in all u did a tidy job mate. 🙂Love the pup , he has a great puzzled look in general LOL.

[@Stevenk770]

Looks mint, the rear bar looks similar to the tidy fab one. Also led autolamps and another company make very slim (8mm in height) stop/tail/indicator combo lamp which would suit the rear I reckon.

[@koicolo1791]

The WAGON is looking deadly! 🔥🔥🔥🔥 She’ll definitely rip the tracks! 💀

[@RoamLyfe]

So keen to start taking her out 🔥

[@asa572]

Looks good. Ground clearance at the rear is the same. Ahhh towbar life!

[@jonesy69420]

Mate, I love this patrol, its bloody amazing, I have a suggestion, you could maybe run a bar from the rear bar, to the sliders, just for a little bit more protection, and it just looks better, especially once u get a bull bar and bush bars/ side bars (whatever you want to call them) love the content man, keep going, good to see another Aussie on KZbin, especially a four wheel driver.

[@RoamLyfe]

Thanks heaps mate!! Appreciate that!

[@brytonscott3504]

Looks bloody mint mate can't wait to see it with the bullbar aswell

[@RoamLyfe]

Yeww so keen to get it on!

[@TheLeeman2011]

Killer content as always. Hopefully you crack 50k subs before Christmas. Keep cracking on and hope you and your family have a great and safe Christmas 🎄

[@RoamLyfe]

Thanks Liam mate! Hope you have a great one aswell!! 🤘🤘

[@onlycars22]

The whole thing looks so good

[@onlycars22]

What

[@hayleywhitmore3084]

Should make a bracket to connect the swing away to the barn door, makes life easier so you only have to open the doors to get into the boot. Trust me, the swing away will get old real quick if you have to open it every time you want to get in the back, been there done that. Vids are sick btw 🤙

[@RoamLyfe]

Yep I’m with you!! Would be a good episode to film for sure!!

[@SHOCKcustoms]

Great good mate. The minticle continues. Make sure you paint the inside of the infill panels then fill ot eith fish oil. Itll rust from the inside out if you dont treat the internal welded steel. Cheers bud

[@RoamLyfe]

Hey mate! Already done, I drilled two 12mm holes with grommits and sprayed cavity wax all inside! This way I can re do every year!!

[@SHOCKcustoms]

@@RoamLyfe #legend

[@Ripply774]

Looks awesome mate, loving the build and cant wait to see the bull bar on it to

[@RoamLyfe]

Thanks mate! So keen for the bullbar

[@bigstickerperformance6670]

Yeah mint! Good to see a clamp on the bench drill 👌

[@gabebuiatti6907]

Where was this video when I fitted my bar 😂 Good to see you had the same troubles. I do recommend putting a hole in the quarter plate of the bar so the rocks and mud have a way out 🤙

[@RoamLyfe]

That’s a great idea!! Cheers mate!! Was a bit of a mission but worth it hey 🔥

[@lachlansciberras1330]

Looks mint bro keen to see it with the bull bar!

[@malcolmhay6668]

Yes man looks absolutely sick.....love the close up shots of Diesel.

[@RoamLyfe]

Thanks mate!! Haha he was so funny in this!

[@mikemorgan4670]

Awesome bumper. Really like that style. Great episode.

[@RoamLyfe]

Thanks Mike!!

[@malcolmhay6668]

Love the close up shots of Diesel....!!!!

[@davidball.]

I’m always waiting for another Roam Lyfe video. And it’s here.

[@RoamLyfe]

Thanks David, sorry mate life’s been hectic latley!

[@davidball.]

@@RoamLyfe I don’t mind the long breaks in between uploads. Always put your family before anything else and I understand that. Thanks for always putting out great content

[@jeremyharris4415]

Looks great mate what and improvement you just need now is a Bull Bar for the front and a winch then you will be way luffing

[@RoamLyfe]

Should be here this weekend!!

[@CatNamedMilo]

The wagons coming up so nice now!

[@RoamLyfe]

Thanks Dylan!!

[@martyferry2678]

Looks killa can’t wait to see it all together

[@RoamLyfe]

So keen to get all the parts together!!

[@AussieOutdoors4x4Advetures]

I actually love the look of the swing away bar

[@RoamLyfe]

Definitely much tougher hey!!

[@AussieOutdoors4x4Advetures]

@@RoamLyfe 100%

[@TG-zd9de]

Still got that red dirt! That bar work looks mint.

[@RoamLyfe]

The shit is everywhere hey!!

[@bigfishfishing-111]

Super nice looking Patrol m8

[@Patrols4Lyfe]

I reckon add a Roof Rackin it and also make up some side rail guards have a good one mate

[@RoamLyfe]

Thanks mate I’ve been looking at a few acrually!! Keen as to get one!

[@Patrols4Lyfe]

@@RoamLyfe 100% Bro it’ll tie up the rig

[@trickster8635]

Looks awesome, weights a tonne. Every kg you add, takes away carry capacity.

[@xtdman345]

No protection for the pooey from the hot metal shards coming from the grinder?

[@jbrizz99]

You should do some seam sealing, undercoating and cavity wax on the inside of those cavities after the quarter chop otherwise in a few years you might start getting rust come through from the inside.

[@RoamLyfe]

Hey mate! Already done, I drilled two 12mm holes with grommits and sprayed cavity wax all inside! This way I can re do every year!!

[@jakesloan5863]

did drive through canugra yesterday arvo think i saw ya

[@adamsankey8702]

Mate dead set you improve your skills in every episode. The GU is looking amazing as well as those hats they are fire 🔥 I would purchase one but just lost my job and can barely live 😢 but I will be getting one that for shore 🤙🏼🍻🇦🇺

[@patrickwright3595]

Are the rear bar lights plug and play?

[@minzahhh1]

Starcrew gear goes hard af had it all on my old gq and he's prices are mint too

[@RoamLyfe]

So cheap for what they are!!

[@deklanbulder6549]

Where are the sliders from?

[@kurtnewport]

Hell yeah dude!! Good job, looks so sick

[@RoamLyfe]

Thanks Kurt!!

[@kurtnewport]

@@RoamLyfe makes me want to hurry up and finish my rock sliders over these holidays on my gu wagon!

[@coreybown9455]

“I went out and got some more safety equipment because safety first guys” has some sexy crocs on with sparks flying at his feet aha

[@RoamLyfe]

😆😆😆 crocs are basically just big spark deflectors

[@kodycorkett4612]

Just watch out for getting sparks on panels cuase can potentially burn into the paint. + can burn into tint. And glass (windows) so just be careful

[@RoamLyfe]

New hats available on the website!! Very limited stock 🔥🔥

[@koontproductions]

Nice work mate coming up mint.

[@RoamLyfe]

Thanks bro!!

[@jasonthompson4784]

Love the vids and content. However, just to be clear...by doing a quarter chop aren't you really increasing your departure angle? Not necessarily increasing your overall ground clearance...as stated - "look how much ground clearance we just gained". Looking forward to the 4jj1 swap...Steve from DCA knows his stuff when it comes to these diesel transplants.

[@RoamLyfe]

Yeah that’s true mate!! Kinda miss speaking there, definitely departure angle, held up by towbar now but with the ruts the way they are it’s improved a lot!

[@DBorgie69]

What make of bar was that?

[@can5806]

Hey, What is the wheel and tyre brand and model?

[@kodycorkett4612]

Absolutely love you man.

[@RoamLyfe]

Love you too bruh!!

[@claytonhill3136]

Need rear scrub rails now

[@1993Revhead]

Diesel lick of approval mate.

[@RoamLyfe]

My first one too 😆

[@daveoloughlan4543]

Love the rig m8

[@tomlloyd167]

I reckon do bull bar and spotties next

[@RoamLyfe]

Definitely on the list!!

[@JakeandHisLux]

Hey mate I’m about to paint my bullbar not sure what to use powder coat, raptor coat, super cheap paint😂 what did you put on the rear bar and sliders because it looks amazing

[@RoamLyfe]

Use some 2k enamel paint from a shop and spray through a cheap gun! Much better results and looks better than raptor!!

[@JakeandHisLux]

@@RoamLyfe cheers mate is it as strong as powder coat etc, would be easier to touch up too 👍

[@YoungCoolie]

Love this channel keep it up🤙

[@RoamLyfe]

Thanks mate!!

[@ivanmullet12]

man bar work just changes the look of a car! I need a new rear bar for my pootrol

[@RoamLyfe]

Made the biggest difference hey!

[@ivanmullet12]

@@RoamLyfe heaps different can’t wait to see what style front bar you went with!

[@harrysfishingworld]

Next we need the dual or single stainy snorkels

[@RoamLyfe]

Incoming early next year 💦

[@vincentmusgrave5043]

looks mint !!!!

[@zavierbanfield3285]

Hey bro. what wheels and tyres are you running. are they the same ones you ran on coal?

[@zavierbanfield3285]

and where are the Yee lee wheels that were on coal from?

[@RoamLyfe]

They are from yi li in brisbane! And new ones are dirty life enigmas

[@kobywright6771]

Should put a staino on it

[@charlescoppard543]

Love the patrol how it stands💪🔥💯🤩😎 👌

[@RoamLyfe]

Thanks Charles!!

[@williamnewchurch845]

Beast mode

[@roballan3626]

Clear coat let me introduce you to grinding sparks nice to meet you 🥵

[@RoamLyfe]

😅 she’s got ceramic coat so should be sweet haha

[@kyanbowker4957]

all about safety, goggles, apron, crocs

[@RoamLyfe]

Crocs are definitely at the top of the must have safety list!!

[@derekhawking6460]

Looks sick mate

[@RoamLyfe]

Thanks mate!!

[@trentgerlach6877]

How’s your shed floor holding up mate

[@RoamLyfe]

It’s actually perfect still mate!

[@Dallas-q9x]

Looks great - when do you plan to take it off road?

[@RoamLyfe]

Asap hahahaha

[@liamdr3815]

Good shit cobba!

[@RoamLyfe]

Thanks Liam!

[@bloorie87]

Love ya vids mate

[@rotthysgooglea1262]

Wicked vid 🤙🏽

[@RoamLyfe]

Thanks legend!

[@UnreelAdventurez]

Are u putting a bull bar on it? if so if you don’t have one in mind I highly recommend razlar bull bars because they look bloody mint on both gq patrols and gu patrols

[@RoamLyfe]

I’ve got one coming very soon mate! It’s gone be 🔥🔥

[@UnreelAdventurez]

Yeah sweet can’t wait to see it!🔥

[@ethanpolgardy5492]

Look tufffff. Needs a sun visor asap though 😏

[@RoamLyfe]

Bruh, I wanna order one asap!

[@frednerk7945]

Waste of money will never see dirt, perfect for the gutters at school run lol.

[@RoamLyfe]

Also at Woolies can fend off the grannys in their Corolla

[@elghee02]

Absolutely fucking beautiful, someone who has taste.

[@derJackistweg]

Welding zink coated stuff is very TOXIC! One must not do that! You can grind the coating off near the area you are welding.

[@Madmick82]

Looks mint

[@RoamLyfe]

Thanks legend!!

[@Odyssey_Off-Road]

Surly front and rear scrubbies !!

[@RoamLyfe]

Yep! Tryna find someone to do it now

[@aaronford7838]

Hey if you dent it just dual cab chop it

[@jarradmaate7883]

Look at the crocs on it offttt 💦

[@RoamLyfe]

Need a sponsor from them hahahaha

[@jarradmaate7883]

Roam lyfe crocs coming soon ahahaha

[@alexsteel8167]

🍻🤘🔥

[@stefano_nmd]

Safety Crocs

[@RoamLyfe]

Fully certified 🥵

[@The_zook_shed]

Respect lost for wearing crocs 😑 😆

[@MassacrePoon]

Cover the paint bruss

[@dylancoleman124]

"What are those"

[@avocadoarms358]

Do the front

[@lukeeveritt6719]

First one🎉

[@RoamLyfe]

👌👌

[@morgantaylor7209]

Shame you get your bullbar so soon. I’ve been waiting 4+ months for mine off jimmy sales. As well as many others. Suppose it’s because we aren’t influencers

[@RoamLyfe]

We arnt working together on this I bought it as a customer! Have been waiting 4 months but it’s coming on Saturday thank god!!

[@regkershaw]

Sorry I'm not liking the look. Hopefully it will improve when finished.

[@RoamLyfe]

🥲🥲

[@BigRed-MWA]

Meanwhile grinding sparks and over spray going over the other body panels! 😱😱😱🤣🤣🤣🤣👍

[@UnreelAdventurez]

But other then that it’s lookin like a weapon 👍🏼🤙

[@brentmcd12]

Go the Patrol! yeah that come up mint aye! interesting! 🛻📹😎🤙

[@RoamLyfe]

Thanks Brent!!

[@absolutelegend5519]

I’ve seen better lol rekt